Products

  1. Home
  2. Products
  3. Backshells & Glands & System Attachments
Backshells & Glands & System Attachments Filtre
Apply

Backshells & Glands & System Attachments

  • ABS1339 Standard Clamps
    ABS1339 Standard Clamps
    ABS1339 clamps provide routing, support and fixing for cable harnesses of various diameters. They are used in the wing sections of aircrafts, in the fuselage for power and electrical cables, as well as inside the cabin for in-flight entertainment or cabin service systems. Different materials and configurations are available depending on the temperature and routing of the conduits (including versions for use inside the fuel tank).
    More
  • ABS1339Light / CC1339Light
    ABS1339Light / CC1339Light
    ABS1339Light clamps provide routing, support and fixing for cable harnesses of various diameters. They are used in the wing sections of aircrafts, in the fuselage for power and electrical cables, as well as inside the cabin for in-flight entertainment or cabin service systems. Derived from legacy ABS1339 standard clamps, they offer up to 18% more weight saving.
    More
  • ABS14XX Pipe Clamps
    ABS14XX Pipe Clamps
    ABS 14xx monoblock pipe clamps allows the perfect fixing of hydraulic pipes on structure. These pipe clamps are fully designed in composite with silicon overmolding, providing a perfect protection to pipes from shock and vibrations. Multiple versions are available, for general (brown silicon) or fuel zone use (blue silicon), with 1 to 5 holes from various and mixed diameters (from 6.3 to 19 mm). ABS 14xx pipes clamps are closed and fixed on structure by screws.
    More
  • ABS2195 / CC5516 Clamps
    ABS2195 / CC5516 Clamps
    CC5516 Series is a new line of lightweight cable clamps, in composite and silicone, derived from the legacy NSA5516 metallic clamps. They are designed to keep the cable harnesses or hydraulic pipes securely maintained on a structure. They are closed and fixed on the structure by screw (not supplied), in one simple operation.
    More
  • ABS2216 Backshells
    ABS2216 Backshells
    ABS2216 is a Composite backshell compatible with MIL-DTL-38999 Series III and EN3645 connectors. It features an anti-decoupling system with 3 angles: straight, 45° and 90°. EMI and NON-EMI versions are available. The EMI backshell is provided with a band-it to better maintain EMI sleeve. The composite backshell can handle temperature from -65° to +200°.
    More
  • AS85049 Backshells
    AS85049 Backshells
    Amphenol backshells provide strain relief, environmental protection and EMI/RFI shielding at the termination area of virtually any connector. Our backshells are available in both military (MIL) specification and commercial types for most any application and meet SAE,AS85049 Standard. With a base material of either aluminum alloy, stainless steel, brass or composite and a variety of finishes, most of our backshells meeting meet or exceed RoHS and REACH compliant standard.
    More
  • Band Lock Adapters
    Band Lock Adapters
    Band Lock Adapters are another method of backshell termination. Tempered bands are tightened over the shielding, which is pulled over the banding area, using special assembly tools. Suitable over cover by heat shrink boot or other methods can be used. Banded terminations give low DC resistance.
    More
  • Consumer Access Ports (C.A.P.)
    Consumer Access Ports (C.A.P.)
    The C.A.P. Series consists of a family of connectors that provide users easy access to standard communication and power ports, but in a ruggedized format that is easily integrated into aerospace or other demanding environments. The spring loaded, 360° cover provides quick access to the front side / user port, while the equipment side is terminated in the popular Luminus or Pegasus bayonet style quick disconnect. Mounting is screw mount, panel mount, or anti-rotation jaunt.
    More
  • Crimp Ring Adapters
    Crimp Ring Adapters
    Many cable terminations where heat shrink boots are used will require provision for terminating the screens. It is achieved in this type of backshell through a ring, which can be crimped to the backshell body holding the screens in between.
    More
  • Dust Caps
    Dust Caps
    Dust Caps were developed for the environmental protection of circular connectors in both threaded & bayonet versions.  They are designed to meet the requirements of military standards.
    More
  • Environmental Backshells
    Environmental Backshells
    Environmental Backshells from Amphenol not only provide heavy cable support and strain relief but also protects the connection at the termination area with the sealing grommet and grommet follower. The strain relief nut is tightened - squeezing the grommet onto the cable jacket during assembly. These Backshells provide 6 feet water sealing protection when used with a perfectly jacketed cable and are suitable for harsh environment applications.
    More
  • Environmental EMI/RFI Backshells
    Environmental EMI/RFI Backshells
    Both individual and overall shielding can be terminated in this type, in addition to the cable sealing available in the Environmental Backshell. It is an ideal choice for heavy cabling solutions in harsh environment situations where electromagnetic and radio frequency noises are to be isolated.
    More
  • Grommet Nuts
    Grommet Nuts
    Amphenol Pcd's Grommet Nut provide a good holding force for a crimp connector when backshells are not needed. Such holding force is essential to hold the contacts and grommet in place when terminated with wire bundles.
    More
  • Lamp Thread Adapters
    Lamp Thread Adapters
    The Lamp Thread Adapter is designed with threads similar to that in the lamp base for shield termination. It is a very effective, easy and quick method of shield termination. Field maintenance is also effortless. The termination area is designed to accept ‘Nut’ as well as ‘Clamp’. The nut option enables the use of a heat shrink boot and the clamp option will facilitate the strain relief clamping without a heat shrink boot after the shield/cable termination.
    More
  • Micro D & M24308 D sub backshell
    Micro D & M24308 D sub backshell
    Micro-D Aluminum backshells available in standard, EMI shield, strain relief elliptical entry. D-Sub Backshells are available in straight, side entry, 90° & 45°.
    More
  • Micro-D EMI Backshells
    Micro-D EMI Backshells
    The Amphenol Micro-D EMI backshell series MBS is designed for use with M83513 connectors. It is a reliable means of providing EMI and strain relief for harnessed connectors.
    More
  • Modular Pipe Clamps
    Modular Pipe Clamps
    These pipe clamps allow the perfect fixing of hydraulic pipes on structure. Multiple versions are available, including conducting version. They are closed and fixed on structure by screws.
    More
  • Non-Environmental EMI/RFI Backshells
    Non-Environmental EMI/RFI Backshells
    Amphenol's Non-Environmental EMI/RFI backshell offers reliable strain relief and heavy cable support while providing electromagnetic and radio frequency noise isolation shielding. It accommodates both individual and overall shielding. Available in straight, 90° and 45° varieties.
    More
  • Pre-Shield Adapters
    Pre-Shield Adapters
    Amphenol's Pre-Shield Adapter comes with a pre-cut braid that is fitted to the adapter for easy assembly. This braid overlaps with the cable braid and effective shielding takes place due to its 360° contact. It is designed to accept a heat shrink boot, is easy to use and saves time during cable termination.
    More
  • Protective Caps
    Protective Caps
    Protect your plugs and receptacles against dust, water, moisture, EMI and contact bending. We provide protective caps for 38999 Series I, II, III (MIL-DTL-38999/EN3645), PT/451 Series (MIL-DTL-26482) and RJ/USB Field connectors. Standard caps, snap caps, rubber caps and dummy receptacles available.
    More
  • Shrink Boot Adapters
    Shrink Boot Adapters
    A good solution when the unshielded cables are terminated with heat shrink boots. It has a groove where the boot lip can be held which provides good grip apart from sufficient space inside for the cable looping. Using the heat shrink boot is one way of providing environmental protection and strain relief to cable termination. Using a suitable adapter is essential to ensure the reparability.
    More
  • SIM Module Protective Caps
    SIM Module Protective Caps
    This protective cap was designed to protect EN4165 / SIM modules from risks of damages during transportation: dust, moisture, pin contacts bending… For both male and female modules.
    More
  • SQ Adapters
    SQ Adapters
    Amphenol's SQ Adapter is a cost-effective product to terminate the braid to the adapter. The braid is pulled over the conical shape to the rear end of the adapter and tied. The end nut is tightened to ensure adequate grip for the shielding. A heat shrink boot can be used with this adapter as well.
    More
  • Strain Relief Clamps
    Strain Relief Clamps
    Amphenol's Strain Relief Clamps not only tidy-up the cable after termination, but also provide good strain relief at the termination area. It is a cost-effective cable holding option when environmental protection is not a concern, and weight saving is a major consideration.
    More
  • VG95319-1011 Backshells
    VG95319-1011 Backshells
    Backshells are available in various versions. Band adapter, double cone adapter, individual adapter, molded adapter, adapter with strain release shells for D38999 serie III. We offer a complete series of backshells for aerospace and military applications.
    More
  • Wiring Accessories
    Wiring Accessories
    Designed to secure and guide wire bundles throughout an aircraft, AirLBF’s wiring accessories were designed with strength, stability, and weight reduction in mind. They come with a large variety of sizes, shapes and materials. They are able to support large bundles and high stress requirements.
    More
Contact Form
Send