Safety and Security Systems

Amphenol is a leading supplier of advanced interconnect systems for automotive safety devices and expanding onboard electronics in automobiles. These applications include entertainment, communication, navigation, and telematics modules, as well as engine control, sensors, actuators, and auxiliary motors. In addition, Amphenol has developed leading solutions for hybrid-electric vehicles and drive systems and is working with leading global customers to proliferate these advanced interconnect products into next-generation automobiles.

0.21mm HFMK Series (Non-ZIF FPC)

0.21mm HFMK Series (Non-ZIF FPC)

LOW PROFILE AND COMPACT

HFMK Series FPC is a 0.21mm pitch Non-ZIF FPC that is lowest in height suitable for applications where space is a constraint.

Low profile and compact
FPC locking arm
Single action Push-pull FPC termination

0.30mm Flex Connectors

0.30mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.

Amphenol ICC offers a full range of 0.3mm pitch connectors for applications where board space is at premium. Amphenol ICC’s 0.3mm pitch connectors are available in 13 to 51 positions.

0.40mm Flex Connectors

0.40mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. The SFGL series 0.4mm pitch connector offers a high pin count with a small footprint and includes such innovative

0.50mm Flex Connectors

0.50mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Amphenol ICC has one of the broadest ranges of 0.5mm flex circuit connectors in the industry.

1.00mm Flex Connectors

1.00mm Flex Connectors

Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way.

Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding.

As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.

1.20mm Wire To Board

1.20mm Wire To Board

Amphenol ICC's new 1.2mm pitch wire to board connectors are low profile (mated height of 2.50mm) and compact with pin count availability for 3, 4 and 6 pin counts. The plug and receptacle uses a frictional mating method to provide the retaining function to enable up to 20 mating cycles.

The low profile and compact design of the connector gives its advantage in applications where space is tight and the enclosed receptacle profile make sure that the side entry matings are easy in tight spaces. The additional polarized key slots prevent any misalignment issues between the plug and receptacle.

1.25mm Wire To Board

1.25mm Wire To Board

Amphenol ICC's 1.25mm pitch wire-to-board connector series is designed for a wide variety of applications in Industrial, Automotive and Consumer markets.

The range consists of terminals, crimp housings and PCB headers in straight and right angle, surface mount and through mount configurations. It is a single row design, available with from 2 to 15 circuits. A crimping application tool is also available for wire harness assembly.

Unlike many other products for the same applications, Amphenol ICC's 1.25mm Wire-To-Board range conforms to the EU Industry Safety Standard, PCB header material meets halogen free requirements and the products can be operated in the temperature range from -40°C to +105°C.

15mm position sensor/ potentiometer

15mm position sensor/ potentiometer

The N15 series offers an SMD and Through Hole mount solution for the majority of Position/Rotary Sensor and multi-purpose Control applications such as:

Automotive HVAC, Seat, Rear-view mirror actuator feedback sensors and HVAC Controls.
Temperature Control for Boilers, Wall Heaters, Showers, Radiators, Conventional and Microwave Ovens, Freezers...
Timer & Function/Programme Select for Washing Machines, Dishwashers and all White Goods in general.
Size and Position detectors.

Standard Features:
Conceived and designed for easy customisation.
SMD or Through-hole Mount.
Endless Rotation (360º).
Wide Electrical Angle (340º +/-10º).
Extended Mechanical Life (100k cycles).
Working Temperature Range: -40ºC to +120ºC.
Low Profile.
Linearity 3%.
Embossed Tape or Bulk packaging.
Reflow Soldering capability.
Shaft insertable from both sides.
Polarised "T" rotor (European Home Appliance standard).
All PT/ PTC 15 shafts compatible.
IP54 protection according to IEC 60529.

A15-3P 360º position sensor

A15-3P 360º position sensor

This device is aimed to applications that need on-field arbitrary initial and final travel reference points calibration. Once these have been set, the A15-3P provides accurate position feedback output to the controller.


Designed to be a cost-effective replacement for absolute encoders, the A15-3P series offers an SMD, Vertical and Through Hole mount solution for the majority of Position/Angle Rotary Sensor and multi-purpose control applications such as garage door oppeners, gauges, rotary actuators and robotics.

Main features
Electrical angle: 360º
Designed for direct input to microprocessor.
SMD, Horizontal or Through-hole Mount
Endless Rotation
Extended Mechanical Life
Working Temperature Range (-40ºC to +120ºC)
Low Profile (4.4 mm)
Linearity (independent): ±2%
Embossed Tape or Bulk packaging
Reflow Soldering capability
Plug-in shafts
Shaft insertable from both sides
Polarised "T" rotor (European Home Appliance standard)
Ideal for Consumer Control and position sensing applications
IP54 protection according to IEC 60529

BergStak HS™ 0.50mm Mezzanine Connector

BergStak HS™ 0.50mm Mezzanine Connector

FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS

BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.

The BergStak HS™ series meets the new 25Gb/s performance requirement.

Available in 50 positions
Available in 12mm stack height
5 and 8mm stack heights, and up to 120 pin configurations available upon request

BergStak+™ 0.80mm Mezzanine Connector

BergStak+™ 0.80mm Mezzanine Connector

BOARD-TO-BOARD SOLUTION FOR HIGH SPEED AND HIGH DENSITY APPLICATIONS

BergStak+™ 0.80mm is designed to be the next generation PCIe 4.0 compliant mezzanine connector system. It is fully compatible with the existing BergStak® 0.80mm product recommended by the Open Compute Project (OCP).

Backward mateable and footprint compatible with existing BergStak® 0.80mm

Available in 80 and 120 positions. Other position

Available in 5, 8, 12 and 16mm stack heights

BergStak® 0.40mm Floating Board-to-Board Connector

BergStak® 0.40mm Floating Board-to-Board Connector

3-AXIS FLOATING FEATURE, SHIELDED DESIGN
BergStak® 0.40mm is a floating type Board-to-Board (BTB) connector with 32 pin count and stack height of 5mm. This solution comes with an all-round shield for superior EMI performance. Its unique connector design has a floating range of ±0.40mm in the X, Y and Z directions. BergStak® 0.40 ideal for automotive applications, especially cameras mounted on vehicles.

Fine pitch design at 0.40mm
Supports speed performance up to 3Gb/s
Floating range of ±0.40mm in the X, Y and Z directions
Shielded design for superior EMI performance
Polarized key for Poke-Yoke mating

Bergstak® 0.50mm Mezzanine Connector

Bergstak® 0.50mm Mezzanine Connector

The BergStak® product range is expanded to include 0.5mm mezzanine connectors.

Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is also offered in 10 to 60 positions in 10 position increments.

Designed with scoop-proof housing, the terminals are protected from damage when parts are mated.

BergStak® 0.5mm mezzanine connector comes with two options: Metal hold-down option ensures higher retention force; Locating pegs option eases manual assembly. Both options can be configured within a single connector.

BergStak® 0.5mm mezzanine connector is a comprehensive and versatile solution. The 0.5mm double row contact pitch feature saves space on PCB and is highly suitable for high density applications in consumer and industrial markets.

Bergstak® 0.80mm Pitch

Bergstak® 0.80mm Pitch

FLEXIBLE SOLUTION FOR HIGH DENSITY APPLICATIONS

Amphenol ICC's BergStak® 0.8mm is a flexible solution designed for high speed and high density, parallel board-to-board connector system with 16 PCB stack heights in 9 sizes up to 200 positions.

Housing and terminal profile guarantees support of up to 12Gb/s

Vertical versus vertical mating configuration

40 to 200 position sizes in 20 position increments

5mm to 20mm stack heights in 1mm increments

Conan® 1.00mm Connector

Conan® 1.00mm Connector

SECURE, HIGH SPEED DESIGN FOR HARSH ENVIRONMENTS Amphenol ICC's Conan® 1.00mm is a mezzanine connector designed for industrial applications and harsh environments. Its unique design with an audible 'click' sound enhances the security and ease of use.

New RA configuration in 4 pin counts
RA has compact size of 8.5mm depth and 5.3mm height on PCB after mating
Enables perpendicular stacking application

Customised value added mechatronics

Customised value added mechatronics

One of our core competences has always been the high experience in manufacturing custom sensors and controls according to customers´ requirements, coping with even the hasher environments´ conditions using rotary, linear and multiturn contact and non-contact technologies.
The pursuit of the most cost-effective total custom-engineered Sensors Solution for your needs is firmly embedded in our business philosophy, whatever your requirements may be, from adapting standard products to complete new designs. Rapid prototyping, low batches accepted, up to 360º measuring range, analog, PWM, SPI, switch outputs are some of the key features offered by Piher. We offer accurate and reliable 360° non-contact angular position sensing.

DCM-PT15 detented potentiometer

DCM-PT15 detented potentiometer

The combination of the well-known PT15/PTC15/PS15 control potentiometers with a Detent Control Mechanism (DCM) affords the appliance designer the possibility to solder the potentiometer onto the Control PCB assembly and then, in a second operation, assemble the DCM over it. This removes the need to build Detents into the User front panel of the appliance, simplifying, and significantly reducing the total cost of the solution.

The detent torque can be modified according to Customer requirements (depending on the input dial’s diameter, etc) as can the number and position of the detents.

Features
High & low torque detents can be freely mixed
Cut track option (initial / final)
Detents configurable to specific positions in complex tapers.
Designed for PT15V or PS15 (SMD)
Wiper positioned at 50% or fully clockwise
Resistive track dust proof enclosed
Up to 16 high torque detents
Also upon request:
Self extinguishable plastic UL 94V-0
Wiper positioned at 50% or fully clockwise
Special Tapers
Crimped terminals

DCM-PTT detented potentiometer

DCM-PTT detented potentiometer

Fully customiseable detented potentiometer that features:

-detents (or no detents)
-end stops
-plastic / metal shafts
-"plug-and-play" connectors
-"push to turn" function
-availability as switch, encoder or potentiometer

Main features:
-Endless Rotation (360º)
-Wide Electrical Angle (340º ± 10º)
-Extended Mechanical Life (25.000 cycles)
-Laser trimming upon request
-Resistance values*: 10k (potentiometer version)
-Standard detents number*: 4, 2
-Detent torque*: 900 to 1500 gf.cm
-Tolerance: ± 30%
-Nominal Power: 0.15 W @ 50ºC
-Linearity (absolute): ± 5% (standard)
-Taper: Linear (potentiometer version)
-Life*: 25,000 cycles
-Temperature Range: -40ºC to +120ºC
-Mechanical Angle: 360º
-Electrical Angle: 280º ± 10º
-Rotational Torque: ≤ 50 mN.m
-Max. Voltage: 38 VDC

(*) Others upon request

E-15, 15mm low profile incremental encoder

E-15, 15mm low profile incremental encoder

The extended temperature range (-40ºC to +120ºC) allows this encoder to be employed in extreme environmental applications where other encoders currently on the market can not be used. This in combination with optional SMD or through-hole mounting makes the E-15 series ideal for automotive heating, ventilation & air conditioning, oven & microwave (white and brown goods in general), kitchen appliance and power tools.

Main features
3 or 6 pulses per revolution (standard).
SMD or Through-hole Mount.
Working Temperature Range (-40ºC to +120ºC).
Low Profile (4.4 mm).
Embossed Tape (SMD) or Bulk packaging (Through hole).
Reflow Soldering capability.
Shaft insertable from both sides.
Polarised "T" rotor (European Home Appliance standard).
All PT/ PTC 15 shafts compatible.
IP54 protection according to IEC 60529.

Evaporator Core Temperature Sensor | Thermometrics

Evaporator Core Temperature Sensor | Thermometrics

Thermometrics Evaporator Core Temperature Sensor measures evaporator core temperature in a vehicle's HVAC system so that it doesn’t freeze over, preventing a costly repair. The ultra fast response time aids in the HVAC system efficiency by enabling the evaporator core to operate closer to 0°C without the risk of a freeze over condition.

Features:

Existing field-proven design
Probe construction protects the thermistor from moisture
Fast response time using geometry and materials optimized for maximum heat transfer
Small size & flexible packaging facilitates installation & service
Snap-fit housing eliminates wiring insulation damage and provides strain relief
Long-term stability – proprietary silver migration controls
Salt fog resistant
Alternate RvT curves available
Different geometries to meet package requirements available
By Amphenol Advanced Sensors | Thermometrics, Inc.

Evaporator Temperature Sensor | Thermometrics

Evaporator Temperature Sensor | Thermometrics

Thermometrics Evaporator Temperature Sensor is used to measure evaporator core temperature. An evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and robust thermistor to measure its temperature to prevent the core from freezing. A frozen core could result in costly damage to the evaporator core and diminished HVAC operation, so that the cabin temperature can no longer be controlled.

Features:

High accuracy and long term stability
Fast response time
Small size & flexible packaging
Snap-fit housing eliminates wiring insulation damage
Easy twist-to-lock design for easy installation and service
Integral connector
The parts passed 2000 hour + submersion test
Pigtail and fin-type versions available
Alternate RvT curves available
Different geometries to meet package requirements
By Amphenol Advanced Sensors | Thermometrics, Inc.

GE-1856 - Intake Air Temperature Sensor (IAT) | Thermometrics

GE-1856 - Intake Air Temperature Sensor (IAT) | Thermometrics

Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

High accuracy and long term stability
Fast response time
Easy installation and service
Integral sealed connector
Alternate RvT curves available
Other resistance and beta values available

Griplet® Miniature IDC Connector

Griplet® Miniature IDC Connector

RELIABLE CONNECTION AND EASE OF INSTALLATION FOR WIRE-TO-BOARD TERMINATIONS
Amphenol ICC's Gripet® Miniature IDC Connector offers a robust solution for miniature IDC Wire-To-Board connections. Each connector comes in 5mm pitch, has a 3.80mm profile and 4mm width. Its low profile and compact design makes Griplet® an ideal connector where space is tight and ease of installation is important.

Four points of wire contact plus strain relief ensures highly reliable connection
Wire applied and insultated directly to a PCB to maximise cost effeciency
Multiple wire sizes from 30 to 20 AWG

Harsh Environment Chip Thermistor - CR-1 | Thermometrics

Harsh Environment Chip Thermistor - CR-1 | Thermometrics

The CR-1 Harsh Environment Chip Thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating.Our NTC chip thermistors are ideal for harsh environment applications and high volume assembly.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

AEC Q200 Rev D Qualified
Suitable for automotive, EGR, SCR, TMAP, OAT, HVAC & white goods applications
Operation up to 190°C with excellent stability
Small body diameter
Fast response
High thermal shock resistance
Automotive/Aerospace fluids resistance
Water immersion
Flexible – coated leads can be formed
Insulation resistance to 1kV d.c.
Designed for accurate temperature measurement, control & compensation
Tight tolerances on resistance and B value
Available on bandolier to IEC 286-2RoHS 2011/65/EC / REACH compliant

High Pressure Sensors - NPI-15 Series | NovaSensor

High Pressure Sensors - NPI-15 Series | NovaSensor

The NovaSensor NPI-15 Series High Pressure Sensors employs SenStable® processing technology, providing excellent output stability. The NovaSensor® NPI Series incorporates state-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. The piezoresistive sensor chip is housed in a fluid filled cylindrical cavity and isolated from measured media by a stainless steel diaphragm and body.

As with all NovaSensor® silicon sensors, the NPI Series employs SenStable® processing technology, providing excellent output stability.

Features:

Solid state, high reliability
High sensitivity, 200 mV typical FSO with 1.0 mA excitation
316 L stainless steel, IsoSensor design
Linearity 0.1% FSO typical
Three standard ranges: 0 psi to 500 psi to 0 psi to 5,000 psi (0 bar to 34 bar to 0 bar to 345 bar) available,sealed gage or absolute
Standard configurations include: —1/2–20 UNF threaded male port with 1.0 in (25.40 mm) flange —0.59 in (15 mm) diameter x 0.87 in (22 mm) long cylinder with o-ring seals
—1/4–18 NPT male port with 7/8 in flange
—1/8–27 NPT male port with 7/8 in flange

Thermal accuracy FSO 0.2% typical
Custom Configurations and Other Pressure Ranges can be accommodated
By Amphenol Advanced Sensors | NovaSensor

High Pressure Sensors - NPI-15VC Series | NovaSensor

High Pressure Sensors - NPI-15VC Series | NovaSensor

The NovaSensor NPI-15VC Series of voltage-compensated, media isolated Pressure Sensors designed to operate in hostile environments while providing outstanding sensitivity, linearity, and hysteresis. The NovaSensor® NPI Series incorporates state-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. The piezoresistive sensor chip is housed in a fluid filled cylindrical cavity and isolated from measured media by a stainless steel diaphragm and body.

As with all NovaSensor® silicon sensors, the NPI Series employs SenStable® processing technology, providing excellent output stability.

Features:

Solid state, high reliability
High sensitivity with 100 mV ± 1% FSO at 10 VDC
316L stainless steel, IsoSensor design
Linearity 0.1% FSO typical
Thermal accuracy 0.2% FSO typical
Four standard ranges: 500, 1000, 3000, and 5000 psi (34.5, 69, 207, and 345 bar) available in absolute or sealed gage
Standard configurations include:
—1/2–20 UNF threaded male port with 1.0 in (24.4 mm) flange
—0.59 in (14.98 mm) diameter x 0.87 in (22.09 mm) long cylinder with o-ring seals
—1/4–18 NPT male port with 7/8 in flange
—1/8–27 NPT male port with 7/8 in flange
Custom configurations and other pressure ranges available. Please consult factory
By Amphenol Advanced Sensors | NovaSensor

Industrial Mini I/O Connector

Industrial Mini I/O Connector

HIGHLY RELIABLE, FIELD INSTALLABLE AND COMPACT I/O SOLUTION

Industrial Mini I/O is a compact wire-to-board interface which is field installable in virtually any environment.
Field installable plug kit
One quarter the size of a conventional RJ45
Highly reliable connection with 2 points of contact per line
Two unique interfaces to prevent mismating
Unique locking feature with high cable retention force within the metal housing, resulting in minimal space required

Inrush Current Limiting Thermistor - CL Series | Thermometrics

Inrush Current Limiting Thermistor - CL Series | Thermometrics

Thermometrics CL Series of Inrush Current Limiting Thermistors consist of a disc thermistor with uninsulated lead-wires, and are used to control inrush current when switching power supplies. The main purpose of limiting inrush current is to prevent components in series with the input to the DC/DC convertor from being damaged. Typically, inrush protection prevents nuisance blowing of fuses or breakers as well as welding of switch contacts.
By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:
Low cost, solid state device for inrush current suppression
Excellent mechanical strength
Wide operating temperature range: -58°F to 347°F (-50°C to 175°C)
Suitable for PCB mounting
Available as a standard with kinked or straight leads and on tape and reel to EIS RS-468A for automatic insertion
Low steady resistance and accompanying power loss
Small size
Low cost solid state sensor

Mezzostak® 0.5mm Mezzanine Connectors

Mezzostak® 0.5mm Mezzanine Connectors

Robust 0.5mm fine pitch mezzanine connector suitable for a wide range of high reliability applications and demanding environments.

Innovative hermaphroditic design provides a precise mating interface with extra housing guidance.

Reduced product mix simplifies customer connector qualification, documentation and maintenance.

Two versions offer a choice between supplemental PCB hold-downs and pegs for short overall length.

Micro SD And SD Card Sockets

Micro SD And SD Card Sockets

SD COMPLIANT FOR UHS-I AND UHS-II INTERFACE
Amphenol is a leader in SD card sockets and has the capability to support customized designs. The push-push eject feature is designed for ease of card extraction. The user-friendly SD card socket is ideal for use in portable devices such as digital cameras and mobile phone, server applications as well as automotive devices.

Compatible with second reflow process
Extremely low camber after reflow process
Shielding for superior EMI/ESD
Can be used for PCB 2 sided SMT
Space-saving design
Superior solderability and SI performance

Minitek MicroSpace™ 1.27mm Crimp-To-Wire Connector

Minitek MicroSpace™ 1.27mm Crimp-To-Wire Connector

COMPACT, ROBUST VERSATILE CONNECTOR SYSTEM

Minitek MicroSpace™ 1.27/1.5mm Crimp-to-Wire compact design addresses the growing demand for miniaturizing components. The connector is capable of reducing PCB footprint by 50% due to the increase in connector density.

LV214 Severity-2 compatible ensures high vibration

Endurance, primary and secondary contact retention

65N connector locking strength

Poka Yoke Polarization to prevent visual mismatching

Minitek MicroSpace™ 1.50mm Crimp-To-Wire Connector

Minitek MicroSpace™ 1.50mm Crimp-To-Wire Connector

COMPACT, ROBUST VERSATILE CONNECTOR SYSTEM

Minitek MicroSpace™ 1.27/1.5mm Crimp-to-Wire compact design addresses the growing demand for miniaturizing components. The connector is capable of reducing PCB footprint by 50% due to the increase in connector density.

LV214 Severity-2 compatible ensures high vibration

Endurance, primary and secondary contact retention

65N connector locking strength

Poka Yoke Polarization to prevent visual mismatching

Minitek® 2.00mm - Wire-to-Board

Minitek® 2.00mm - Wire-to-Board

Minitek® is Amphenol ICC's brand for board to board and wire/cable to board connectors in 2.00mm pitch. It is a fully modular system enabling all types of connections between PCBs, wires and flat cables. Its 2mm spacing allows up to 38% space saving compared to traditional modular systems

Vertical and horizontal configurations

Single and double row

2 to 25 positions per row

Eject latch and active latch feature

Modular system ensures all is intermatable

Dual beam contact design ensures reliable connection

Minitek® Pwr 3.0 High Current Connector

Minitek® Pwr 3.0 High Current Connector

ROBUST, VERSATILE AND HIGH CURRENT PERFORMANCE

Minitek® Pwr 3.0 High Current Connector (HCC) is designed for power applications with current rating up to 12A per contact and wire gauge range from 20 to 16AWG for Wire-to-Wire and Wire-to-Board applications. It is available in 2 to 24 circuits for dual row.

Rated current up to 12A per contact

Fully isolated terminals

High retention force in housing

Fully polarized housing

Minitek® Pwr 4.2 High Current Connector

Minitek® Pwr 4.2 High Current Connector

ROBUST, VERSATILE AND HIGH CURRENT PERFORMANCE

Minitek® Pwr 4.2 High Current Connector (HCC) is designed for power applications with current rating up to 13.5A per contact and wire gauge range from 20 to 16AWG for Wire-to-Wire and Wire-to-Board applications. It is available in 2 to 24 circuits for dual row and 3 to 5 circuits for single row.

Rated current up to 13.5A per contact

Fully isolated terminals

Positive locking on housing with low thumb latch operation

Patented right angle receptacle housing.

Minitek® Pwr Hybrid 3.0

Minitek® Pwr Hybrid 3.0

Minitek® Pwr Hybrid 3.0 connectors are designed for power and signal application with current rating up to 5A per circuit, available for dual row and 2 to 24 power circuits, and 2 to 12 signal for Wire-to-Board application.

Crimp, snap-in receptacle contacts are used to terminate AWG 20-30 wires. Receptacle housings allow Wire-to-Board configurations. Crimping and removal tools are available for wire harness assembly. Board mounted vertical header supports Wire-to-Board interconnections. Wave soldering headers are available in through-hole configuration.

Minitek® Pwr Hybrid 4.2

Minitek® Pwr Hybrid 4.2

Minitek® Pwr Hybrid 4.2 connectors are designed for power and signal application with current rating up to 9A per circuit, available for dual row and 2 to 24 power circuits, and 2 to 12 signal for Wire-to-Board application.

Crimp, snap-in receptacle contacts are used to terminate AWG 16-30 wires. Receptacle housings allow Wire to-Board configurations. Crimping and removal tools are available for wire harness assembly. Board mounted vertical headers support Wire-to-Board interconnections. Wave soldering headers are available in through-hole configuration.

Minitek127® 1.27mm

Minitek127® 1.27mm

Minitek127® is an extensive modular range of connectors for all types of wire to board and cable to board applications. It includes straight and right angle, surface mount and through mount, pin headers and board receptacles in different plating variations and position numbers up to 100. The product line also include IDC version.

N6 6mm carbon potentiometer

N6 6mm carbon potentiometer

6mm low cost carbon potentiometer. For long life and lead free reflow soldering please use the product N6R.

Standard features:
RoHS compliant materials.
Carbon resistive element.
Plastic substrate.
Over-moulding manufacturing technique.
SMD or through hole.
Embossed Tape (for SMD), tape on reel, ammopack and magazine packaging for automatic insertion and bulk for manual assembly.
Both sides cross slot easy adjustment.
Accidental rotor movement protected.
Traceability insured through date code marking.
Assembly method: stand up and lay down.

NTC Temperature Standards - Type CSP | Thermometrics

NTC Temperature Standards - Type CSP | Thermometrics

The Thermometrics Type CSP Temperature Standards are ultrastable probe thermistors which have been calibrated to an accuracy of 0.01°C. The standard unit has a thin, conformal coating of silicone rubber over the entire unit; this makes it suitable for immersion in a water bath. They are also available with stainless steel sensor housings, or they can be encapsulated into various sheaths.

Features:

Ultrastable
Calibrated to 0.01°C accuracy
Suitable for liquid immersion
Various calibration temperature ranges, lead lengths and coatings available


By Amphenol Advanced Sensors | Thermometrics, Inc.

NTC Thermistors - Radial Lead | Thermometrics

NTC Thermistors - Radial Lead | Thermometrics

Thermometrics offers point-matched Radial Lead Disc Thermistors with bare lead wires in a wide range of material systems.

NTC Thermistors- Radial lead / Applications / Description
Thermometrics -Uncoated Disc Radial Leads NTC Thermistor Type RL10 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL14 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL20 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL30 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL35/40/45 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type SA / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Interchangeable thermistor with bare lead-wires.
By Amphenol Advanced Sensors | Thermometrics, Inc.

Oil Pressure Switch | Thermometrics

Oil Pressure Switch | Thermometrics

The Thermometrics Oil Pressure Switch can be used in all vehicles monitors the engine oil flow when the engine starts. It can detect oil pressure and enables the EMS ECU to check for the lack of oil. It can also send an alarm signal to the driver, helping to avoid engine damage due to overheating

Features:
Easy to install
High sensitivity
Wide applications

By Amphenol Advanced Sensors | Thermometrics, Inc.

Oil Temperature Sensor (OTS) | Thermometrics

Oil Temperature Sensor (OTS) | Thermometrics

Thermometrics Oil Temperature Sensor (OTS) monitors the temperature of the engine oil in a vehicle and displays this measurement to the vehicle’s occupants. If a vehicle operates at too high a temperature, the engine can be in danger of damage. The OTS prevents this by allowing the operator to stop the vehicle and switch off the engine if the temperature of the oil gets too high as a result of an over heated engine.

Features:

High accuracy and long term stability
Fast response time
Integral sealed connector
Small size
Field-proven design
Pigtail versions also available
Alternate RvT curves available
Different geometries to meet package requirements
Other resistance and beta values available
By Amphenol Advanced Sensors | Thermometrics, Inc.

PC-16, 16mm panel potentiometer

PC-16, 16mm panel potentiometer

16mm potentiometers enclosed in plastic housing with a shaft and IP54 ingress protection rating.

Main features
Modular gang type (up to 4).
Self extinguishable material UL 94-V0.
Bushless model.
Nut & washer.
Switch.
Stereo matching.
Metalic support.
IP54 protection according to IEC 60529.
Polyester substrate.
Carbon resistive element.

These provide full customisation capabilities, such as:

Electrical and mechanical specifications.
Custom mechanical life.
Special outputs (linear, log, anti-log, bespoke).
Absolute or independent linearity values.
Special resistance value and tolerance.
Mechanical and electrical angles.
Switch.
Selectable busing and shafts lenghts and shapes.

Potentiometers with detents

Potentiometers with detents

This product family has been specifically developed to allow the integration of otherwise large and expensive external mechanisms into the body of the majority of the 6, 10 & 15 mm potentiometer series thus allowing a high range of configurations: special tapers, tolerances, linearity, cut track, etc.

This detent design not only adds a "click" sensation of position, but also offers enormous savings in both cost and space for any given application.

Strong and weak detents can be mixed as per cutomer´s request.

- Replacement for:
• Existing customer detent mechanisms.
• Multi-pole switches.
• 3 or 4-bit absolute encoders (connecting to microprocessor analogue input).
- Analogue signal presets.
- Temperature control settings.
- Relay Timers.

PT´s with detents also lend themselves perfectly to industrial and domestic power tool applications where the detents prevent accidental movement of the potentiometer under vibration.

If high torque detents are required please see our Detent Control Mechanism (DCM) series datasheets.
As previously highlighted, this family is indispensable wherever both cost and space saving reductions are important, or where a series of fixed positions along the potentiometer travel are required.

Precision, Ultrastable NTC Temperature Standards - Types S/AS/ES | Thermometrics

Precision, Ultrastable NTC Temperature Standards - Types S/AS/ES | Thermometrics

The Thermometrics Temperature Standards consist of ultra-stable thermistor probes assembled into thin wall stainless steel housings with shielded extension leads.

The thermistors used receive special processing to ensure long term stability. All thermistor temperature standards are ruggedly constructed and are suitable for liquid immersion.



Features

Long term stability
Rugged construction
Suitable for liquid immersion
Typically not affected by shock and vibration
NIST certified calibration


By Amphenol Advanced Sensors | Thermometrics, Inc.

Pressure Sensor Die - P1602 | NovaSensor

Pressure Sensor Die - P1602 | NovaSensor

The NovaSensor P1602 Pressure Sensor Die is a piezoresistive pressure sensor offered in a miniature die. When excited with 1 mA constant current, the P1602 produces a millivolt output that is proportional to input pressure. The P1602 is available as an absolute pressure sensor, where the applied pressure is referenced to an internal vauum sealed within the die. With NovaSensor SenStable®, the P1602 will provide very low long-term stability erros and excellent repeatability.

Features:
Solid state, high reliability
Low-cost, miniature size
Standard pressure ranges: 0 to 15, 0 to 30, 0 to 50, 0 to 100 psia (1, 2.1, 3.4 and 6.9 bar)
Nonlinearity < 0.2 %FSO
SenStable®, silicon fusion bonded sensor die

By Amphenol Advanced Sensors | NovaSensor

Printed Circuit Board (PCB) - RF / High Speed

Printed Circuit Board (PCB) - RF / High Speed

A PCB consisting of one or more conductive layers used in High-Frequency Antenna and Radar marketplaces.
*Faster transmission of signals and a significant reduction in signal loss.
*High performance materials for high speed digital applications. PTFE, LCP and other advanced laminates and advanced composite laminates.
*Hybrid constructions are available to help lower material costs.

PS10 & PSX-10, 10mm SMD potentiometer

PS10 & PSX-10, 10mm SMD potentiometer

The PS-10 & PSX-10 potentiometers arespecifically designed for leadfree reflow soldering processes (excellent performance).

Main features:

Self extinguishable plastic UL 94V-0 (PS-10).
Carbon resistive element.
Wiper positioned at initial, 50% or fully clockwise.
Specifically designed for leadfree reflow soldering
processes (excellent performance).
Full traceability.
Moisture sensitivity level 1 (PS-10).
Embossed tape according to IEC 60286-3:2007
IP54 protection according to IEC 60529.
Long life model for low cost control potentiometer applications.
Wiper positioned at 50% or fully clockwise.
Mechanical detents.
Low torque versions.

PS-15 & PSX-15 15mm SMD potentiometer / sensor

PS-15 & PSX-15 15mm SMD potentiometer / sensor

This sensor offers a new surface mountable solution for detecting changes in angle and position and converting them into a highly reliable voltage output. The sensor can be processed by standard automated placement equipment and reflow (or lead-free reflow) soldered. For applications where rotor angle is critical, locating pins are available.

The PS15 Series is available with seven different rotor designs and 15 shaft styles. This offering allows Piher to configure a custom sensing solution for virtually any control or position feedback requirement. The result is a customized sensor that maximizes board density, reduces weight and eases assembly while achieving the engineer’s critical sensor design goals for the application.

A wide range of options, including up to 38 detents, allows further customization. Detents not only add a crisp "click" sensation for each position without affecting the original sensor specification or performance, but also offer significant savings in both cost and space; and are particularly advantageous in industrial and domestic power tool applications to prevent accidental movement.

PS-6 & PSX-6 6mm SMD potentiometer

PS-6 & PSX-6 6mm SMD potentiometer

The PS-6 & PSX-6 potentiometers were specifically designed for leadfree reflow soldering processes (excellent performance).

Standard features:

Self extinguishable plastic UL 94V-0 (PS-6).
Carbon resistive element.
Wiper positioned at initial, 50% or fully clockwise.
IP54 protection according to IEC 60529.
Also upon request:
Mechanical detents.
Long life model for low cost control potentiometer applications.

PT series, rotary switches-potentiometers

PT series, rotary switches-potentiometers

For more than 20 years PIHER has been manufacturing rotary switches for all types of applications. Cost-effective and highly customiseable products with our huge experience in adapting them to customers´ needs when necessary. We have the best solution for all your rotary switching needs. Our products are widely used in Automotive, Consumer and Multimedia applications due to their excellent performace and quality/price ratio.

ISO TS1649, ISO14001, ISO 9001, Lead-Free compliance and hundreds of satisfied customers are the best presentation card. Here we are presenting to you our Rotary Switches based on our PT series. We strongly recommend you to visit www.piher.net for our PC16, S15 and T-21 rotary switches and our full product range that includes Potentiometers, Encoders and Position
Sensors.

PT-10, 10mm carbon potentiometer / sensor

PT-10, 10mm carbon potentiometer / sensor

10mm carbon potentiometer

Main features:
*Plastic material according to UL94V-0 upon request
*Dust proof enclosure
*Supplied in magazines for automatic insertion
*Wiper positioned at initial, 50% or fully clockwise
*Low & extra low torque versions
*Mechanical detents
*Special tapers
*Special switch option upon request
*Cut track option upon request
*Crimped terminals available

PT-15, 15mm potentiometer / sensor

PT-15, 15mm potentiometer / sensor

Our PT-15 series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs"

Main features:
*Plastic material according to UL94V-0
*Dust proof enclosure
*Life up to 200k cycles (click here for longer life potentiometer models: up to 5 million cycles)
*Supplied in magazines for automatic insertion
*Wiper positioned at 50% or fully clockwise
*Low torque versions
*Mechanical detents (up to 27)
*Special tapers
*Special switch option
*Cut track option
*Crimped terminals available
*Special linearity

PT-6, 6 mm carbon potentiometer

PT-6, 6 mm carbon potentiometer

6 mm through-hole carbon potentiometer with a high level of customisation possibilities, such as:
*Electrical and mechanical specifications.
*Custom mechanical life.
*Mechanical design.
*Detents.
*Special outputs (linear, log, anti-log, bespoke).
*Absolute or independent linearity values.
*Special resistance value and tolerance.
*Mechanical and electrical angles.
*Switches.
*Custom shafts and knobs.

Main features:
*Carbon resistive element.
*IP54 protection according to IEC 60529.
*Polyester substrate.
*SMD versions available (see the N6 product family).
*Wiper positioned at initial, 50% or fully clockwise.
*Supplied in magazines for automatic insertion.
*Long life model (10K cycles), others upon request.
*Housing available in self extinguishable plastic (UL94V0).
*Mechanical detents (stops).

PTC Type Thermistors - PTF Series | Thermometrics

PTC Type Thermistors - PTF Series | Thermometrics

The Thermometrics PTF Series of PTC Type Thermistors consists of a range of radially-wired bare PTC disc thermistors. They are designed for general purpose over-current and short circuit protection.



Features

Low cost solid state fuse
Available in a broad range of resistances, transition temperatures and voltage ratings
Exhibits large positive increases in resistance with temperature
Resistance/temperature characteristic is infinitely repeatable and has no hysteresis associated with its action
Proven quality and reliability over many years of manufacturing


By Amphenol Advanced Sensors | Thermometrics, Inc.

PTC Type Thermistors - PTO Series | Thermometrics

PTC Type Thermistors - PTO Series | Thermometrics

The Thermometrics PTO Series of PTC Type Thermistors consists of a range of radially-wire bare PTC disc thermistors for current regulation, circuit protection and temperature measurement and control. Available in a broad range of resistances, transition temperatures and voltage ratings.



Features

Low cost solid state sensor
Available in a broad range of resistances, transition temperatures and voltage ratings
Exhibits large positive increases in resistance with temperature
Resistance/temperature characteristic is infinitely repeatable and has no hysteresis associated with its action
Proven quality and reliability over many years of manufacturing


By Amphenol Advanced Sensors | Thermometrics, Inc.

PTC Type Thermistors - YM Series | Thermometrics

PTC Type Thermistors - YM Series | Thermometrics

The Thermometrics YM Series of PTC Type Thermistors consists of a range of radially wired PTC disc thermistors with silicone resin coating with a wide range of operating current levels. Designed for general purpose over-current, overvoltage and direct over-temperature protection.



Features

Fast switching times
Operation up to 265V rms
Wide range of operating current levels
Excellent stability
Fail-safe operation
Solid state
High performance barium titanate ceramic
Suitable for automatic PCB insertion


By Amphenol Advanced Sensors | Thermometrics, Inc.

PTC-10, 10mm cermet potentiometer / sensor

PTC-10, 10mm cermet potentiometer / sensor

Our PT series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs"

Main features:
*Cermet resistive element.
*Dust proof enclosure.
*Alumina substrate.

Also upon request:
*Low & extra low torque versions
*Available as SPDT switch
*Laser trimming for tighter tolerances
*Wiper positioned at 50% or fully clockwise.
*Supplied in magazines for automatic insertion.
*Plastic material according to UL94V-0
*Special tapers
*Mechanical detents

PTC-15, 15mm cermet potentiometer

PTC-15, 15mm cermet potentiometer

15mm cermet potentiometer.
Our PT series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs".

Main features:
*Plastic material according to UL94V-0
*Dust proof enclosure
*Long life model
*Supplied in magazines for automatic insertion
*Wiper positioned at initial, 50% or fully clockwise
*Low torque versions
*Mechanical detents (up to 27)
*Special tapers
*Special SPDT switch option
*Cut track option upon request
*Laser trimming for tighter tolerances
*Crimped terminals available
*Special linearity upon request

PV Crimp

PV Crimp

The innovative PV® crimp-to-wire system connects discrete wire to printed circuit boards. High reliability dual-metal receptacle terminals plug to industry standard 0.025 inch (0.635mm) square posts. A variety of containment, protection and guidance options are available for both sides of the connector interface.

Wire side- PV® receptacle terminals can be terminated to wire and used discretely or inserted to multiple-circuit, MINI-LATCH connector housings that include optional polarizing keys.

Printed Circuit side- Shrouded multiple-post, headers include an integral friction feature that grips the sides of the mating MINI-LATCH housings and reduces the risk of disengagement. Other Amphenol ICC header options include discrete staked pins or BergStik® un-shrouded headers.

Quickie® IDC

Quickie® IDC

PRECISE AND DURABLE IDC CONNECTION WITH DUPLEX PLATING AND DUAL POLARIZATION
Amphenol ICC's Quickie® is a complete solution for flat cable-to-board connections using 2.54mm pitch IDC technology. The highly durable and cost-saving connectors come with specialized features in polarization, plating, and structure. Headers are low profile and come in shrouded versions with or without eject latches. Receptacles have strain relief covers for precise alignment.

Dual polarization feature prevents connector mismatch
Duplex plating saves cost and guarantees 100+ mating cycle performance
IDC headers have four walled shielding for pin protection and misalignment prevention
Pre-loaded adjustable bridge-type cover on receptacles shortens assembly time and protects contacts
Pin-in-paste versions and direct IDC-to-board one-piece solutions are available

Rib-Cage® Board-To-Board

Rib-Cage® Board-To-Board

Rib-Cage® connectors provide optimal precision and reliability at a competitive commercial cost.

Rib-Cage® connectors meet high performance standards for use in applications with shock and vibration.

The versatile Rib-Cage® system includes dual-row, pinand-socket connectors for right-angle and mezzanine connections between printed circuit boards (PCB) or flexible printed circuits (FPC).

Rotaconnect® Wire-To-Board Connector

Rotaconnect® Wire-To-Board Connector

Amphenol ICC extends the RotaConnect® range with a Wire-to-Board (WTB) solution. The WTB connector mates horizontally with the existing RotaConnect® Board-to-Board (BTB) version, which is hermaphroditic and surface mount soldered to the PCB.

The RotaConnect® WTB is a 3.00mm pitch connector. It features a dual beam spring contact design, delivering high-performance and reliability. The connector features a passive latch for housing retention which protects pins and prevents mismatching. Housings are available in 2 and 4 positions.

RotaConnect® WTB provides power to the LED printed circuit board in a string of rigid printed circuit board light strips. The contacts accept stranded copper wire with wire ranges from 30AWG to 22 AWG and the maximum current rated is up to 5A. The operating voltage is 125 VAC and temperature range of -40°C up to +125°C.

RotaConnect® WTB is RoHS compliant and is ideal for applications in the industrial market.

Rugged D-Sub

Rugged D-Sub

RUGGED D-SUB PANEL MOUNT CONNECTOR IP67 SEALING
Ruggedized D-sub connectors with die cast housings and IP67 sealing for Harsh Environment applications, provide reliable performance in extreme conditions for the most demanding applications, and mate with standard connectors.

IP67 sealing protects against water, dust
Die cast metal housings protect against mechanical damage
Standard Density 9 pins to High Density 15 & 26 pins replace standard equivalents
Operating temperature range from -44°C to +105°C for extreme conditions
RoHS for environmental compliance

Rugged USB

Rugged USB

RUGGED USB CONNECTOR FOR HARSH ENVIRONMENT APPLICATION, GENERATION 2
Amphenol's MUSBR series USB Connectors is a line of Generation 2 ruggedized USB connectors with die cast housings and IP67 sealing, designed for Harsh Environment applications. Rugged series provide reliable performance in extreme conditions for the most demanding applications, and mate with standard USB plugs.

Rugged USB Connector Series serve many markets and applications across the globe including Automotive, Communications, Consumer, Data, Industrial and Medical.

MUSBR series is offered in Type A, Mini B, Mini AB and Type C connector interface
IP67 sealing protects against water and dust
Die cast metal housings protect against mechanical damage
Compact design saves panel space
Operating temperature range from -55°C to +105°C for extreme conditions
RoHS compliant to meet environmental standards

S-15 rotary switch

S-15 rotary switch

The N-15 potentiometer/sensor series has been expanded to incorporate both encoders and rotary switches in the same package configuration allowing the user to design in any one of the three options whilst keeping the same board layout and user interface.


The S-15 switch series has been specifically designed to offer a flexible and customiseable rotary switch/sensor solution for the automotive industry typically employed as multi-position interior/exterior lighting, Traction or Airbag enable/disable controls. The technology developed for the aforementioned S-15 solutions is also available for all types of custom switches however demanding your application may be.

Standard features:
2 and 6 positions versions (standard)
SMD or Through-hole Mount
Low Profile (4.4 mm)
Embossed Tape (SMD) or Bulk packaging (Through hole)
Reflow Soldering capability
Shaft insertable from both sides
Polarised "T" rotor (European Home Appliance standard)
All PT/ PTC 15 shafts compatible
IP54 protection according to IEC 60529

SM-15 / SMC15, 15mm potentiometers

SM-15 / SMC15, 15mm potentiometers

15mm potentiometers enclosed in plastic housing with a shaft and with IP54 ingress protection rating.

These provide full customisation capabilities, such as:

Electrical and mechanical specifications.
Custom mechanical life.
Detents.
Special outputs (linear, log, anti-log, bespoke).
Absolute or independent linearity values.
Special resistance value and tolerance.
Mechanical and electrical angles.
Switches.
Custom shafts lenghts.
Cermet version available for higher working temperatures.
10mm version available (see SM/SMC-10 series).
16mm panel mount version available (see PC-16 series).

ST-15 Endless rotation 15mm potentiometer/sensor

ST-15 Endless rotation 15mm potentiometer/sensor

The Model ST-15 offers engineers an endless rotation version of the popular PT-15 rotary potentiometer. This new 360º version adds endless clockwise (CW or CCW) rotation as a part of the current features of the PT-15s already highly configurable mechanical and electrical specifications. That means a wide variety of off-the-shelf mounting methods, custom ohmic (resistance) values, tight linearity performance, along with the 7 different rotor designs and 15 standard shaft styles.

This potentiometer offers product designers the flexibility of allowing users full rotational access across the normal stops that have, up to now, limited mechanical rotation. With this design feature, engineers can now design product command features over a 340º range (active electrical travel). For maximum design versatility, the endless rotation feature can be combined upon request with detents to provide users tactile feedback on each setting and selection – with up to 51 unique detent positions. Virtually any appliance rotary feedback requirement can be configured using the PT-15s wide range of standard features. Other interesting optional features include flame-retardant plastics (meets UL Standard 94 V0), detents, rotors and shafts, long cycle life, SMT mounting and custom electrical angles.

Stainless Steel Media Isolated Sensors - NPI-12 Series | Nova Sensor

Stainless Steel Media Isolated Sensors - NPI-12 Series | Nova Sensor

The NovaSensor NPI-12 Series of Stainless Steel Media Isolated Sensors provide a cost effective solution for applications that detect tube blockages and pump performance. The NPI-12 Series is intended to mount adjacent to flexible tubing to sense tube expansion. Cleanliness is assured with the NPI-12 Series stainless steel finish.

The NPI-12 Series incorporates state-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. They are designed to operate in hostile environments while providing outstanding sensitivity, linearity and hysteresis. The piezoresistive sensor chip is housed in a fluid filled cavity and isolated from the measured media by a stainless steel diaphragm and body. As with many NovaSensor® silicon sensors, the NPI-12 Series employs SenStable® processing technology, which provides excellent output stability.

Features:

Low-cost media isolation
0.20 mV/V/psi sensitivity
±0.1% accuracy
Operating temperature 50°F to 104°F (10°C to 40°C)
5 VDC excitation
Four-pin connector
Solid state reliability
Infusion pump line blockage sensor
By Amphenol Advanced Sensors | NovaSensor

Surface Mount Pressure Sensors - NPP-301 Series | NovaSensor

Surface Mount Pressure Sensors - NPP-301 Series | NovaSensor

The NovaSensor NPP-301 Series features silicon pressure sensors in surface mount packages. An ultra-small Silicon Fusion Bonded (SFB), ultra-high stability SenStable® piezoresistive chip from NovaSensor is placed in a plastic package that exploits high volume, leadframe package technology to bring forth a low-cost sensor alternative to the OEM user.

The NPP-301 Series produces a voltage output that is linearly proportional to the input pressure. The user can provide NPP Series products with signal conditioning circuitry to amplify the output signal or to maximize OEM value added. The NPP-301 Series is compatible with most non-corrosive gases and dry air.
By Amphenol Advanced Sensors | NovaSensor

Features:
*Low-cost surface mount package: SO-8
*Wide operating temperature range: -40°F to 257°F (–40°C to 125°C)
*Static accuracy <0.20% FSO maximum
*Suitable for automated component assembly
*Four element Wheatstone bridge configuration for circuit design flexibility
*Solid-state reliability
100, 200 and 700 kPa absolute pressure ranges available

T16, 16mm rotary potentiometer

T16, 16mm rotary potentiometer

16mm carbon potentiometers with excellent rotational torque and high mechanical endurance.

These provide full customisation capabilities, such as:

Electrical and mechanical specifications.
Custom mechanical life.
Plastic or metal shaft.
Detents.
Special outputs (linear, log, anti-log, bespoke).
Absolute or independent linearity values.
Special resistance value and tolerance.
Mechanical and electrical angles..
Custom shafts lenghts.
Cermet version available for higher working temperatures.

T21, 21mm rotary potentiometer

T21, 21mm rotary potentiometer

21mm carbon potentiometers with excellent rotational torque and high mechanical endurance.

The T21 allows plenty of customisation capabilities, such as:

Electrical and mechanical specifications.
Stereo versions.
Custom mechanical life.
Plastic or metal shaft.
Detents.
Switch versions (rotary, push-push, push-pull).
Special outputs (linear, log, anti-log, bespoke).
Absolute or independent linearity values.
Special resistance value and tolerance.
Mechanical and electrical angles.
Custom shafts lenghts.
Cermet version available for higher working temperatures.

Thermometrics NTC Thermistors | Surface Mount Devices (SMD)

Thermometrics NTC Thermistors | Surface Mount Devices (SMD)

Thermometrics NTC Type Surface Mount Devices (SMD) are intended for temperature measurement, control and compensation. They are suitable for standard soldering techniques and availabe in a range of sizes, including 0402, 0603, 0805 and 1206.

By Amphenol Advanced Sensors | Thermometrics, Inc.

Features:

Nickel barrier tin-plated terminations for soldering
High sensitivity to changes in temperature
Wide operating temperature range -40°C to 125°C
Rugged construction
Excellent solderability without “tombstoning”
Glass-coated ceramic between electrodes for improved stability
Supplied in tape-and-reel packaging
Available in other material systems

Thermopile Infrared (IR) Sensor - ZTP-015 | Thermometrics

Thermopile Infrared (IR) Sensor - ZTP-015 | Thermometrics

Thermometrics ZTP-015 Thermopile Infrared (IR) Sensor is used for non-contact surface temperature measuring. The ZTP-015 Model consists of thermo-elements, flat infrared filter and a thermistor for temperature compensation, all in a hermetically-sealed TO-46 (18) package. There are also a variety of filters available to help maximize performance in specific applications.

Features:

Ultra small-size sensor (TO-41 package)
Included ambient temperature (thermistor) sensor for compensation
High sensitivity
Fast response time
By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermopile Infrared (IR) Sensor - ZTP-315 | Thermometrics

Thermopile Infrared (IR) Sensor - ZTP-315 | Thermometrics

Thermometrics ZTP-315 is a Thermopile Infrared (IR) Sensor that is used for non-contact surface temperature measuring. The ZTP-315 Model consists of thermo-elements, flat infrared filter and a thermistor for temperature compensation, all in a hermetically-sealed TO-46 (18) package. There are also a variety of filters available to help maximize performance in specific applications.



Features

Non-contact measurement
Wider surface area measurement
Small-size sensor package
Included ambient temperature (thermistor) sensor for compensation
High sensitivity
Fast response time
Low cost
By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermopile Infrared (IR) Sensor Module - ZTP-188MA | Thermometrics

Thermopile Infrared (IR) Sensor Module - ZTP-188MA | Thermometrics

Thermometrics ZTP-188MA Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring and presents temperature-compensated 8 linear array outputs via I2C with optics (silicon lens). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-188MA uses 4-wire connections: two signals for I2C output, single power supply and ground. The sensor is fully-calibrated with a wide object and ambient temperature range. Lens for different fields of view are available on request.

Features

Digital temperature output
I2C communication protocol
Fully calibrated and compensated
1 x 8 array module
Compact size and large detection range
Low power consumption
Multi-zone detection

By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermopile Infrared (IR) Sensor Module - ZTP-188ML | Thermometrics

Thermopile Infrared (IR) Sensor Module - ZTP-188ML | Thermometrics

Thermometrics ZTP-188ML Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring and presents temperature-compensated 8 linear array outputs via I2C with optics (silicon lens). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-188ML uses 4-wire connections: two signals for I2C output, single power supply and ground. The sensor is fully-calibrated with a wide object and ambient temperature range. Lens for different fields of view are available on request.



Features

1 x 8 array module
Digital temperature output
Fully calibrated and compensated
UART output
Compact size and large detection range
By Amphenol Advanced Sensors | Thermometrics, Inc.

Thermopile Infrared (IR) Sensor Module - ZTP-315MIH | Thermometrics

Thermopile Infrared (IR) Sensor Module - ZTP-315MIH | Thermometrics

Thermometrics ZTP-315MIH Thermopile Infrared (IR) Sensor Module is used for non-contact surface temperature monitoring. It presents temperature-compensated single outputs via voltage output with optics (glass lens for high temperature detection). It can also provide compatibility with the customer’s device without the need for recalibration. The ZTP-315MIHuses 3-wire connections for output signal, single power supply and ground. The field of view is approx ±9 degrees for 50% normalized output with a total size is only 33 mm X 17 mm.

Features:

High temperature measurement
Single module
Ambient temperature (thermistor) sensor included for compensation
Fully calibrated and compensated
Analog output
By Amphenol Advanced Sensors | Thermometrics, Inc.

Tire Pressure Sensor - NPX1 | NovaSensor

Tire Pressure Sensor - NPX1 | NovaSensor

The NovaSensor NPX1 Tire Pressure Sensor represents the next-generation Remote Tire Pressure Monitoring (RTPM). NPX1 integrates a silicon pressure sensor, 8-bit RISC processor and a LF-input stage to meet market demands for flexible, customer specific behavior/solutions and overall system cost reduction. The programmable version of this sensor is available for development purposes, allowing the customer to download the application code in an electrically programmable EEPROM version.

This tire pressure sensor is intended for developing the application specific program. In order to ensure high reliability, the NPX1 sensor has the measurement routines (pressure, temperature, and supply voltage) implemented in ROM.
By Amphenol Advanced Sensors | NovaSensor

Features:
*12 bit ADC
*4k byte flash (E-ROM)
*2k ROM for user application
*128 byte RAM
*128 byte EEPROM
*Battery management—minimizing power consumption
*Measure and compensate pressure, temperature, and battery voltage
*Media compatibility with tire pressure media
*450, 700, and 1400 kPa absolute pressure ranges
*On chip temperature sensor
*On chip temperature shut down
*Custom ranges available

Transmission Fluid Temperature Sensor (TFT) | Thermometrics

Transmission Fluid Temperature Sensor (TFT) | Thermometrics

Thermometrics Transmission Fluid Temperature Sensor (TFT) measures the temperature of transmission fluid. It provides input to the control module to modify shift patterns for smoother shifting in automatic transmissions, and also provides over-temperature protection by locking the torque convertor.

Features:

Integral connector
Twist and lock design for easy installation
Anti-rotation lock feature
Existing field-proven design
Alternate RvT curves available
Different geometries to meet package requirements
By Amphenol Advanced Sensors | Thermometrics, Inc.

USB Type C Connector System

USB Type C Connector System

SCALABLE, SUPERSPEED CONNECTOR SYSTEM
USB Type C connectors are expected to be widely used as a next-generation interface. They support a variety of protocols such as USB2.0/3.0/3.1 and meet Superspeed communication 10Gb/s, 5A and 20V power supply.

The usability for USB 3.1 Type C connector is enhanced also by its low profile and reversible product design. It is ideal for emerging product designs.

Reversible plug and cable orientation
Meets USB 3.1/3.0/2.0 speed performance
Supports high speed transmission up to 10Gb/s
Extended 5A current rating for USB Power delivery
Vertical, right angle and straddle mount configurations and waterproof type available

Z-15, 15mm position sensor

Z-15, 15mm position sensor

Targeted for Powertrain and other Critical applications, the Z-15 has been specifically designed to be integrated within the existing final application (throttle body, air-intake valve…) to avoid the duplication of costs associated with the standard “bolt-on” alternatives that prevail in the marketplace.

Moreover, because of the cost effectiveness of the Z-15 solution, TRUE redundancy can be achieved employing two or more ganged Z-15’s.

Main features:
Long Life (2M cycles)
Conceived and designed for customisation
SMD or Through-hole Mount
Endless Rotation (360º)
Functional Electrical Angle: 90º
Working Temperature Range (-40ºC to +120ºC)
Low Profile (4.4 mm)
Linearity ± 3% (standard)
Embossed Tape or Bulk packaging
Shaft insertable from both sides
Polarised "T" rotor (European Home Appliance standard)
All PT/ PTC 15 shafts compatible
IP54 protection according to IEC 60529