Products

Rectangular & Board Level Connectors Filtre

Rectangular & Board Level Connectors

  • The 127 series is a medium-density range of multi-contact plug-in connectors for printed circuit boards. This range of 2.54[.100] staggered grid, low profile connectors meets the common harsh environmental requirements. A wide range of fittings and guides, as well as numerous contact terminations, provide more flexibility to PCB designers.
    More
  • Amphenol’s Filtered D-subminiature connectors for high reliability applications uses a stress-isolated design without incorporating solder to allow for the rugged transfer of shock and vibration waveforms without damage to the filter elements. All sizes and termination styles are available with short lead times to meet the military and commercial aviation markets.
    More
  • Amphenol Tactical Communication (ATC) connectors and cable assemblies are designed to interface with the AN/PRC-117G and AN/PRC-152 military radio 32 pin data connector. These connectors are used to interface with ruggedized laptops, Intercom systems and FBCB2. ATC connectors are available as field installable connector kits and as factory assembled molded cable assemblies. The ATC connectors are designed to be used in harsh environment applications and feature a rugged, watertight two (2) piece metal shell design. The design includes enhanced EMI-shielding capabilities to insure the superior performance that you would expect from Amphenol.
    More
  • SV’s complete line of coaxial PCB connectors meet the industry need for high-performing, easy-to-use compact designs. Current configurations include single-port and multiport 2.92mm, 2.4mm, SMA, SMP, SMPM and SMPS edge launch, board mount and thru-hole connectors. SV Microwave’s PCB connector designs are ideal for high density applications, while allowing for axial and radial misalignment to compensate for tolerance stack up. Get custom PCB footprint designs to optimize connector to PCB transitions.
    More
  • Amphenol Socapex's versitile HDAS board to board connector offers a wide range of contact types and arrangements. HDAS is used in more than 10 civil & military aircraft programs. HDAS is a high-density connector dedicated to harsh environments.
    More
  • This connector series incorporates a higher density contact pattern and lower mated height than Amphenol’s standard low mating force rectangular connectors. HDB3 connectors utilize the same durable and reliable B3 brush contact in a tighter .070” X .060” staggered grid pattern.
    More
  • Designed for a space conscious industry. Provides an extremely dense and reliable interconnection for card-to-card and card-to-cable applications.
    More
  • Amphenol’s M13 connector series is a range of filtered MIL-DTL-83513 Micro-D products for military and aerospace applications. These extremely small filter connectors employ monolithic planar capacitors in a rugged, high density package ideally suited for applications where space and weight is restricted. Available in a variety of filter types and mechanical configurations including wired harnesses and PCB terminations. The M13 series are fully intermateable with all standard MIL-DTL-83513 connectors and meet the applicable performance and environmental requirements.
    More
  • Micro HDAS is the 1.27mm pitch connector based on existing HDAS technology. Smaller, lighter, and just as strong, this miniature connector is used in board to board or board to cable applications. Offering a crimp version, Micro HDAS can be used in harnesses from panel to board when used with an I/O 38999 connector.
    More
  • Amphenol Micro-D provide small interconnect solutions, which will exceed the requirements of the US military standard M83513. What differentiates Amphenol from the competition is our overall connector design. Custom solutions can easily be engineered to ensure exact performance in any application. Amphenol is not limited to the traditional M83513 rectangular connectors but has also developed and produced circular connectors, strip line connectors, PC board connectors, and hybrid connectors utilizing power, signal, coaxial and fiber optics contacts.
    More
  • MMA combines many of the best features from popular product lines including ARINC 600's power, RF, Fiber Optic and Quadrax contacts, low mating forces and shrouded size 22 pins. Sealing capabilities are comparable to M83527 with a shell seal, face seal, and grommet. Modular, removable inserts are effective for separating signal and power contacts, while providing ease of installation and customization in the field. Choose our 360° EMI spring option if shielding effectiveness is a concern. Customer specific designs lead to endless possibilities.
    More
  • SV's collection of pre-tinned coaxial PCB connectors include surface mount, thru hole and edge launch connectors. These connectors are denoted with a “-TD”. Additionally, SV Microwave also offers custom PCB footprint design services, enabling the optimization of connector to PCB transitions through software simulation.
    More
  • MIL-DTL-83527 is a rack and panel blind mate series designed for the rugged applications found mostly in military applications. Amphenol’s filtered MIL-DTL-83527 series is intermateable and interchangeable with all non-filtered versions of the same specification. This series has numerous insert arrangements to house signal, high speed RF, Twinax and quadrax Ethernet lines. These can be combined with filter and EMP requirements to support our customer applications.
    More
  • The R38 series is a hybrid connector using signal contacts and high speed contacts in a small rectangular package. The signal contacts can be either 23ga for micro D or 22ga for D-subminiature versions depending on the current required. The high speed contacts are typically size 8 or 12 for RF Coax, Concentric Twinax, Differential Twinax, Quadrax, Octonet and Fiber optics. The arrangements are varied and Amphenol will design to suit your needs, many are available now.
    More
  • The R39 provides high performance in the severe environment demands of military specifications. Its lower profile translates into a smaller space-saving footprint and the new rectangular orientation provides additional installation options. It’s also available in a high density, 127-pin contact version providing a wider range of engineering applications. It delivers the same reliable, familiar benefits found in our 38999 connector: effortless installation; blind push pull mating; extreme durability; quick mate and; “scoop-proof” recessed pin design. Using the same wide range of contacts, and the crimp and insert/removal tooling as 38999, it delivers just a little more.
    More
  • The Rugged R-SATA style connector is perfectly suited as the primary internal storage interconnect for desktop and mobile PCs, connecting the system to peripherals such as hard drives, solid state drives, optical drives, and removable magnetic media drives. The R-SATA supports SATA 3.0 protocol, delivering 6.25 Gb/s data rates & beyond. Amphenol’s R-SATA connector utilizes a Micro-Hyperboloid contact with proven performance. The Micro-Hyperboloid contact system offers low insertion and extraction forces, high durability counts and is resistant to shock, vibration and fretting corrosion.
    More
  • The SD308 series of D-Subminiature connectors is designed specifically for applications where advanced sealing is required. These connectors have unique sealed bodies and blind inserts to meet stringent immersions requirements. Along with these sealing techniques, a special flange to incorporate a sealing gasket can provide additional sealing from connector to chassis.
    More
  • SIAL is a modular interconnection system that has the capability to mix signal and coax contacts. The contact technology allows the use of thermal clamps. With 3 sizes of modules, the SIAL connectors provide the arrangement needed, from 18 to 392 contacts. In a staggered grid pattern, this connector houses 5 rows of contacts in a low profile board to board format. Additionally, SIAL connectors provide shielding on both plug & receptacle, which allows the dissipation of all the electrical charge while mating.
    More
  • The SIHD connector combines excellent electrical performances with high contact density within a robust housing, which can withstand extreme environmental conditions. In addition, the lateral displacement capability allows the use of thermal clamps for heat management, as well as a more relaxed positional tolerance on the backplane.
    More
  • The SMASH offers high robustness where signal integrity is required. Based on an aluminium shell with 1, 2 or 3 bays, the SMASH can house up to 450 contacts. The chevron grid pattern (1.905 x 1.905 [.075 x .75]) provides high contact density for advanced electronics packaging. The shell is equipped with grounding, guide pins, and keying devices to ensure mechanical reliability.
    More
  • SOLARIS is a small, plastic, easy-to-use rectangular connector designed specifically for low and medium power applications. Solaris’ spring-loaded slide lock mechanism is easy to use - push to lock and slide to unlock. The slide lock provides single handed & tool-less mating, eliminating the Foreign Object Debris (FOD), found in typical screw mount D-Subs. Each housing has raised finger ridges for a sure grip, and built-in cable tie access hole provides a “zero footprint” method to secure the connector to a bulkhead or cable bundle.
    More
  • Micro-D style connectors with .050” contact spacing
    More
Contact Form