Ürünler

RF Interconnects Filtre

RF Interconnects

  • The DCWG 1.2 GHz Series of high quality directional couplers have been developed to meet the rigorous requirements of MDU distribution. The solder-back design, high return loss and low insertion loss make the DCWG-SB Series ideal for any RF distribution application. Advanced PCB design assures consistent performance. The available tap values for the DCWG-SB series include: 4, 6, 9, 12, 16, 20, 24, 27, 30 dB.

    These couplers manage RF distribution over varied COAX run lengths with varied power requirements in homes, MDU’s and businesses
    Devamı
  • The BDC digital directional coupler line has led the broadband / CATV in quality and design for over a decade. Weather sealing, environmental protection, mounting options and superior electrical RF performance quickly made the BDC series the industry standard for Broadband Directional Couplers. Available in a multitude of configurations, losses and housing styles.
    Devamı
  • The BDS102H digital splitter line has led the broadband / CATV in quality and design for over a decade. Weather sealing, environmental protection, mounting options and superior electrical RF performance quickly made the BDS100 series the industry standard for Broadband Splitters.
    Devamı
  • The DOCSIS Passive is the next generation home networking gateway device allowing 100% passive broadband installation with nearly unlimited outlet potential. A preferred alternative to active in the home, this device can accommodate multiple STB's and MoCA Controllers without power supplies or signal amplification. This technology reduces installation costs, dramatically improves reliability and increases system performance by eliminating noise, ingress and egress.
    Devamı
  • A premier manufacturer of drop coaxial cables since 1948. Series 59, 6, and 11 products are used throughout the premises in today’s HFC networks. These products meet all industry standards, including ANSI / SCTE 74 2003, Specification for Braided 75 Ohm Flexible Coaxial Drop Cables. Available for indoor-premise, general purpose, aerial self-support, and burial applications. Times Fiber Communications’ innovations have improved the quality and reliability of the installation, therefore improving customer satisfaction. All TFC drop products are UV stable and resistant to extreme temperature variations. Do not trust the last portion of the last mile to any other cable but TFC's.
    Devamı
  • Amphenol RF offers a full line of pre-assembled, fixed-length cable assemblies. Fixed length assemblies are offered in all of our most popular connector series and are available in over 1400 standard configurations and lengths.
    Devamı
  • The F-Type connector series is a high performance, cost competitive threaded connector series. Primary applications of the F-Type connectors are for cable television (CATV), set-top boxes and cable modems.
    Devamı
  • The G-PF-59 is a lab-grade, high-performance push-on F-connector adapter. The G-PF-59 has been specifically designed for high-volume testing environments demanding production efficiency, durability and reliability. This adapter utilizes precision specifications, and a special high-cycle, low-tension ground spring, allowing for low insertion force and high volume testing throughput. The G-PF-59 is particularly volume effective with high-density adapter fixtures. In addition, a high-strength center conductor is used to ensure high-cycle life expectancy.
    Devamı
  • The G-Type product series are a 75 Ω series with performance up to 1 GHz. It is ideal for cable television (CATV), set top boxes and cable modems.
    Devamı
  • A premier manufacturer for coaxial cables for the telecommunications industries. Our product profile provides designs for specialized applications needing single coaxial and multi-coaxial cables in various sizes, combinations, and specifications for telecommunications as well as the radio, video, TV and information industries.

    The T10-TX10 Hardline cable line is a seamless extruded tube. TFC’s T10-TX10 cable will outlast the standard welded tube cables. This cable is designed to eliminate pinhole leaks and microcracking. This cable line can be used with all the coring tools and connectors
    Devamı
  • Broadband Satellite Splitters
    The HFS Series broadband splitters are an advanced design providing the lowest insertion loss from 5-2150 MHz while maintaining high isolation. The HFS-2 / HFS-4 power pass to one port and the HFS-2P / HFS-4P pass power to all ports.

    The HFS-*D series high-frequency splitters have been designed with diode steered circuitry, which allows the DC power to pass from any output port to the input port and prevents DC backfeeding.
    Devamı
  • Welcome to the IPA1000 series premises amplifier, the one that started the revolution. The first of its kind to provide an integrated solution with passive and active ports, this device drove the "Home Run" installation standard practiced by nearly every CATV operator in the United States. For over a decade, this premies amplifier has lead the industry in quality, features and cost, becoming a staple of the broadband industry.
    Devamı
  • The MCX (Micro Coaxial) series is a great option where weight and physical space are limited. The MCX provides broadband capability through 6 GHz in a snap-on connector design. A range of connectors are available, including printed circuit board and cable connectors. Typical applications include automotive, wireless LAN, broadband and wireless infrastructure markets. MCX connectors conform to the European CECC 22000 spec.
    Devamı
  • Amphenol's Mini-SMB 75 Ohm product series provides broadband capability through 2 GHz. Its snap-on design offers a quick connect/disconnect and utilizes die cast components in non-critical areas to provide a low-cost solution.
    Devamı
  • Mini-UHF is a miniature version of the UHF connectors that were developed for use in the radio industry. Mini-UHF connectors are designed as coaxial interconnects for applications where size, weight, and cost factors are critical. With a miniature 3/8-24 thread size, these connectors provide excellent RF performance for applications up to 2.5 GHz. Mini-UHF connectors terminate to RG-58, RG-58A, RG-58B, RG-58C, and Belden 9258 cables. Crimp-type cable plugs and jacks are available as well as panel and PCB receptacles.
    Devamı
  • The MMCX (Micro-Miniature Coaxial) product series is a micro-miniature version of the MCX. It has the all features of the MCX series, including 50 Ω impedance with a broadband capability of DC to 6 GHz and secure, fast and easy snap-on/ snap-off coupling, and a wide range of available connectors. However, MMCX connectors have a smaller footprint than the MCX series.

    MMCX is a micro-miniature connector series with a fast and easy snap-lock mechanism allowing for 360-degree rotation. MMCX connectors conform to the European CECC 22000 specification. These 50 Ω connectors offer all of the same features of theMCX series with broadband capability of DC to 6 GHz. A range of connectors is available including surface mount, edge card, and cable connectors. Common applications include broadband, instrumentation and telecommunications.
    Devamı
  • The IPA2000 Series MoCA Amplifiers are designed to maximize the MoCA frequencies within the premises while optimizing the RF band simultaneously. Completely redesigned with innovate features such as Data Stabilization, CrossTalk, and DataComm, the IPA2000 series has become the new standard in CATV amplification.

    This IPA2008DSL-RSVF has 8 active outputs and 1 passive data port.
    Devamı
  • The POE-F201C MoCA filter combines superior surge protection in a compact housing to be utilized a the point of entry or beyond legacy equipment in the home. Not only does the POE-F201C come in an in-line barrel housing, this MoCA filter can be integrated into nearly every premises device in the ABS product line including ground blocks, splitters, amplifiers, and gateway devices.
    Devamı
  • Protective caps are available for many of our products, with options for chains and mounting hardware.
    Devamı
  • The QMA is a quick disconnect version of the SMA connector. The electrical performance of the QMA includes low loss RF performance up to 18 GHz. The QMA connector offers the same high power handling capability as the SMA connector it is based on.
    Devamı
  • Amphenol RF’s QN connector is a quick disconnect version of the N-Type connector with similar internal construction, which enables fast and easy matings with minimum space requirements. The snap-on interface makes the QN connector 10 times faster than a threaded connector. Common applications include base atations and cable assemblies.
    Devamı
  • The low D.C. loop resistance of T10 and TX10 cable results in lower installation and annual power costs. These cables are ideal for urban and coastal environments, feeder or underground applications, and resistant to extensive mechanical abuse and rodent attack. These cables have a specified 1 Ghz bandwidth for all rebuilds, upgrades, or new plants, and allows a system to handle future demands.
    Devamı
  • ShieldX® coax cable solution, helps solve shielding issues by providing a TriShield cable with enhanced shielding offering the following benefits:
    • QuadShield Performance in a TriShield Design
    • Technician Friendly Prep Utilizing the QuickPrep Bonded Foil Design Adopted as an Industry Standard
    • Enhanced Transfer Impedance Prior to Flexure
    • Improved Screening Attenuation Performance Prior to Flexure
    Devamı
  • Developed in the 1960's, the SMB (sub-miniature) interface features a snap-on coupling mechanism and is available in 50 Ohm and 75 Ohm configurations. SMB products offer broadband performance with low reflection DC to 10 GHz and utilize die cast components on non-critical areas to provide a low-cost solution. Amphenol RF's SMB connectors conform to the requirements of MIL-C-39012, and the interface is in compliance with MIL-STD-348.
    Devamı
  • The SMC interface features threaded coupling with 10-32 threads and is available in 50 and 75 Ohm configurations. SMC connectors offer broadband performance with low reflection DC to 10 GHz and are primarily used in telecommunications and instrumentation applications.
    Devamı
  • SMZ connectors feature the 75 Ohm impedance and are ideal for instrumentation applications.
    Devamı
  • The Tech Service Bag II for broadband and CATV installers. Designed with an array of features, the Tech Service Bag II is also environmentally friendly using a reusable reel and flange, eliminating cardboard and plastic waste. It’s sturdy and water resistant body features a reinforced bottom capable of maintaining it’s shape and performing as a true technician assistant. Capable of holding a 500 ft reel on plastic flange, the coil can be changed quickly and easily. Cable reels pay off with an easy and fluid feel due to the unique side support design system preventing cable tangle, jams and reel lock. Built in pouches are great for extra storage to hold tools, connectors and even includes a padded slot for an iPad or tablet. The TFC Tech Service Bag II is designed for the active cable technician by eliminating extra trips to the truck, creating accurate drop lengths, eliminating waste and providing a comfortable accessory to carry tools and equipment.
    Devamı
  • Developed in the late 1950s, the TNC stands for Threaded Neill Concelman and is named after Amphenol engineer Carl Concelman. Designed as a threaded version of the BNC, the TNC connector series features screw threads for mating. TNC connectors are miniature, threaded weatherproof series with a constant 50 Ω impedance and a frequency range of DC - 11 GHz. There are two types of TNC connectors: Standard and Reverse Polarity.
    Devamı
  • Originally intended for use as a video connector in radar applications, UHF coaxial connectors are general purpose units developed for use in low-frequency systems from 0.6 - 300 MHz.
    Devamı
  • MCV™ Series 59 & 6 Connectors
    Holland Electronic’s new universal compression connectors were created with the commercial AV installers’ needs in mind. This series consists of five Universal Connectors that terminate most major brands of cable, including Plenum RG-6, RG-6, RG-59, Mini-23 AWG and Mini 25 AWG cables.

    FITS MOST MAJOR COAXIAL CABLE BRANDS
    Plenum RG-6, RG-6, RG-59, Mini 23 & Mini 25 - Our new MCV Universal Compression Connectors fit a wide variety of coaxial cables that vary in size between manufacturers. Some differences often include thickness of jacket or diameter of insulation depending on variance in materials used in the cable manufacturing process.
    Devamı
  • LMR cables are high performance coaxial communications cables designed for use in virtually all wireless system applications. The cables are more flexible than corrugated cables and exhibit much lower loss than traditional RG cables. Additional LMR products include high performance connectors in popular interfaces, prep tools, installation tools and accessories.
    Devamı
  • GHPNA Coaxial IPTV Splitters
    Holland's GHPNA splitters have been specifically designed to work in HPNA environments. The low port-to-port isolation allows HPNA communication signals to pass through the splitters to set top boxes with as little signal loss as possible. At the same time the GHPNA Series splitters provide good return loss and
    Devamı
  • The QC II F-Connector is a universal compression connector that is ideally suited for professional and consumer use. The simple to use one-piece design provides a secure 360 degree compression seal resulting in maximum RF shielding performance. The all metal design of the connector body and nut allow for unparalleled electrical and mechanical performance. The detachably coupled advanced polymer compression system is pre-positioned to ensure a consistent fit with the cable and is color coded to allow differentiation between different cable series.
    Devamı
  • Amphenol offers a full line of CATV isolators and surge protectors.

    The CPI-WHP is an IEC Class Level 5 isolator offering the surge protection performance necessary to ensure the highest telecom equipment survivability. The device protects cable modems, STB's and other CPE and plant equipment from damage due to fast transients and spikes from electrical storms and power surges.

    High winds, thunder, rain showers and flooding are commonplace in regions with high electrical storm activity. The CPI-WHP is rated to IP67 standards for protection against wind-blown objects and moisture - up to full submersion in a meter’s depth of water.
    Devamı
  • N-Type connectors, adapters, and cable assemblies are designed to satisfy the need for a durable, weatherproof, medium-size RF products with consistent performance through 11 GHz. Our N-Type connecters feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
    Devamı
İletişim Formu