Products

  1. Home
  2. Products
  3. Backshells & Glands & System Attachments
Backshells & Glands & System Attachments Filtre
Apply

Backshells & Glands & System Attachments

  • 3308 Spacers
    3308 Spacers
    Series 3308 Spacers adhere to the ABS1144 standard and are suitable for aircraft and military. These spacers maintain a prescribed space between 2 cable paths. Distance options : 25, 50 or 75 mm.
    More
  • ABS1339 Standard Clamps
    ABS1339 Standard Clamps
    ABS1339 clamps provide routing, support and fixing for cable harnesses of various diameters. They are used in the wing sections of aircrafts, in the fuselage for power and electrical cables, as well as inside the cabin for in-flight entertainment or cabin service systems. Different materials and configurations are available depending on the temperature and routing of the conduits (including versions for use inside the fuel tank).
    More
  • ABS1339Light / CC1339Light
    ABS1339Light / CC1339Light
    ABS1339Light clamps provide routing, support and fixing for cable harnesses of various diameters. They are used in the wing sections of aircrafts, in the fuselage for power and electrical cables, as well as inside the cabin for in-flight entertainment or cabin service systems. Derived from legacy ABS1339 standard clamps, they offer up to 18% more weight saving.
    More
  • ABS1424 Accessories
    ABS1424 Accessories
    Designed to help guide wire bundles through aircraft and vehicles, AirLBF’s Standoffs were designed with strength, stability, and weight reduction in mind. These standoffs are made with black thermoplastic and conform to ABD031 and FAR 25853 flammability standards. There are two types of these standoffs - Type I has an operating temperature range of -67° to 266° and uses a screw mount; whereas Type II has an operating temperature range of -67° to 185° and uses a tie-down mount.
    More
  • ABS14XX Pipe Clamps
    ABS14XX Pipe Clamps
    ABS 14xx monoblock pipe clamps allows the perfect fixing of hydraulic pipes on structure. These pipe clamps are fully designed in composite with silicon overmolding, providing a perfect protection to pipes from shock and vibrations. Multiple versions are available, for general (brown silicon) or fuel zone use (blue silicon), with 1 to 5 holes from various and mixed diameters (from 6.3 to 19 mm). ABS 14xx pipes clamps are closed and fixed on structure by screws.
    More
  • ABS1688 Accessories
    ABS1688 Accessories
    Designed to help guide hydraulic pipes through aircraft and vehicles, AirLBF’s composite mounting tracks were designed with strength, stability, and weight reduction in mind. They are made with black thermoplastic and conform to ABD031 and FAR25853 flammability standards.
    More
  • ABS1694 Accessories
    ABS1694 Accessories
    Designed to help guide ventilation conduits through aircraft and vehicles, AirLBF’s composite mounting tracks were designed with strength, stability, and weight reduction in mind. They are made with black thermoplastic and conform to ABD031 and FAR25853 flammability standards.
    More
  • ABS1695 Accessories
    ABS1695 Accessories
    Designed to help guide ventilation conduits through aircraft and vehicles, AirLBF’s composite mounting tracks were designed with strength, stability, and weight reduction in mind. They are made with black thermoplastic and conform to ABD031 and FAR25853 flammability standards.
    More
  • ABS2195 / CC5516 Clamps
    ABS2195 / CC5516 Clamps
    CC5516 Series is a new line of lightweight cable clamps, in composite and silicone, derived from the legacy NSA5516 metallic clamps. They are designed to keep the cable harnesses or hydraulic pipes securely maintained on a structure. They are closed and fixed on the structure by screw (not supplied), in one simple operation.
    More
  • ABS2216 Backshells
    ABS2216 Backshells
    ABS2216 is a Composite backshell compatible with MIL-DTL-38999 Series III and EN3645 connectors. It features an anti-decoupling system with 3 angles: straight, 45° and 90°. EMI and NON-EMI versions are available. The EMI backshell is provided with a band-it to better maintain EMI sleeve. The composite backshell can handle temperature from -65° to +200°.
    More
  • ABS2225 Accessories
    ABS2225 Accessories
    Designed to help guide wire bundles through aircraft and vehicles, AirLBF’s composite mounting tracks were designed with strength, stability, and weight reduction in mind. They are made with black thermoplastic and conform to ABD031 and FAR25853 flammability standards.
    More
  • AlumaLight
    AlumaLight
    The industry’s only lightweight metal backshell solution for composite applications.With its unmatched combination of decreased weight, dependable performance, and competitive price, AlumaLight exceeds the performance and functionality of Mil-standards and is more durable than composites with enhanced EMI performance.
    More
  • AS85049 Backshells
    AS85049 Backshells
    Amphenol backshells provide strain relief, environmental protection and EMI/RFI shielding at the termination area of virtually any connector. Our backshells are available in both military (MIL) specification and commercial types for most any application and meet SAE,AS85049 Standard. With a base material of either aluminum alloy, stainless steel, brass or composite and a variety of finishes, most of our backshells meeting meet or exceed RoHS and REACH compliant standard.
    More
  • ATEX Cable Glands
    ATEX Cable Glands

    ATEX Cable Glands

    More
  • Band Lock Adapters
    Band Lock Adapters
    Band Lock Adapters are another method of backshell termination. Tempered bands are tightened over the shielding, which is pulled over the banding area, using special assembly tools. Suitable over cover by heat shrink boot or other methods can be used. Banded terminations give low DC resistance.
    More
  • Cable Gland
    Cable Gland

    Cable Gland

    More
  • Cable Glands Industrial
    Cable Glands Industrial

    Cable Glands Industrial

    More
  • Cable Joiner
    Cable Joiner

    Cable Joiner

    More
  • Cable Separators
    Cable Separators
    Amphenol’s Cable Separators are used to help separate cable harnesses from one another, aiding in organizing cable routing throughout the aircraft.  Available in either Nylon or PEEK, they maintain clearance between two parallel or crossing cable harnesses preventing wire abrasion.  Nine different versions are available and they are qualified to Airbus standard ABS1144.
    More
  • Cable Supports
    Cable Supports
    Amphenol’s Cable Supports are made to fix on an aircraft’s airframe, helping to secure and manage cable harnesses as they run throughout the aircraft body. They are offered in nylon and are designed for use in airframe, fuel tank, and engine applications. Available in various standard configurations and sizes, Amphenol also offers customized products to help meet specific customer requirements.
    More
  • Composite Backshells
    Composite Backshells
    Designed to support weight saving initiatives, as well as severe corrosion environments. They are suitable for lightweight applications, such as in commercial aerospace. These products complement Amphenol's field-proven, Backshell line.
    More
  • Conductive Seals for MIL Connectors
    Conductive Seals for MIL Connectors
    Suitable for MIL-DTL-5015, MIL-DTL-26482-Serie I, MIL-DTL-38999-Serie III.
    More
  • Conductive Seals for VG Connectors
    Conductive Seals for VG Connectors
    Conductive seals according to VG96940-6 suitable for: VG95234, VG95319, VG95328, VG95342, VG96912 & VG96929
    More
  • Consumer Access Ports (C.A.P.)
    Consumer Access Ports (C.A.P.)
    The C.A.P. Series consists of a family of connectors that provide users easy access to standard communication and power ports, but in a ruggedized format that is easily integrated into aerospace or other demanding environments. The spring loaded, 360° cover provides quick access to the front side / user port, while the equipment side is terminated in the popular Luminus or Pegasus bayonet style quick disconnect. Mounting is screw mount, panel mount, or anti-rotation jaunt.
    More
  • Crimp Ring Adapters
    Crimp Ring Adapters
    Many cable terminations where heat shrink boots are used will require provision for terminating the screens. It is achieved in this type of backshell through a ring, which can be crimped to the backshell body holding the screens in between.
    More
  • CRN Brackets
    CRN Brackets
    The CRN Bracket is custom made to hold the “Current Return Network” in place inside a composite aircraft. Very easy to install with a bolt, the CRN system is fixed in place by hand with an integrated snap system on the bracket.  The bracket is made of PEEK material, and silicone is compression over-molded onto the bracket.
    More
  • Dust Caps
    Dust Caps
    Dust Caps were developed for the environmental protection of circular connectors in both threaded & bayonet versions.  They are designed to meet the requirements of military standards.
    More
  • Environmental Backshells
    Environmental Backshells
    Environmental Backshells from Amphenol not only provide heavy cable support and strain relief but also protects the connection at the termination area with the sealing grommet and grommet follower. The strain relief nut is tightened - squeezing the grommet onto the cable jacket during assembly. These Backshells provide 6 feet water sealing protection when used with a perfectly jacketed cable and are suitable for harsh environment applications.
    More
  • Environmental EMI/RFI Backshells
    Environmental EMI/RFI Backshells
    Both individual and overall shielding can be terminated in this type, in addition to the cable sealing available in the Environmental Backshell. It is an ideal choice for heavy cabling solutions in harsh environment situations where electromagnetic and radio frequency noises are to be isolated.
    More
  • Fairlead Blocks
    Fairlead Blocks
    Designed to ensure that pipes and tubes are properly secured throughout their entire length, Amphenol's Fairlead Blocks provide stability against surges and vibration and are available in multiple materials depending on the required chemical environment. Our blocks accommodate a wide range of tube diameters and the products can be supplied with all-captive components, eliminating loose parts and potential FOD.
    More
  • FICX
    FICX

    FICX

    More
  • Grommet Nuts
    Grommet Nuts
    Amphenol Pcd's Grommet Nut provide a good holding force for a crimp connector when backshells are not needed. Such holding force is essential to hold the contacts and grommet in place when terminated with wire bundles.
    More
  • Harness & Hat Supports
    Harness & Hat Supports
    Designed to secure and guide wire bundles throughout an aircraft, Amphenol’s Harness and Hat Supports were designed for lean manufacturing and durability.  Built in a one-piece, lightweight design with multiple fixing points, the high performance products are strong, durable and make wire bundle installation and maintenance easy. They are able to support large bundles and high stress requirements.
    More
  • Jig Board Clamps
    Jig Board Clamps
    Amphenol's Jig Board Clamps are made for pre-installation wire harness assembly. Made of Acetal, our durable clamps maintain their original shape after continuous use and their smooth edges diminish wear on the harnesses as they are being assembled. Developed in multiple sizes, can accommodate a wide range of cable diameters, while the one-piece design enables efficient inventory management.
    More
  • Lamp Thread Adapters
    Lamp Thread Adapters
    The Lamp Thread Adapter is designed with threads similar to that in the lamp base for shield termination. It is a very effective, easy and quick method of shield termination. Field maintenance is also effortless. The termination area is designed to accept ‘Nut’ as well as ‘Clamp’. The nut option enables the use of a heat shrink boot and the clamp option will facilitate the strain relief clamping without a heat shrink boot after the shield/cable termination.
    More
  • LDG P-Clamps
    LDG P-Clamps
    Amphenol's LDG P-Clamps use an overmolded soft rubber for clamp cushioning, thereby reducing wear and tear on mission-critical cable harnesses without compromising the strength and performance of the clamp itself. Specifically designed for high-performance aerospace cables, such as the MT/MTL product lines, they are easy to use, simple to maintain, and available in 17 different sizes.
    More
  • Lightening Bushings
    Lightening Bushings
    Amphenol’s QuickSNAP Lightening Bushings are made to help guide wired bundles through the aircraft’s frame and stringers.  Unlike traditional lightening bushings, our products significantly reduce installation times and reduce the amount of foreign object debris (FOD).  The lightweight QuickSNAP’s are made with smooth edges in order to reduce wire chaffing, and although they are available in various standard configurations and sizes, customization is always an option.
    More
  • Metal Flanges
    Metal Flanges
    Amphenol's Metal Flange accessories also known as nut plates come in both Mil-standard (M85049/94, /95, /96) and commercial options.  Metal flanges prevent loss of hardware inside the box and easy alignment during assembly.  High performing and easy to use, the Metal Flange product line include self-locking clinch nuts to ensure a positive lock every time they're used.
    More
  • Micro D & M24308 D sub backshell
    Micro D & M24308 D sub backshell
    Micro-D Aluminum backshells available in standard, EMI shield, strain relief elliptical entry. D-Sub Backshells are available in straight, side entry, 90° & 45°.
    More
  • Micro-D EMI Backshells
    Micro-D EMI Backshells
    The Amphenol Micro-D EMI backshell series MBS is designed for use with M83513 connectors. It is a reliable means of providing EMI and strain relief for harnessed connectors.
    More
  • Miniature Backshells
    Miniature Backshells
    Amphenol's Miniature Backshell product line support both backshells and caps for Amphenol's 2M circular connector line.  These high-performance metal backshells have strain relief, EMI, and environmental capabilities.
    More
  • Modular Pipe Clamps
    Modular Pipe Clamps
    These pipe clamps allow the perfect fixing of hydraulic pipes on structure. Multiple versions are available, including conducting version. They are closed and fixed on structure by screws.
    More
  • Non-Environmental Backshells
    Non-Environmental Backshells
    Amphenol's Non-Environmental Backshells have an effective heavy cable holding mechanism with good strain relief for applications that do not require environmental sealing. Amphenol offers cost-effective solutions by eliminating extra sealing parts. This type of Backshell is suitable for an inside-the-box/climate-controlled room application where heavy cabling should be supported with adequate strain relief.
    More
  • Non-Environmental EMI/RFI Backshells
    Non-Environmental EMI/RFI Backshells
    Amphenol's Non-Environmental EMI/RFI backshell offers reliable strain relief and heavy cable support while providing electromagnetic and radio frequency noise isolation shielding. It accommodates both individual and overall shielding. Available in straight, 90° and 45° varieties.
    More
  • Omega Clamps
    Omega Clamps
    Engineered for lean manufacturing, the high performance Omega Clamps were developed to replace and outperform traditional P-Clamps and Saddle Clamps. Featuring an overmold silicone cushion with PEEK polymer, our clamps are completely non-conductive/non-corrosive, lightweight, and very durable.
    More
  • P-Clamps
    P-Clamps
    Engineered for lean manufacturing, the high performance P-Clamps were developed to replace and outperform traditional P-Clamps and Saddle Clamps. Featuring an overmold silicone cushion with PEEK polymer, our clamps are completely non-conductive/non-corrosive, lightweight, and very durable.
    More
  • Power Feeder Spacers
    Power Feeder Spacers
    Spacers provide a constant spacing between the power feeder. The custom design of this product allows a six degree rotation on the power feeder bundle and doesn’t fight against the natural flow of the cable.  It is designed to sit within an Omega Clamp used as anchor points.
    More
  • Pre-Shield Adapters
    Pre-Shield Adapters
    Amphenol's Pre-Shield Adapter comes with a pre-cut braid that is fitted to the adapter for easy assembly. This braid overlaps with the cable braid and effective shielding takes place due to its 360° contact. It is designed to accept a heat shrink boot, is easy to use and saves time during cable termination.
    More
  • Protective Caps
    Protective Caps
    Protect your plugs and receptacles against dust, water, moisture, EMI and contact bending. We provide protective caps for 38999 Series I, II, III (MIL-DTL-38999/EN3645), PT/451 Series (MIL-DTL-26482) and RJ/USB Field connectors. Standard caps, snap caps, rubber caps and dummy receptacles available.
    More
  • Quick Clamps
    Quick Clamps
    A lightweight clamp used for securing and "tidying up" cables into a desired direction.  They are typically used in interior wiring of an aircraft and are good for applications not requiring environmental sealing.
    More
  • Raceways
    Raceways
    Designed to secure and guide wire bundles through aircraft, Amphenol's Raceways were designed for lean manufacturing.  Built in a one-piece, lightweight design with multiple fixing points, our raceways are strong, durable and make wire bundle installation and maintenance easy.  Our Harness Supports were developed to secure large bundles and high loads, while our Hat Supports were developed to support a wide range of load requirements.  Our Spacer Strips were designed to separate wire bundles a specific distance from one another, while our low-profile Tie-Down Strips secure bundles directly to the structure.
    More
  • Shrink Boot Adapters
    Shrink Boot Adapters
    A good solution when the unshielded cables are terminated with heat shrink boots. It has a groove where the boot lip can be held which provides good grip apart from sufficient space inside for the cable looping. Using the heat shrink boot is one way of providing environmental protection and strain relief to cable termination. Using a suitable adapter is essential to ensure the reparability.
    More
  • SIM Module Protective Caps
    SIM Module Protective Caps
    This protective cap was designed to protect EN4165 / SIM modules from risks of damages during transportation: dust, moisture, pin contacts bending… For both male and female modules.
    More
  • SilverLine LPA Low PIM Adapters
    SilverLine LPA Low PIM Adapters
    SilverLine®-LPA low PIM adapters exhibit exceptional PIM performance in any cellular or wireless frequency range. Times Microwave uses the most robust designs for long product life regardless of the environment. All product is 100% tested and individually packaged prior to shipping.
    More
  • SQ Adapters
    SQ Adapters
    Amphenol's SQ Adapter is a cost-effective product to terminate the braid to the adapter. The braid is pulled over the conical shape to the rear end of the adapter and tied. The end nut is tightened to ensure adequate grip for the shielding. A heat shrink boot can be used with this adapter as well.
    More
  • Standoffs
    Standoffs
    Designed to help guide wire bundles through aircraft, Amphenol's high performance Standoffs were designed with strength, stability, and weight reduction in mind. Our Standoffs are made with PEEK— a very strong, non-conductive/non-corrosive, and lightweight material - designed to replace heavier aluminum. They come with a locking feature for security, are designed with ribs to provide additional strength, and support a wide range of clamp sizes and raceways for added convenience.
    More
  • Strain Relief Clamps
    Strain Relief Clamps
    Amphenol's Strain Relief Clamps not only tidy-up the cable after termination, but also provide good strain relief at the termination area. It is a cost-effective cable holding option when environmental protection is not a concern, and weight saving is a major consideration.
    More
  • VG95319-1011 Backshells
    VG95319-1011 Backshells
    Backshells are available in various versions. Band adapter, double cone adapter, individual adapter, molded adapter, adapter with strain release shells for D38999 serie III. We offer a complete series of backshells for aerospace and military applications.
    More
  • Wiring Accessories
    Wiring Accessories
    Designed to secure and guide wire bundles throughout an aircraft, AirLBF’s wiring accessories were designed with strength, stability, and weight reduction in mind. They come with a large variety of sizes, shapes and materials. They are able to support large bundles and high stress requirements.
    More
Contact Form
Send