Products

  1. Home
  2. Products
  3. Sensors
Sensors Filtre
Apply

Sensors

  • A15-3P 360º position sensor
    A15-3P 360º position sensor
    This device is aimed to applications that need on-field arbitrary initial and final travel reference points calibration. Once these have been set, the A15-3P provides accurate position feedback output to the controller.

    Designed to be a cost-effective replacement for absolute encoders, the A15-3P series offers an SMD, Vertical and Through Hole mount solution for the majority of Position/Angle Rotary Sensor and multi-purpose control applications such as garage door oppeners, gauges, rotary actuators and robotics.
    More
  • Battery Pack Temperature Sensor | Thermometrics
    Battery Pack Temperature Sensor | Thermometrics
    The Battery Pack Temperature Sensor is a ring terminal temperature sensor that measures surface temperature. It is important to monitor the temperature on hybrid batteries for overcharging protection, as well as to optimize battery performance.
    More
  • Coolant Temperature Sensor (CTS) | Thermometrics
    Coolant Temperature Sensor (CTS) | Thermometrics
    The Coolant Temperature Sensor (CTS) monitors the temperature of the coolant that is being pumped around the battery to cool the battery module of EV/PHEVs. If the battery module starts to overheat, the Coolant Temperature Sensor relays a signal to the Battery Management System (BMS). The BMS uses this information to prevent battery packs from any damage and maximize the performance.
    More
  • Customised value added mechatronics
    Customised value added mechatronics
    One of our core competences has always been the high experience in manufacturing custom sensors and controls according to customers´ requirements, coping with even the hasher environments´ conditions using rotary, linear and multiturn contact and non-contact technologies. The pursuit of the most cost-effective total custom-engineered Sensors Solution for your needs is firmly embedded in our business philosophy, whatever your requirements may be, from adapting standard products to complete new designs. Rapid prototyping, low batches accepted, up to 360º measuring range, analog, PWM, SPI, switch outputs are some of the key features offered by Piher. We offer accurate and reliable 360° non-contact angular position sensing.
    More
  • Cylinder Head Temperature Sensor (CHT) | Thermometrics
    Cylinder Head Temperature Sensor (CHT) | Thermometrics
    The Cylinder Head Temperature Sensor is designed to take the place of one of the cylinder head bolts on a diesel engine. The sensor’s purpose is to measure the cylinder head temperature and to signal the vehicle’s operator if an engine overheats (that is, if an engine over-temperature is taking place). The engine will be in danger of permanent damage if it continues to run at an elevated temperature.
    More
  • DCM-PT15 detented potentiometer
    DCM-PT15 detented potentiometer
    The combination of the well-known PT15/PTC15/PS15 control potentiometers with a Detent Control Mechanism (DCM) affords the appliance designer the possibility to solder the potentiometer onto the Control PCB assembly and then, in a second operation, assemble the DCM over it. This removes the need to build Detents into the User front panel of the appliance, simplifying, and significantly reducing the total cost of the solution.

    The detent torque can be modified according to Customer requirements (depending on the input dial’s diameter, etc) as can the number and position of the detents.
    More
  • DCM-PTT detented potentiometer
    DCM-PTT detented potentiometer
    Fully customiseable detented potentiometer that features:

    -detents (or no detents)
    -end stops
    -plastic / metal shafts
    -"plug-and-play" connectors
    -"push to turn" function
    -availability as switch, encoder or potentiometer
    More
  • E-15, 15mm low profile incremental encoder
    E-15, 15mm low profile incremental encoder
    The extended temperature range (-40ºC to +120ºC) allows this encoder to be employed in extreme environmental applications where other encoders currently on the market can not be used. This in combination with optional SMD or through-hole mounting makes the E-15 series ideal for automotive heating, ventilation & air conditioning, oven & microwave (white and brown goods in general), kitchen appliance and power tools.
    More
  • Evaporator Temperature Sensor | Thermometrics
    Evaporator Temperature Sensor | Thermometrics
    Thermometrics Evaporator Temperature Sensor is used to measure evaporator core temperature. An evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and robust thermistor to measure its temperature to prevent the core from freezing. A frozen core could result in costly damage to the evaporator core and diminished HVAC operation, so that the cabin temperature can no longer be controlled.
    More
  • Exhaust Gas High Temperature Sensor | Thermometrics
    Exhaust Gas High Temperature Sensor | Thermometrics
    Thermometrics Exhaust Gas High Temperature Sensor operates over a temperature range from -40°C to 850°C. It monitors the temperature before and after SCR system in vehicle engines as part of the engine control strategy. It is designed for fast response, optimized for thermal dissipation and suitable for high vibration and corrosive environments.
    More
  • GE-1856 - Intake Air Temperature Sensor (IAT) | Thermometrics
    GE-1856 - Intake Air Temperature Sensor (IAT) | Thermometrics
    Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.Thermometrics GE-1856 Intake Air Temperature Sensor (IAT) monitors the temperature of the incoming intake air for an engine and provides a signal output that is proportional to air temperature. This signal can be used as an input to provide a signal to an ECU (Engine Control Unit). The ECU then uses this information to adjust fuel delivery and optimize the air-to-fuel ratio to produce the most efficient combustion. This sensor is also suitable for air duct temperature measurement in non-condensing HVAC applications.
    More
  • Harsh Environment Chip Thermistor - CR-1 | Thermometrics
    Harsh Environment Chip Thermistor - CR-1 | Thermometrics
    The CR-1 Harsh Environment Chip Thermistors are Sn-coated Alloy 52 leads with high performance acid and moisture resistant coating.Our NTC chip thermistors are ideal for harsh environment applications and high volume assembly.
    More
  • Harsh Media Pressure Sensor - NPR-101 | NovaSensor
    Harsh Media Pressure Sensor - NPR-101 | NovaSensor
    The NovaSensor NPR-101 Harsh Media Pressure Sensor is a silicon-based MEMS device using “Backside Absolute Pressure” technology designed for harsh media exposure, which eliminates the direct contact of the sensing circuitry with the applied media. The device is coupled with an ASIC to provide a ratiometric output proportional to the applied pressure. Integrated diagnostics included.
    More
  • Inline Flow-Through Coolant Temperature Sensor (CTS) | Thermometrics
    Inline Flow-Through Coolant Temperature Sensor (CTS) | Thermometrics
    The Thermometrics Inline Flow-Through Temperature Sensors monitor the temperature of a fluid that passes through it. A system control module receives this temperature reading and uses a control loop to control the overall system temperature. This could be engine temperature, heater temperature, industrial supply temperature, etc.
    More
  • Inrush Current Limiting Thermistor - CL Series | Thermometrics
    Inrush Current Limiting Thermistor - CL Series | Thermometrics
    Thermometrics CL Series of Inrush Current Limiting Thermistors consist of a disc thermistor with uninsulated lead-wires, and are used to control inrush current when switching power supplies. The main purpose of limiting inrush current is to prevent components in series with the input to the DC/DC convertor from being damaged. Typically, inrush protection prevents nuisance blowing of fuses or breakers as well as welding of switch contacts.
    More
  • MTS360 Miniature SMD Rotary Sensor
    MTS360 Miniature SMD Rotary Sensor
    The MTS360 provides a true breakthrough in contactless sensor technology by combining a through-shaft design with 360º absolute position feedback in an ultra miniature size. The result is the smallest fully featured rotary sensor on the market with reliability up to 25 million cycles.

    The MTS 360 relies on patented Hall effect technology to enable for the first time true non-contacting through-hole shaft sensing using standard SMD features.

    The device offers electrical angles up to 360° with no dead band and linearity as low as ±0.5%. Rated for use at -40ºC to +150ºC, the sensor can operate up to 300 rpms and can be programmed with full scale output with angles shorter than 360 degrees. Output is selectable between Analog, PWM 12 bits or Serial Protocol (SPI) at 14 bits and includes a second output channel to provide a programmable switch signal. A redundant version with a dual core sensor in the same package is also available.
    More
  • MTS-360PCB Sensor/ PCB Combo
    MTS-360PCB Sensor/ PCB Combo
    Designed with the sensor directly mounted onto a PCB, the innovative MTS-360 Sensor/PCB Combo package allows engineers to easily mount a fully featured rotary sensor without first having to design a printed circuit board for the sensor. The result is time-savings and convenience.

    The MTS-360 Sensor/PCB assembly is available with or without 2.54 mm pitch connector, both easily secured with standard M3 screws. The entire assembly measures just 35mm wide by 36mm long, allowing for applications with tight packaging constraints.

    The new MTS-360PCB Mechanical Mount sensor model incorporates all the breakthrough sensor technology performance features of the original MTS-360 by merging a through-shaft design with 360º absolute position feedback in a small size package. The result is an extremely small fully featured rotary sensor with reliability up to 50 million cycles. The MTS-360 relies on patented Hall effect technology to enable true non-contacting through-hole shaft sensing now using a simple three eared mounting. The standard model features a 4mm double D-flat through-hole and (3) slotted mounting holes allowing final rotational adjustment at assembly.
    More
  • N6 6mm carbon potentiometer
    N6 6mm carbon potentiometer
    6mm low cost carbon potentiometer. For long life and lead free reflow soldering please use the product N6R.
    More
  • N6R miniature potentiometer
    N6R miniature potentiometer
    The N6R is a unique, fully RoHS ready miniture potentiometer with all the features of the traditional full size types. The combination of the 10k mechanical life, reduced form factor, RoHS reflow compatibility and overmoulding technology provides market leading performance in a compact, robust design.

    The N6R Long Life "E" version has been conceived for the appliance and automotive industries to provide a cost effective solution. Further options include improved linearity, a 360º endless rotation option and a selection of shafts and knobs. Ask for double reflow potentiometers and geared potentiometers here.
    More
  • NovaSensor NPR-101 | Harsh Media Pressure Sensor
    NovaSensor NPR-101 | Harsh Media Pressure Sensor
    The NovaSensor NPR-101 Harsh Media Pressure Sensor is a silicon-based MEMS device using “Backside Absolute Pressure” technology designed for harsh media exposure, which eliminates the direct contact of the sensing circuitry with the applied media. The device is coupled with an ASIC to provide a ratiometric output proportional to the applied pressure. Integrated diagnostics included.
    More
  • NPL Linear position sensor
    NPL Linear position sensor
    Features:
    * High reliability.
    * Simple construction (only 3 component parts).
    * Over-moulding manufacturing technique.
    * Plastic or metal clip versions available.
    * Various fixation means: clip type (inward/outward actuating), locating pins,...
    * Provides a low cost, highly reliable solution for all position sensing applications: automotive seat position memory, central locking, headlamp position and rear-view mirror position sensors.
    More
  • NTC Thermistors - Epoxy Type | Thermometrics
    NTC Thermistors - Epoxy Type | Thermometrics
    Epoxy-coated thermistors are generally used at temperatures below 150°C. Choose from our extensive range of resistances and beta values.

    Thermometrics offer two types of Thermistors:
    * Interchangeable Thermistors
    * Type RL Epoxy Thermistors
    More
  • NTC Thermistors - Glass-Encapsulated Diode Series | Thermometrics
    NTC Thermistors - Glass-Encapsulated Diode Series | Thermometrics
    Thermometrics Diode Series of Glass-Encapsulated NTC Thermistors consists of a range of NTC chip thermistors in DO-35 style glass package (diode outline) with axial solder-coated copper-clad steel wires. Glass body provides hermetic seal and voltage insulation and excellent stability. Designed for accurate temperature measurement, control and compensation in various applications, including automotive, telecom, HVAC and white goods. Also for use in temperature sensing for household appliances, such as rice cookers, electronic ranges and ovens, and industrial products, such as pharmaceuticals, chemicals, and components.
    More
  • NTC Thermistors - Radial Lead | Thermometrics
    NTC Thermistors - Radial Lead | Thermometrics
    Thermometrics offers point-matched Radial Lead Disc Thermistors with bare lead wires in a wide range of material systems.

    NTC Thermistors- Radial lead / Applications / Description
    Thermometrics -Uncoated Disc Radial Leads NTC Thermistor Type RL10 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
    Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL14 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
    Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL20 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
    Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL30 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
    Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type RL35/40/45 / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Point-matched disc thermistor with bare lead-wires.
    Thermometrics - Uncoated Disc With Radial Leads NTC Thermistors Type SA / "Suitable for temperature measurement, control and compensation Suitable for PCB and probe mountings" / Interchangeable thermistor with bare lead-wires.
    More
  • Oil Pressure Switch | Thermometrics
    Oil Pressure Switch | Thermometrics
    The Thermometrics Oil Pressure Switch can be used in all vehicles monitors the engine oil flow when the engine starts. It can detect oil pressure and enables the EMS ECU to check for the lack of oil. It can also send an alarm signal to the driver, helping to avoid engine damage due to overheating
    More
  • Oil Temperature Sensor (OTS) | Thermometrics
    Oil Temperature Sensor (OTS) | Thermometrics
    Thermometrics Oil Temperature Sensor (OTS) monitors the temperature of the engine oil in a vehicle and displays this measurement to the vehicle’s occupants. If a vehicle operates at too high a temperature, the engine can be in danger of damage. The OTS prevents this by allowing the operator to stop the vehicle and switch off the engine if the temperature of the oil gets too high as a result of an over heated engine.
    More
  • Outside Air Temperature Sensor (OAT) | Thermometrics
    Outside Air Temperature Sensor (OAT) | Thermometrics
    Thermometrics Outside Air Temperature Sensor (OAT) measures the temperature outside of a vehicle's passenger compartment. It relays the outside air temperature to the controller of the automatic HVAC system. The controller uses this temperature to help control the interior temperature of the vehicle. The sensor also provides the vehicle occupants with temperature readings from outside the car. This information is particularly useful when driving under near-freezing or freezing conditions. The sensor is usually mounted inside or near the front bumper or in the side mirror.
    More
  • PC-16, 16mm panel potentiometer
    PC-16, 16mm panel potentiometer
    16mm potentiometers enclosed in plastic housing with a shaft and IP54 ingress protection rating.

    These provide full customisation capabilities, such as:
    * Electrical and mechanical specifications.
    * Custom mechanical life.
    * Special outputs (linear, log, anti-log, bespoke).
    * Absolute or independent linearity values.
    * Special resistance value and tolerance.
    * Mechanical and electrical angles.
    * Switch.
    * Selectable busing and shafts lenghts and shapes.
    More
  • Potentiometers with detents
    Potentiometers with detents
    This product family has been specifically developed to allow the integration of otherwise large and expensive external mechanisms into the body of the majority of the 6, 10 & 15 mm potentiometer series thus allowing a high range of configurations: special tapers, tolerances, linearity, cut track, etc.

    This detent design not only adds a "click" sensation of position, but also offers enormous savings in both cost and space for any given application.
    Strong and weak detents can be mixed as per cutomer´s request.


    - Replacement for:
    • Existing customer detent mechanisms.
    • Multi-pole switches.
    • 3 or 4-bit absolute encoders (connecting to microprocessor analogue input).
    - Analogue signal presets.
    - Temperature control settings.
    - Relay Timers.

    PT´s with detents also lend themselves perfectly to industrial and domestic power tool applications where the detents prevent accidental movement of the potentiometer under vibration.

    If high torque detents are required please see our Detent Control Mechanism (DCM) series datasheets. As previously highlighted, this family is indispensable wherever both cost and space saving reductions are important, or where a series of fixed positions along the potentiometer travel are required.
    More
  • Pressure Sensor Die - P1602 | NovaSensor
    Pressure Sensor Die - P1602 | NovaSensor
    The NovaSensor P1602 Pressure Sensor Die is a piezoresistive pressure sensor offered in a miniature die. When excited with 1 mA constant current, the P1602 produces a millivolt output that is proportional to input pressure. The P1602 is available as an absolute pressure sensor, where the applied pressure is referenced to an internal vauum sealed within the die. With NovaSensor SenStable®, the P1602 will provide very low long-term stability erros and excellent repeatability.
    More
  • Printed PCB resistors
    Printed PCB resistors
    Printed Resistors PCB are thick-film resistive ink elements designed around customers’ unique assemblies. PIHER’s thick film inks can be printed on a wide range of substrates — from high temperature ceramics to common PCB materials.

    Our market-leading thick-film technology can be used to deposit any combination of fixed resistors, switches, sensors, potentiometer tracks and conductors onto virtually any size, shape or PCB form. This versatility offers an enormous range of design possibilities at competitive prices,even in low batch quantities.

    Once screened and cured, these resistive tracks can be individually laser trimmed to obtain very accurate tolerances in high volume.

    We also offer custom wiper (contact) assemblies as standard products or we can design and manufacture according to customers´ bespoke design requirements.

    This technology is ideal for three-wire voltage-divider (potentiometer) designs. Here, we offer in-process calibration and resistive (ohmic) process control, allowing for tight matching within lots and high precision voltage ratios between key points in the circuit.
    More
  • PS10 & PSX-10, 10mm SMD potentiometer
    PS10 & PSX-10, 10mm SMD potentiometer
    The PS-10 & PSX-10 potentiometers arespecifically designed for leadfree reflow soldering processes (excellent performance).
    More
  • PS-15 & PSX-15 15mm SMD potentiometer / sensor
    PS-15 & PSX-15 15mm SMD potentiometer / sensor
    This sensor offers a new surface mountable solution for detecting changes in angle and position and converting them into a highly reliable voltage output. The sensor can be processed by standard automated placement equipment and reflow (or lead-free reflow) soldered. For applications where rotor angle is critical, locating pins are available.

    The PS15 Series is available with seven different rotor designs and 15 shaft styles. This offering allows Piher to configure a custom sensing solution for virtually any control or position feedback requirement. The result is a customized sensor that maximizes board density, reduces weight and eases assembly while achieving the engineer’s critical sensor design goals for the application.

    A wide range of options, including up to 38 detents, allows further customization. Detents not only add a crisp "click" sensation for each position without affecting the original sensor specification or performance, but also offer significant savings in both cost and space; and are particularly advantageous in industrial and domestic power tool applications to prevent accidental movement.
    More
  • PS2P-ARC Touchless sensor
    PS2P-ARC Touchless sensor
    The touchless variable air gap sensor creates immunity to radial and axial play on mobile shafts where significant misalignment results in poor operational performance and labour intensive maintenance programmes. It complements our PS2P-LIN and PS2P-CON series of air-gap non-contact linear and angular position sensors.

    A round or arc magnet (where 360º rotation angle is unnecessary) is attached to rotating parts of kit, such as boom loaders, skid steer buckets and hitch arms, and the electronics module to the chassis (or vice versa).

    Here, Piher separates the magnet from the electronics module. As an absolute sensor it will not loose the values even after a power failure.

    All Piher sensors are compact, low-profile, yet extremely rugged and can be custom-engineered to fit existing mechanical assemblies.
    More
  • PS2P-CON, concentric touchless sensor
    PS2P-CON, concentric touchless sensor
    The PS2P-CON sensor creates immunity to radial and axial play on mobile shafts where significant misalignment results in poor operational performance and labour intensive maintenance programmes. It complements our PS2P-LIN and PS2P-ARC series of air-gap non-contact linear and angular position sensors.

    A magnet is attached to rotating parts of kit, such as boom loaders, skid steer buckets and hitch arms, and the electronics module to the chassis (or vice versa).

    As an absolute sensor it will not loose the values even after a power failure.

    All Piher touchless sensors are compact, sealed, low-profile, yet extremely rugged and can be custom-engineered to fit customers´ specifications and existing mechanical assemblies.
    More
  • PS2P-LIN, linear touchless position sensor.
    PS2P-LIN, linear touchless position sensor.
    The PS2P-LIN linear sensors create immunity to magnet´s misalignment that negatively impacts operational performance and results in labour intensive maintenance programmes. It complements our PS2P-CON and PS2P-ARC series of air-gap non-contact angular rotary position sensors.

    A magnet is attached to moving parts of kit, such hydraulic/pneumatic controls & gear selector, and the electronics module to the chassis (or viceversa).

    As absolute sensors, they will not loose the values even after a power failure.

    All Piher touchless sensors are compact, sealed, low-profile, yet extremely rugged and can be custom-engineered to fit customers´ specifications and existing mechanical assemblies.
    More
  • PS-6 & PSX-6 6mm SMD potentiometer
    PS-6 & PSX-6 6mm SMD potentiometer
    The PS-6 & PSX-6 potentiometers were specifically designed for leadfree reflow soldering processes (excellent performance).
    More
  • PSC-360 angle / position sensor
    PSC-360 angle / position sensor
    The robust PSC-360 is a low-cost high performance non-contacting rotary position sensor for automotive, off-road, medical and industrial applications whithout the limitations of potentiometric solutions (wear, limited electrical angles...) A configurable switch ouptput is integrated within the sensor too.

    Full redundancy can be achieved by employing a dual core version or the simple placement of two sensors within the housing.

    Sealed and flange mounted for easy positioning when necessary, it provides high stability under harsh environment conditions such as vibration, shock, extreme temperatures / humidity, dither, moisture or dirt. Featuring a modular architecture, electrical & mechanical characteristics can be fully customised to customer´s needs as well as connector configurations.
    More
  • PSC-360U angle / position sensor
    PSC-360U angle / position sensor
    The robust PSC-360U is a panel mount, low-cost, high performance, non-contacting rotary position sensor for automotive, off-road, medical and industrial applications whithout the limitations of potentiometric solutions (wear, limited electrical angles...) A configurable switch ouptput is integrated within the sensor too.

    Full redundancy can be achieved by employing a dual core version or the simple placement of two sensors within the housing.

    Sealed and flange mounted for easy positioning when necessary, it provides high stability under harsh environment conditions such as vibration, shock, extreme temperatures / humidity, dither, moisture or dirt. Featuring a modular architecture, electrical & mechanical characteristics can be fully customised to customer´s needs as well as connector configurations.
    More
  • PST-360 angle / position sensor
    PST-360 angle / position sensor
    The PST-360 through / hollow shaft position sensor combines three critical design features; 1) through hole where the shaft passes through the sensor, 2) high accuracy absolute position feedback over up to 360°, and 3) a true non-contacting sensing element. Piher’s design does not rely on gears or other rotating parts.
    More
  • PT series, rotary switches-potentiometers
    PT series, rotary switches-potentiometers
    For more than 20 years PIHER has been manufacturing rotary switches for all types of applications. Cost-effective and highly customiseable products with our huge experience in adapting them to customers´ needs when necessary. We have the best solution for all your rotary switching needs. Our products are widely used in Automotive, Consumer and Multimedia applications due to their excellent performace and quality/price ratio.

    ISO TS1649, ISO14001, ISO 9001, Lead-Free compliance and hundreds of satisfied customers are the best presentation card. Here we are presenting to you our Rotary Switches based on our PT series. We strongly recommend you to visit www.piher.net for our PC16, S15 and T-21 rotary switches and our full product range that includes Potentiometers, Encoders and Position Sensors.
    More
  • PT-10, 10mm carbon potentiometer / sensor
    PT-10, 10mm carbon potentiometer / sensor
    10mm carbon potentiometer
    More
  • PT-15, 15mm potentiometer / sensor
    PT-15, 15mm potentiometer / sensor
    Our PT-15 series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs"
    More
  • PT-6, 6 mm carbon potentiometer
    PT-6, 6 mm carbon potentiometer
    6 mm through-hole carbon potentiometer with a high level of customisation possibilities, such as:
    * Electrical and mechanical specifications.
    * Custom mechanical life.
    * Mechanical design.
    * Detents.
    * Special outputs (linear, log, anti-log, bespoke).
    * Absolute or independent linearity values.
    * Special resistance value and tolerance.
    * Mechanical and electrical angles.
    * Switches.
    * Custom shafts and knobs.
    More
  • PTC Type Thermistors - PTF Series | Thermometrics
    PTC Type Thermistors - PTF Series | Thermometrics
    The Thermometrics PTF Series of PTC Type Thermistors consists of a range of radially-wired bare PTC disc thermistors. They are designed for general purpose over-current and short circuit protection.
    More
  • PTC Type Thermistors - PTO Series | Thermometrics
    PTC Type Thermistors - PTO Series | Thermometrics
    The Thermometrics PTO Series of PTC Type Thermistors consists of a range of radially-wire bare PTC disc thermistors for current regulation, circuit protection and temperature measurement and control. Available in a broad range of resistances, transition temperatures and voltage ratings.
    More
  • PTC Type Thermistors - YM Series | Thermometrics
    PTC Type Thermistors - YM Series | Thermometrics
    The Thermometrics YM Series of PTC Type Thermistors consists of a range of radially wired PTC disc thermistors with silicone resin coating with a wide range of operating current levels. Designed for general purpose over-current, overvoltage and direct over-temperature protection.
    More
  • PTC-10, 10mm cermet potentiometer / sensor
    PTC-10, 10mm cermet potentiometer / sensor
    Our PT series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs"
    More
  • PTC-15, 15mm cermet potentiometer
    PTC-15, 15mm cermet potentiometer
    15mm cermet potentiometer. Our PT series are worldwide known, they are widely used in the household appliance and automotive market and it is difficult to find a home or a car without one of our "PTs".
    More
  • S-15 rotary switch
    S-15 rotary switch
    The N-15 potentiometer/sensor series has been expanded to incorporate both encoders and rotary switches in the same package configuration allowing the user to design in any one of the three options whilst keeping the same board layout and user interface.

    The S-15 switch series has been specifically designed to offer a flexible and customiseable rotary switch/sensor solution for the automotive industry typically employed as multi-position interior/exterior lighting, Traction or Airbag enable/disable controls. The technology developed for the aforementioned S-15 solutions is also available for all types of custom switches however demanding your application may be.
    More
  • SM-10 / SMC10, 10mm potentiometers
    SM-10 / SMC10, 10mm potentiometers
    10mm potentiometers enclosed in plastic housing with a shaft and with IP54 ingress protection rating.
    More
  • SM-15 / SMC15, 15mm potentiometers
    SM-15 / SMC15, 15mm potentiometers
    15mm potentiometers enclosed in plastic housing with a shaft and with IP54 ingress protection rating.
    More
  • ST-15 Endless rotation 15mm potentiometer/sensor
    ST-15 Endless rotation 15mm potentiometer/sensor
    The Model ST-15 offers engineers an endless rotation version of the popular PT-15 rotary potentiometer. This new 360º version adds endless clockwise (CW or CCW) rotation as a part of the current features of the PT-15s already highly configurable mechanical and electrical specifications. That means a wide variety of off-the-shelf mounting methods, custom ohmic (resistance) values, tight linearity performance, along with the 7 different rotor designs and 15 standard shaft styles.

    This potentiometer offers product designers the flexibility of allowing users full rotational access across the normal stops that have, up to now, limited mechanical rotation. With this design feature, engineers can now design product command features over a 340º range (active electrical travel). For maximum design versatility, the endless rotation feature can be combined upon request with detents to provide users tactile feedback on each setting and selection – with up to 51 unique detent positions. Virtually any appliance rotary feedback requirement can be configured using the PT-15s wide range of standard features. Other interesting optional features include flame-retardant plastics (meets UL Standard 94 V0), detents, rotors and shafts, long cycle life, SMT mounting and custom electrical angles.
    More
  • Surface Mount Pressure Sensors - NPA Series | NovaSensor
    Surface Mount Pressure Sensors - NPA Series | NovaSensor
    The NovaSensor NPA Series of Surface Mount Pressure Sensors is a new family of OEM miniature pressure sensing products offering best in class performance for OEM applications in healthcare, industrial and transportation markets. Packaged in an industry standard surface mount SOIC14 pin package, the NPA Series is available in Gage, Absolute or Differential pressure ranges from 0 to 10" H20 to 0 to 30PSI with either un-calibrated millivolt outputs or in fully calibrated, amplified analog or 14bit digital outputs.

    The NPA sensor is intended for printed circuit board mounting and delivered in optional tape and reel ready for automated manufacturing and reflow soldering operations.
    More
  • Surface Mount Pressure Sensors - NPP-301 Series | NovaSensor
    Surface Mount Pressure Sensors - NPP-301 Series | NovaSensor
    The NovaSensor NPP-301 Series features silicon pressure sensors in surface mount packages. An ultra-small Silicon Fusion Bonded (SFB), ultra-high stability SenStable® piezoresistive chip from NovaSensor is placed in a plastic package that exploits high volume, leadframe package technology to bring forth a low-cost sensor alternative to the OEM user.

    The NPP-301 Series produces a voltage output that is linearly proportional to the input pressure. The user can provide NPP Series products with signal conditioning circuitry to amplify the output signal or to maximize OEM value added. The NPP-301 Series is compatible with most non-corrosive gases and dry air.
    More
  • T16, 16mm rotary potentiometer
    T16, 16mm rotary potentiometer
    16mm carbon potentiometers with excellent rotational torque and high mechanical endurance.
    More
  • T21, 21mm rotary potentiometer
    T21, 21mm rotary potentiometer
    21mm carbon potentiometers with excellent rotational torque and high mechanical endurance.
    More
  • Thermometrics NTC Thermistors | Surface Mount Devices (SMD)
    Thermometrics NTC Thermistors | Surface Mount Devices (SMD)
    Thermometrics NTC Type Surface Mount Devices (SMD) are intended for temperature measurement, control and compensation. They are suitable for standard soldering techniques and availabe in a range of sizes, including 0402, 0603, 0805 and 1206.
    More
  • Thermopile Infrared (IR) Sensor - ZTP-015 | Thermometrics
    Thermopile Infrared (IR) Sensor - ZTP-015 | Thermometrics
    Thermometrics ZTP-015 Thermopile Infrared (IR) Sensor is used for non-contact surface temperature measuring. The ZTP-015 Model consists of thermo-elements, flat infrared filter and a thermistor for temperature compensation, all in a hermetically-sealed TO-46 (18) package. There are also a variety of filters available to help maximize performance in specific applications.
    More
  • Transmission Fluid Temperature Sensor (TFT) | Thermometrics
    Transmission Fluid Temperature Sensor (TFT) | Thermometrics
    Thermometrics Transmission Fluid Temperature Sensor (TFT) measures the temperature of transmission fluid. It provides input to the control module to modify shift patterns for smoother shifting in automatic transmissions, and also provides over-temperature protection by locking the torque convertor.
    More
  • Type Chip NTC Thermistor in Eyelet Tag - JR Series | Thermometrics
    Type Chip NTC Thermistor in Eyelet Tag - JR Series | Thermometrics
    The Thermometrics NTC Type JR Series of Chip Thermistors in Eyelet Tag are chip thermistors with insulated flexible wires and housed in an eyelet tag. Suitable for surface temperature measurement. Typical applications include semi-conductor heatsinks and enclosure panels.
    More
  • Variable air gap touchless sensor
    Variable air gap touchless sensor
    Custom touchless magnetic Hall effect variable air gap angle/position sensor maintains stable electrical output and specified linearity on mobile shafts despite radial and axial movements of over +/- 5mm.

    This sensor will deliver the same level of precision and stability throughout its life as the first day it was installed -despite extremes of vibration, shock, temperature and contamination.
    A round or arc magnet (where 360º rotation angle is unnecessary) is attached to rotating parts of kit, such as boom loaders, skid steer buckets and hitch arms, and the electronics module to the chassis (or vice versa). As an absolute sensor it will not loose the values even after a power failure.
    More
  • Water Temperature Sensor (WTS) | Thermometrics
    Water Temperature Sensor (WTS) | Thermometrics
    Thermometrics Water Temperature Sensor (WTS) monitors the temperature of the coolant that is being pumped around the engine block to cool the engine to notify the driver of the vehicle if the engine starts to overheat. The goal is to relay an over-temperature engine temperature to the driver, so that the vehicle can be stopped and the engine switched off before the heat causes any permanent damage to the engine.
    More
  • Z-15, 15mm position sensor
    Z-15, 15mm position sensor
    Targeted for Powertrain and other Critical applications, the Z-15 has been specifically designed to be integrated within the existing final application (throttle body, air-intake valve…) to avoid the duplication of costs associated with the standard “bolt-on” alternatives that prevail in the marketplace.
    Moreover, because of the cost effectiveness of the Z-15 solution, TRUE redundancy can be achieved employing two or more ganged Z-15’s.
    More
Contact Form
Send