CONEC IP67 D-SUB SERIES

CONEC IP67 D-SUB SERIES

06.05.2020
...perfect for use in harsh environments!

IP67 D-SUB Series

For industrial use in harsh environments, connector systems are needed that meet special requirements.

The CONEC range includes a wide variety of IP67 D-SUB connectors and corresponding protective hoods. In addition to the IP67 product series D-SUB, D-SUB High Density, Combination D-SUB, Combination D-SUB High Density and Filter D-SUB in standard design, CONEC offers the series

Solid Body and CONEC SlimCon. The advantage of the Solid-Body and CONEC SlimCon connector series is their one-piece zinc die-cast housing with nickel-plated surface, which guarantees optimum protection for the system.

The CONEC SlimCon series stands out not only due to its very small dimensions, but it also includes D-SUB filter connectors with an integrated low-pass filter for conducted interference protection. Thus, the interfaces to the interior of the device are not only perfectly protected against moisture, but can also contribute to meet EMC requirements.

 

The above connectors [Solid Body and CONEC SlimCon] are designed for rear panel mounting and come with a 4-40 UNC internal thread. Corresponding threaded bolts made of stainless steel are standard parts of the product series.

In addition to the connectors, various IP67 D-SUB protective hoods are also part of the CONEC product range. As a metallized version, IP67 hoods also provide protection against electromagnetic interferences.

Despite the compact design, the IP67 hoods have sufficient space to accommodate all D-SUB connectors as well as Combination D-SUB connectors with integrated coaxial or high current contacts. The mounting screws are made of stainless steel.

 

IP67 CONEC SlimCon D-SUB, D-SUB High Density, Combination D-SUB

     The IP67 CONEC SlimCon connector series are available in housing sizes 1 to 3 as male and female. Due to their small size and one-piece zinc die-cast housing, they are ideally suited for industrial and harsh environments.

Four contact surfaces ensure that the connectors are always mounted evenly with the existing seal on the device wall, thus preventing overstressing of the seal and at the same time ensuring safe assembly at the customer’s site. CONEC SlimCon connectors are designed for a panel thicknesses between 0.8 mm and 1.3 mm.

The size of the housing corresponds to the standard dimensions of the D-SUB connectors and achieves a reduction of the occupied area of 48% to 52% compared to the IP67 protected connectors with extended sealing frame. This generally applies to all CONEC SlimCon connectors. 


Diğer Haberler

HIDDEN GEM..

14.09.2020 At Amphenol Procom we have an extensive range of products for a vast variety of RF applications. Within our product range we have many “hidden gems” that you may not be aware of – an example is the DPF 70/6-150…

Haber Detayı
800km AWAY..

Capturing Precision Detail with Amphenol Times Microwave

Haber Detayı
CXL 900-8C OMNI ANTENNA STURDY, 8dBd GAIN BASE ST..

In this newsletter you can read about our newly released Omni Antenna: CXL 900-8C.

Haber Detayı
EXTENSIVE RANGE OF PRODYCTS FOR A VAST VARIETY RF..

At Amphenol Procom we have an extensive range of products for a vast variety of RF applications. Within our product range we have many “hidden gems” that you may not be aware of – an example is the 7478000 Log Periodic Antenna.

Haber Detayı
AMPHENOL PROCOM DESIGNED AND DELIVERED AIRPORT RA..

Amphenol Procom designed and delivered Airport Radio Systems to airports in Sweden

Haber Detayı
HDAS NEW HYBRID VERSION..

14.10.2020

Discover our new hybrid version designed by Amphenol Socapex for your specific needs!

• Hybrid version to mix signal, power and coax
• Power contacts up to 20 A
• Reach MIL-DTL-55302 performances

Haber Detayı
AMPHENOL LAUNCHES "Amphe-Phase"..

10.07.2020

Amphe-Phase is a High Current Single pin connector with a smart design to keep performance  and safety as a top priority keeping the solution price competitive. 

Haber Detayı
NEW SENSOR TO DETECT WATER IN ELECTRIC VEHICLE BA..

21.04.2020

Amphenol Advanced Sensors, a company comprised of industry-leading sensor brands, including Thermometrics, Inc., Telaire, and NovaSensor, and known for innovative technologies and embedded measurement solutions, now offers its Coolant Leak Detection Sensor for use in Electric/Hybrid Electric Vehicles (EV/HEV) to detect the presence of water and coolant in the vehicle's battery pack enclosure. Capable of detecting even small amounts of water/coolant, the Battery Management System (BMS) then alerts the operator to take proper countermeasures to reduce the risk of pack failure and possible electrocution hazards.

Haber Detayı
İletişim Formu