1. Home
  2. Products
Filtre

RF Interconnects

  • 1.85MM Series
    1.85MM Series
    The 1.85mm connector was designed for mode free operation through 65 GHz. The interface uses a mostly air-dielectric with a support bead that is set back in the body of the connector to reduce bead interaction in a mated pair. Like the 2.92mm and 2.4mm connector, the body has been designed to ensure that the outer conductors engage before the center conductors make contact. The 1.85mm interface uses an M7 thread and is compatible only with the 2.4mm interface. SV Microwave supplies adapters to mate 1.85mm connectors to SMA and 2.92mm connectors.
    More
  • Advantage No-Braid Trim Connectors
    Advantage No-Braid Trim Connectors
    No-Braid-Trim-X series of connectors feature a termination process that does not require trimming of the braid shield thereby facilitating the cable termination procedure and reducing the time required to terminate the cable. Cable can be stripped using CSTtype LMR® cable stripping tool. Combination hex/knurl coupling nut allows tightening by hand or with a wrench. Chamfered cable entry hole for ease of termination.
    More
  • Blind Mate Antenna Solutions
    Blind Mate Antenna Solutions
    Enables design engineers to convert most existing RF antennas into Blind mate "plug in and forget" quick release antennas, which can be quickly installed and removed from platforms without having to connect or disconnect the coaxial cable. By simply adding a screw-on alignment sleeve, an existing antenna is converted into a plug in device. The interconnecting coaxial connector is fitted with a mating MNC connector which is permanently attached to the aircraft structure via a spring loaded receiver sleeve
    More
  • BMA Series
    BMA Series
    Government designation BMA (Blindmate A) was developed in the 1980's. The originally designated OSP™ connector by M/A-Com has excellent electrical performance up to 22 GHz in a compact size. SV Microwave offers extended frequencies on most BMA connector designs up to 26.5 GHz. With a slide-on interface and a connector durability of 5000 cycles, the BMA blindmate is suitable for high performance microwave applications.
    More
  • BMMA Series
    BMMA Series
    BMMA connector is a subminiature version of the BMA blindmate series. This originally designated OSSP™ connector by M/A-Com has excellent electrical performance at high frequencies up to 28 GHz. There is a complete family of BMMA blindmate connectors and adapters. BMMA connectors are approximately 25% smaller than the BMAs, and are used for applications where space is limited and no special tooling is required.
    More
  • BMZ Series
    BMZ Series
    The BMZ is government designation (Blindmate Z). This connector has low insertion forces and a light spring which allow for high density applications. The BMZ is a miniaturized version of the BZ, a high-frequency connector with slide-on mating. This blindmate has a frequency range of DC-18 GHz and 50 ohms impedance with an interface controlled by MIL-STD-348.
    More
  • BNC Series
    BNC Series
    Developed as a miniature version of the Type C connector, the BNC connector is a miniature quick mating and de-mating RF connector. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. SV Microwave's 50 Ohms BNC series connectors are miniature and lightweight. They are designed to operate at a frequency of DC to 11 GHz and typically yield low reflection through 4 GHz.
    More
  • BZ Series
    BZ Series
    The BZ connector is a high-power blindmate connector with slide-on mating. This originally designated PMA blindmate by Automatic has PTFE dielectric interface, telescoping insulators and wiping outer contacts. BZ blindmate connector applications include GPS navigation systems and antenna connections. The BZ blindmate connector is a mechanically ruggedized blindmate and can handle 6.7 KW to 2 GHz.
    More
  • Compression Mount RF Connectors
    Compression Mount RF Connectors
    SV Microwave manufactures a large variety of solderless precision RF connectors in high frequency bands including the mmWave frequencies. SV offers a variety of cost effective coaxial PCB mount SMA, 2.92mm and 2.4mm connector series. Our solderless application makes assembly fast, easy and without damaging the PCB board. Additionally, SV can customize a PCB footprint design for your application using our latest simulation technology. SV’s line of compression mount coax connectors are available in stripline and CPW/Microstrip options and are ideal for mobile communications (including 4G & 5G applications), wireless test and measurement, high speed digital environments, and much more.
    More
  • M3933/30 Attenuators
    M3933/30 Attenuators
    SV Microwave is the ONLY DLA approved source for these 2.92mm attenuators (DC through 32 GHz). SV's line has the precision, quality and performance unmatched in the marketplace . Our dB values range from 0.5 to 30 dB with low VSWR and flat attenuation. Available in screened and non-screened versions.
    More
  • Millimeter Wave Connectors, Cable Assemblies, Components and Adapters
    Millimeter Wave Connectors, Cable Assemblies, Components and Adapters
    SV Microwave's high frequency millimeter wave product line has the precision, quality and performance needed for the millimeter wave spectrum through 67 GHz. Products include 2.92 mm, 2.4 mm and 1.85 mm and are available as connectors, terminations, attenuators, cable assemblies and customized solutions. These parts are ideal for applications requiring high frequency transmission in the high speed digital, test and measurement, instrumentation and SATCOM markets.
    More
  • Mil-Spec RF Connectors, Adapters and Components
    Mil-Spec RF Connectors, Adapters and Components
    SV has the most extensive RF connector MIL-SPEC offering. We have a long history of supporting DLA and promoting the standardization of RF connectors and components.
    More
  • Multiport Connectors
    Multiport Connectors
    SV offers a wide range of multiport connectors and cable assemblies. SV's precision and expertise enables our ability to manufacture high-density, high performance multiport connectors. Custom and COTS parts are available.
    More
  • Multiport High Density Connectors
    Multiport High Density Connectors
    High Density Interfaces provide connectivity and maintainability with quick mate/de-mate of multiple cable assemblies. High performance M8 Multi-Port, Mini-Multi-Port (MMP) and BMB 38999 contacts fit standard and custom connector shell designs and provide broadband performance up to 40 GHz. These High Density Interconnect products have been developed to provide extended life and full performance in harsh environments. Sealing features are built into the contact interfaces and connector shells, providing redundant assurance of long-term performance in fielded systems that make them very popular in the military aerospace market.
    More
  • PN Series
    PN Series
    The PN is SV Microwave’s precision version of the type N which offers the user superior electrical characteristics. This series is constructed in stainless steel passivated or gold plated. The PN series meets or exceeds all parameters of MIL- PRE- 39012 Type N connectors designed to this military specification.
    More
  • PTNC Series
    PTNC Series
    The PTNC connector is SV Microwave's precision version of the TNC and offers the user superior electrical characteristics. With a frequency range of DC to 15 GHz and tighter machine tolerances, the PTNC series is used in applications such as telecom, base stations, radars, and antennas. The PTNC has a threaded coupling interface, which ensures the connector will not de-couple in vibration-intensive applications.
    More
  • RF
    RF

    RF

    More
  • RF DC Block Lightning Protector
    RF DC Block Lightning Protector
    The LP-WBX-N high performance series uses a filter circuit to provide exceptional lightning protection over the 2000-6000MHz frequency band, covering both the unlicensed WiFi bands and several licensed operating bands. Unlike competitive protectors, the white bronze plated construction of the LP-WBX-N series eliminates potential galvanic corrosion issues and provides long life in hostile environments. The fully weatherized housing is sealed to IP65 allowing for outdoor as well as indoor installation.
    More
  • RF DC Pass Lightning Protection
    RF DC Pass Lightning Protection
    The Times-Protect® LP-GTV-N series is an exceptional broadband DC pass design for lightning protection applications requiring DC power to be supplied to the electronics. These devices exhibit outstanding RF performance with high surge current handling characteristics and cover a broad range of applications requiring up to 150W of RF power handling. Its fully weatherized housing meeting IP67 standard allows for outdoor as well as indoor installation. The N connector designs cover the entire frequency spectrum from DC through 7000MHz.
    More
  • Secure Locking SMP/SMPM Series
    Secure Locking SMP/SMPM Series
    SV Microwave’s QuarterBack® connector line utilizes a quarter turn bayonet style coupling nut with a locking feature for standard SMP/SMPM interfaces. These connectors are ideal for high vibration and test applications that require a large number of mating cycles.
    More
  • SilverLine XF (Extra Flex)
    SilverLine XF (Extra Flex)
    SilverLine®-XF was designed for testing delicate components such as exposed RF circuits with edge launch connectors. Thin, lightweight and flexible this coax makes handling PC boards easy yet does not compromise RF stability and isolation. Using Times' proprietary TF-4 dielectric SilverLine®-XF goes one step further, exhibiting linear phase change from 0ºC to +30ºC.
    More
  • SMA Series
    SMA Series
    SMA is an acronym for SubMiniature version A. Using a threaded interface, 50 Ohm SMA connectors are precision subminiature units that provide excellent electrical performance from DC to 26.5 GHz. These high-performance connectors are compact in size and mechanically have outstanding durability. Built in accordance with MIL-PRF-39012 and CECC 22110/111, SMA connectors can be mated with all connectors that meet these spec mating diameters regardless of manufacturer.
    More
  • SMP Connectors
    SMP Connectors
    SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The SMP connector was developed to meet an industry need for a smaller high frequency compact design that incorporated ease of use and functionality. The SMP bullet is the heart of this unique design.
    More
  • SMPM Series
    SMPM Series
    SV Microwave offers a complete line of SMPM connectors.  The SMPM connector was developed to improve on the application density and operating frequency range of the SMP connector.  The SMPM connector is widely used in high density, high performance applications today.
    More
  • SMPS Series
    SMPS Series
    SV's SMPS design is capable of frequencies exceeding 100 GHz. Being 45% smaller than the SMP and 30% smaller then the SMPM, the SMPS is ideal for dense packaging in multiport applications. The SMPS also has a low interface height making it an excellent choice for board-to-board applications using a bullet design. Current configurations include male and female cable connectors, board mount, edge launch and the female bullet. The male interface is available in smooth bore for easy mating or detent for female retention. Directly compatible with the G3PO interface, the SMPS has low VSWR of 1.12 to 50 GHz for the female bullet while allowing for .010” of radial and axial misalignment. The smooth bore design will mate and demate a minimum of 500 cycles and the detent design is capable of 100 cycles minimum.
    More
  • Terminations
    Terminations
    Terminations are used to prevent an RF signal from being reflected back from the end, causing interference. SV offers a broad range of terminations in SMA, 2.92mm, 2.4mm, 1.85mm, SMP, SMPM & SMPS series.
    More
  • TNC Series
    TNC Series
    Designed as a threaded version of the BNC, the TNC series features screw threads for mating. TNC are miniature, threaded weatherproof units with a constant impedance of 50 Ohms and operate at DC to 11 GHz. As a ruggedized version of the BNC, the TNC features a threaded coupling that offers extra mating stability. TNC connectors are used in many applications including Mil-Aero, instrumentation, and cable assemblies.
    More
  • Type N Series
    Type N Series
    The Type N connector was developed to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz.
    More
  • VITA 67
    VITA 67
    SV’s unique connector retention mechanism makes assembly/disassembly a lot easier than competition. The floating SMPM coaxial contacts ensure excellent RF performance in any mating condition. These parts are also designed for side-by-side implementation with VITA 46 hardware and can be cabled to Ø.086 and smaller coaxial cable types. Rear panel interface enables quick disconnect & replacement of card, leading to a significant reduction in Mean-Time-To-Repair (MTTR) when compared to front panel interfaces. Customized configurations available for 67.3 and Commercial Off-The-Shelf (COTS) versions available for 67.1 & 67.2. Go to SV’s Product Search finder on their website to find connectors readily available in distribution.
    More
  • Wedge TNC
    Wedge TNC
    SV Microwave manufactures high performance Wedge TNC connectors that incorporate a unique tapered dielectric design. This distinctive design allows the mating connectors’ dielectrics to physically overlap which effectively minimizes air gaps and generates a longer voltage path for improved voltage breakdown. The Wedge TNC allows for outstanding passive intermodulation (PIM) performance due to the tapered dielectric design feature and the tri-alloy plated brass connector body.
    More
  • ZMA Series
    ZMA Series
    The ZMA connector is a bayonet coupling device. The unique design of this connector provides a high coupling force, which is ideal for extreme vibration applications where insufficient room is available for spring loaded blindmate panels. The ZMA is a quarter-turn coaxial connector that can be mated by hand so that special tooling is not required for proper installation. There are 8 keying arrangements are available to prevent improper mating of assemblies in blind installations. The ZMA connector is designed with electrical performance of 18 GHz, overlapping PTFE dielectrics, and rugged stainless steel body construction appropriate for military applications.
    More
  • DCWG SB Directional Coupler
    DCWG SB Directional Coupler
    The DCWG 1.2 GHz Series of high quality directional couplers have been developed to meet the rigorous requirements of MDU distribution. The solder-back design, high return loss and low insertion loss make the DCWG-SB Series ideal for any RF distribution application. Advanced PCB design assures consistent performance. The available tap values for the DCWG-SB series include: 4, 6, 9, 12, 16, 20, 24, 27, 30 dB.

    These couplers manage RF distribution over varied COAX run lengths with varied power requirements in homes, MDU’s and businesses
    More
  • Digital Directional Couplers - BDC Series
    Digital Directional Couplers - BDC Series
    The BDC digital directional coupler line has led the broadband / CATV in quality and design for over a decade. Weather sealing, environmental protection, mounting options and superior electrical RF performance quickly made the BDC series the industry standard for Broadband Directional Couplers. Available in a multitude of configurations, losses and housing styles.
    More
  • Digital Splitter - BDS102H
    Digital Splitter - BDS102H
    The BDS102H digital splitter line has led the broadband / CATV in quality and design for over a decade. Weather sealing, environmental protection, mounting options and superior electrical RF performance quickly made the BDS100 series the industry standard for Broadband Splitters.
    More
  • DOCSIS Passive
    DOCSIS Passive
    The DOCSIS Passive is the next generation home networking gateway device allowing 100% passive broadband installation with nearly unlimited outlet potential. A preferred alternative to active in the home, this device can accommodate multiple STB's and MoCA Controllers without power supplies or signal amplification. This technology reduces installation costs, dramatically improves reliability and increases system performance by eliminating noise, ingress and egress.
    More
  • Drop Cable
    Drop Cable
    A premier manufacturer of drop coaxial cables since 1948. Series 59, 6, and 11 products are used throughout the premises in today’s HFC networks. These products meet all industry standards, including ANSI / SCTE 74 2003, Specification for Braided 75 Ohm Flexible Coaxial Drop Cables. Available for indoor-premise, general purpose, aerial self-support, and burial applications. Times Fiber Communications’ innovations have improved the quality and reliability of the installation, therefore improving customer satisfaction. All TFC drop products are UV stable and resistant to extreme temperature variations. Do not trust the last portion of the last mile to any other cable but TFC's.
    More
  • Fixed Length Cable Assemblies
    Fixed Length Cable Assemblies
    Amphenol RF offers a full line of pre-assembled, fixed-length cable assemblies. Fixed length assemblies are offered in all of our most popular connector series and are available in over 1400 standard configurations and lengths.
    More
  • F-Type Product Series
    F-Type Product Series
    The F-Type connector series is a high performance, cost competitive threaded connector series. Primary applications of the F-Type connectors are for cable television (CATV), set-top boxes and cable modems.
    More
  • G-PF-59 Precision Push-On F-Adaptor
    G-PF-59 Precision Push-On F-Adaptor
    The G-PF-59 is a lab-grade, high-performance push-on F-connector adapter. The G-PF-59 has been specifically designed for high-volume testing environments demanding production efficiency, durability and reliability. This adapter utilizes precision specifications, and a special high-cycle, low-tension ground spring, allowing for low insertion force and high volume testing throughput. The G-PF-59 is particularly volume effective with high-density adapter fixtures. In addition, a high-strength center conductor is used to ensure high-cycle life expectancy.
    More
  • G-Type Product Series
    G-Type Product Series
    The G-Type product series are a 75 Ω series with performance up to 1 GHz. It is ideal for cable television (CATV), set top boxes and cable modems.
    More
  • Hardline Cable
    Hardline Cable
    A premier manufacturer for coaxial cables for the telecommunications industries. Our product profile provides designs for specialized applications needing single coaxial and multi-coaxial cables in various sizes, combinations, and specifications for telecommunications as well as the radio, video, TV and information industries.

    The T10-TX10 Hardline cable line is a seamless extruded tube. TFC’s T10-TX10 cable will outlast the standard welded tube cables. This cable is designed to eliminate pinhole leaks and microcracking. This cable line can be used with all the coring tools and connectors
    More
  • HFS-x & HFS-xD Splitters
    HFS-x & HFS-xD Splitters
    Broadband Satellite Splitters
    The HFS Series broadband splitters are an advanced design providing the lowest insertion loss from 5-2150 MHz while maintaining high isolation. The HFS-2 / HFS-4 power pass to one port and the HFS-2P / HFS-4P pass power to all ports.

    The HFS-*D series high-frequency splitters have been designed with diode steered circuitry, which allows the DC power to pass from any output port to the input port and prevents DC backfeeding.
    More
  • IPA1000 Series Premises Amplifier
    IPA1000 Series Premises Amplifier
    Welcome to the IPA1000 series premises amplifier, the one that started the revolution. The first of its kind to provide an integrated solution with passive and active ports, this device drove the "Home Run" installation standard practiced by nearly every CATV operator in the United States. For over a decade, this premies amplifier has lead the industry in quality, features and cost, becoming a staple of the broadband industry.
    More
  • MCX Product Series
    MCX Product Series
    The MCX (Micro Coaxial) series is a great option where weight and physical space are limited. The MCX provides broadband capability through 6 GHz in a snap-on connector design. A range of connectors are available, including printed circuit board and cable connectors. Typical applications include automotive, wireless LAN, broadband and wireless infrastructure markets. MCX connectors conform to the European CECC 22000 spec.
    More
  • Mini-SMB Product Series
    Mini-SMB Product Series
    Amphenol's Mini-SMB 75 Ohm product series provides broadband capability through 2 GHz. Its snap-on design offers a quick connect/disconnect and utilizes die cast components in non-critical areas to provide a low-cost solution.
    More
  • Mini-UHF Product Series
    Mini-UHF Product Series
    Mini-UHF is a miniature version of the UHF connectors that were developed for use in the radio industry. Mini-UHF connectors are designed as coaxial interconnects for applications where size, weight, and cost factors are critical. With a miniature 3/8-24 thread size, these connectors provide excellent RF performance for applications up to 2.5 GHz. Mini-UHF connectors terminate to RG-58, RG-58A, RG-58B, RG-58C, and Belden 9258 cables. Crimp-type cable plugs and jacks are available as well as panel and PCB receptacles.
    More
  • MMCX Product Series
    MMCX Product Series
    The MMCX (Micro-Miniature Coaxial) product series is a micro-miniature version of the MCX. It has the all features of the MCX series, including 50 Ω impedance with a broadband capability of DC to 6 GHz and secure, fast and easy snap-on/ snap-off coupling, and a wide range of available connectors. However, MMCX connectors have a smaller footprint than the MCX series.

    MMCX is a micro-miniature connector series with a fast and easy snap-lock mechanism allowing for 360-degree rotation. MMCX connectors conform to the European CECC 22000 specification. These 50 Ω connectors offer all of the same features of theMCX series with broadband capability of DC to 6 GHz. A range of connectors is available including surface mount, edge card, and cable connectors. Common applications include broadband, instrumentation and telecommunications.
    More
  • MoCA Amplifier
    MoCA Amplifier
    The IPA2000 Series MoCA Amplifiers are designed to maximize the MoCA frequencies within the premises while optimizing the RF band simultaneously. Completely redesigned with innovate features such as Data Stabilization, CrossTalk, and DataComm, the IPA2000 series has become the new standard in CATV amplification.

    This IPA2008DSL-RSVF has 8 active outputs and 1 passive data port.
    More
  • MoCA Filter POE-F201C
    MoCA Filter POE-F201C
    The POE-F201C MoCA filter combines superior surge protection in a compact housing to be utilized a the point of entry or beyond legacy equipment in the home. Not only does the POE-F201C come in an in-line barrel housing, this MoCA filter can be integrated into nearly every premises device in the ABS product line including ground blocks, splitters, amplifiers, and gateway devices.
    More
  • Protective Caps - RF
    Protective Caps - RF
    Protective caps are available for many of our products, with options for chains and mounting hardware.
    More
  • QMA Product Series
    QMA Product Series
    The QMA is a quick disconnect version of the SMA connector. The electrical performance of the QMA includes low loss RF performance up to 18 GHz. The QMA connector offers the same high power handling capability as the SMA connector it is based on.
    More
  • QN Connectors
    QN Connectors
    Amphenol RF’s QN connector is a quick disconnect version of the N-Type connector with similar internal construction, which enables fast and easy matings with minimum space requirements. The snap-on interface makes the QN connector 10 times faster than a threaded connector. Common applications include base atations and cable assemblies.
    More
  • Semiflex Trunk & Distribution Cable
    Semiflex Trunk & Distribution Cable
    The low D.C. loop resistance of T10 and TX10 cable results in lower installation and annual power costs. These cables are ideal for urban and coastal environments, feeder or underground applications, and resistant to extensive mechanical abuse and rodent attack. These cables have a specified 1 Ghz bandwidth for all rebuilds, upgrades, or new plants, and allows a system to handle future demands.
    More
  • ShieldX® Coaxial Drop Cable
    ShieldX® Coaxial Drop Cable
    ShieldX® coax cable solution, helps solve shielding issues by providing a TriShield cable with enhanced shielding offering the following benefits:
    • QuadShield Performance in a TriShield Design
    • Technician Friendly Prep Utilizing the QuickPrep Bonded Foil Design Adopted as an Industry Standard
    • Enhanced Transfer Impedance Prior to Flexure
    • Improved Screening Attenuation Performance Prior to Flexure
    More
  • SMB Product Series
    SMB Product Series
    Developed in the 1960's, the SMB (sub-miniature) interface features a snap-on coupling mechanism and is available in 50 Ohm and 75 Ohm configurations. SMB products offer broadband performance with low reflection DC to 10 GHz and utilize die cast components on non-critical areas to provide a low-cost solution. Amphenol RF's SMB connectors conform to the requirements of MIL-C-39012, and the interface is in compliance with MIL-STD-348.
    More
  • SMC Product Series
    SMC Product Series
    The SMC interface features threaded coupling with 10-32 threads and is available in 50 and 75 Ohm configurations. SMC connectors offer broadband performance with low reflection DC to 10 GHz and are primarily used in telecommunications and instrumentation applications.
    More
  • SMZ Connectors
    SMZ Connectors
    SMZ connectors feature the 75 Ohm impedance and are ideal for instrumentation applications.
    More
  • Tech Bag 2
    Tech Bag 2
    The Tech Service Bag II for broadband and CATV installers. Designed with an array of features, the Tech Service Bag II is also environmentally friendly using a reusable reel and flange, eliminating cardboard and plastic waste. It’s sturdy and water resistant body features a reinforced bottom capable of maintaining it’s shape and performing as a true technician assistant. Capable of holding a 500 ft reel on plastic flange, the coil can be changed quickly and easily. Cable reels pay off with an easy and fluid feel due to the unique side support design system preventing cable tangle, jams and reel lock. Built in pouches are great for extra storage to hold tools, connectors and even includes a padded slot for an iPad or tablet. The TFC Tech Service Bag II is designed for the active cable technician by eliminating extra trips to the truck, creating accurate drop lengths, eliminating waste and providing a comfortable accessory to carry tools and equipment.
    More
  • TNC Product Series
    TNC Product Series
    Developed in the late 1950s, the TNC stands for Threaded Neill Concelman and is named after Amphenol engineer Carl Concelman. Designed as a threaded version of the BNC, the TNC connector series features screw threads for mating. TNC connectors are miniature, threaded weatherproof series with a constant 50 Ω impedance and a frequency range of DC - 11 GHz. There are two types of TNC connectors: Standard and Reverse Polarity.
    More
  • UHF Product Series
    UHF Product Series
    Originally intended for use as a video connector in radar applications, UHF coaxial connectors are general purpose units developed for use in low-frequency systems from 0.6 - 300 MHz.
    More
  • Universal MCV Compression Connectors
    Universal MCV Compression Connectors
    MCV™ Series 59 & 6 Connectors
    Holland Electronic’s new universal compression connectors were created with the commercial AV installers’ needs in mind. This series consists of five Universal Connectors that terminate most major brands of cable, including Plenum RG-6, RG-6, RG-59, Mini-23 AWG and Mini 25 AWG cables.

    FITS MOST MAJOR COAXIAL CABLE BRANDS
    Plenum RG-6, RG-6, RG-59, Mini 23 & Mini 25 - Our new MCV Universal Compression Connectors fit a wide variety of coaxial cables that vary in size between manufacturers. Some differences often include thickness of jacket or diameter of insulation depending on variance in materials used in the cable manufacturing process.
    More
  • RF cable assembly MHC-261
    RF cable assembly MHC-261
    RF cable assembly MHC-261
    More
  • RF cable assembly MHC-271
    RF cable assembly MHC-271
    RF cable assembly MHC-271
    More
  • RF Jumper & Socket
    RF Jumper & Socket
    Amphenol’s RF Jumper and Socket covers 1st through 5th generations. The 4th generation RF jumper cable is compatible with lpex spec using a soldering connection instead of crimping between RF connector and the jumper cable creating a more secure joint for better high frequency performance.
    The 5th generation version is Hirose compatible, and has a 1.0 mm mating height with 0.81 mm diameter cable. For high volume production, Amphenol provides fully automated manufacturing processes for both receptacle and jumper.
    More
  • MilTech®
    MilTech®
    Times Microwave produces sealed, flexible RF and microwave transmission line assemblies optimized for military environments. These cables exhibit an extremely long life in the rigorous environments found in airborne, shipboard and ground based applications. MilTech® cables are hermetically sealed and incorporate intermediate sections compatible with an assortment of connector systems.
    More
  • RF receptacle connector MHC-260
    RF receptacle connector MHC-260
    623-26000-69212
    More
  • RF receptacle connector MHC-270
    RF receptacle connector MHC-270
    653-27000-1000
    More
  • RF Switches
    RF Switches
    Amphenol’s full range of RF switches come in straight and right angle mountings as well as miniature, low-profile, and lightweight versions for different phone design requirements. Our full mechanical switches provide high reliability for wireless terminal testing and connection to external car antennas of up to 5Ghz.
    More
  • FAKRA Product Series
    FAKRA Product Series
    FAKRA products are embedded within a plastic housing which features multiple color codes for easy identification and unique keying to prevent mismating, FAKRA connectors are designed to perform up to 3 GHz and meet the particular mechanical and environmental requirements of the automotive industry.
    More
  • HSD Connectors
    HSD Connectors
    HSD interconnect products focus on various application areas in the automobile, such as the inside compartment for connections to displays, head units and rear seat infotainment modules.
    More
  • LMR® Cable
    LMR® Cable
    LMR cables are high performance coaxial communications cables designed for use in virtually all wireless system applications. The cables are more flexible than corrugated cables and exhibit much lower loss than traditional RG cables. Additional LMR products include high performance connectors in popular interfaces, prep tools, installation tools and accessories.
    More
  • LMR® Cable Installation Tools
    LMR® Cable Installation Tools
    Times Microwave Systems offers a complete line of rugged, specially designed custom cable prep tools. These tools are designed to eliminate or minimize many of the mechanical and electrical variables that play a part in the connector attachment process. In addition to providing much desired control in the field connector attachment process, they offer a considerable time savings and are much safer to use than traditional cable prepping.
    More
  • LMR® EZ Style Connectors
    LMR® EZ Style Connectors
    Times Microwave is the leader in providing high quality EZ style connectors. These non-solder type connectors use silver or gold plated beryllium copper spring contacts for optimal cable contact and offer considerable time savings, increased performance and more reliability than traditional solder-pin connectors. Most of our EZ connectors are available in an "X" version - no braid trim required.
    More
  • 4.3/10 Product Series
    4.3/10 Product Series
    Amphenol RF offers a full range of 4.3-10 connectors and adapters, which are engineered for the wireless market and are ideal for applications requiring low passive intermodulation, or PIM.
    More
  • 7/16 Product Series
    7/16 Product Series
    The 7/16 series provides superior performance for both return loss and intermodulation distortion (IMD). These connectors are very robust, extremely stable and mostly with waterproof specifications, making them ideal for applications where vibration resistance and environmental protection is important.
    More
  • AMC Product Series
    AMC Product Series
    The AMC series has a low profile (2.5 mm off the board) and offers an extremely small board footprint (3 mm x 3 mm).Their snap-on interface performs superbly under shock and vibration conditions, making them ideal for wireless handheld devices. This series is used in applications with 50 Ω impedance requirements and has a performance from DC to 6 GHz. Amphenol RF's AMC cable assemblies are ideal for space-constrained board-to-board connections in small devices.
    More
  • AMMC Product Series
    AMMC Product Series
    The AMMC (Amphenol Micro-Miniature Coaxial) connector series is a low profile (1.4 mm of the board) series with an extremely small board footprint (2mm x 2mm). This series is used in applications with 50 Ω impedance requirements and has a performance from DC to 6 GHz. The coupling style of the AMMC connector series is snap-on for secure and easy mating.
    More
  • Between Series Adapters
    Between Series Adapters
    Amphenol RF's between series adapters are 2-port interconnects that provide a mechanical conversion between two RF connector types. They are available across many connector series and in a variety of orientations and mounting types.
    More
  • Coaxial Fixed Attenuators
    Coaxial Fixed Attenuators
    Amphenol RF attenuators are designed to offer flat attenuation over the designated frequency range and feature a microwave grade resistor that consistently reduces power. Hex flats on the body allow this attenuator to be easily torqued to the mating connector.
    More
  • Coaxial IPTV Splitters
    Coaxial IPTV Splitters
    GHPNA Coaxial IPTV Splitters
    Holland's GHPNA splitters have been specifically designed to work in HPNA environments. The low port-to-port isolation allows HPNA communication signals to pass through the splitters to set top boxes with as little signal loss as possible. At the same time the GHPNA Series splitters provide good return loss and
    More
  • Coaxial Terminators and Loads
    Coaxial Terminators and Loads
    Amphenol RF terminators are available in many common series and genders including 1.0/2.3, APC-3.5, APC-5. 5, BNC, F-type, HD-BNC, N-Type, QMA, and SMA. Amphenol RF terminators reliably prevent RF signals from being reflected along the transmission line to reduce interference.
    More
  • Connector- QC2 F connector
    Connector- QC2 F connector
    The QC II F-Connector is a universal compression connector that is ideally suited for professional and consumer use. The simple to use one-piece design provides a secure 360 degree compression seal resulting in maximum RF shielding performance. The all metal design of the connector body and nut allow for unparalleled electrical and mechanical performance. The detachably coupled advanced polymer compression system is pre-positioned to ensure a consistent fit with the cable and is color coded to allow differentiation between different cable series.
    More
  • CPI-WHP Isolator & Surge Protector
    CPI-WHP Isolator & Surge Protector
    Amphenol offers a full line of CATV isolators and surge protectors.

    The CPI-WHP is an IEC Class Level 5 isolator offering the surge protection performance necessary to ensure the highest telecom equipment survivability. The device protects cable modems, STB's and other CPE and plant equipment from damage due to fast transients and spikes from electrical storms and power surges.

    High winds, thunder, rain showers and flooding are commonplace in regions with high electrical storm activity. The CPI-WHP is rated to IP67 standards for protection against wind-blown objects and moisture - up to full submersion in a meter’s depth of water.
    More
  • Crimp Tools
    Crimp Tools
    Amphenol RF offers a full line of termination tooling to meet your specific production requirements. All tools meet Amphenol’s stringent design and quality requirements and provide a consistent and reliable crimp each and every time, thereby ensuring the integrity of the connector termination.
    More
  • N-Type Product Series
    N-Type Product Series
    N-Type connectors, adapters, and cable assemblies are designed to satisfy the need for a durable, weatherproof, medium-size RF products with consistent performance through 11 GHz. Our N-Type connecters feature threaded coupling mechanisms and are fully interchangeable with N-Type connectors made to the MIL-C-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical.
    More
  • PhaseTrack®
    PhaseTrack®
    PhaseTrack® cable assemblies are designed for applications demanding minimal phase change over temperature. All PhaseTrack cables use proprietary TF4® dielectric that does not have the abrupt shift in the phase that occurs with solid or tape wrapped PTFE based products under normal room ambient temperature conditions. PhaseTrack cable has the same triple shield construction used in Times popular SF®, SFT®, SilverLine® and MT cables.
    More
  • RF Combiners
    RF Combiners
    Amphenol Private Networks' product programme of VHF & UHF RF combiners allow multiple transcievers to be connected together through one antenna system. Traditional designs are combined with state-of-the-art technologies to produce world leading products, including:
    Cavity Combiners
    Hybrid Combiners
    Single-Tray Combining Solutions
    Active Reciever Multicouplers
    More
  • RF Filters
    RF Filters
    Amphenol Private Networks' product programme of VHF & UHF RF Filters provide high-quality RF signal conditioning for professional applications. Products are available for frequencies between 27MHz and 5. 8GHz, including:
    High Pass and Low Pass Filters
    Duplex Filters
    Diplexers and Triplexers
    Band Pass / Band Reject Filters
    More
  • SFT™
    SFT™
    SFT™ high performance microwave cables are rugged and flexible making them ideal for interconnect applications from inside LRUs to system interconnects and antenna feeders in military and commercial systems. The wide range of available connectors cover many interface types and frequency ranges.
    More
  • 1.0-2.3 Connectors
    1.0-2.3 Connectors

    DIN 1.0-2.3 connectors are available to perform at 50 ohm with a maximum frequency of 10 GHz as well as 75 ohm with a maximum frequency of 4 GHz. These performance specifications support high data rates for AES Audio, SD video, HD video, 3Gb/s video, and other high density digital broadcast formats. The DIN 1.0-2.3 connector series complies with DIN 41626, DIN 47297, and NFC 93-571 international specifications.

    The Amphenol version features a patented ultra-slim push-pull coupling system which allows quick installation and ensures positive locking and high retention.

    More
  • Waveguide Connectors
    Waveguide Connectors

    Waveguide connectors are tapered through multistep transitions that adjust their shape in stages from elliptical to the rectangular shape of industry-standard waveguide flanges. Each connector has a pressure inlet to allow the connection of pressurization equipment. Made of brass to provide long service life and compatibility with metals used in the waveguide itself.

    More

Contacts & Termini

  • 75Ohms Coaxial Contacts
    75Ohms Coaxial Contacts
    75Ohms Coaxial contacts are ideal for video acquisition. This contact range meets the 3G-SDI. Available in Crimp and PC Tails with three different sizes: 6, 8 and 12. This contact range fits within standard cavity of MIL-DTL-D38999/EN3645, SIM/EN4165, ARINC, and 2M.
    More
  • ARINC 801 Termini
    ARINC 801 Termini
    ARINC 801 termini are designed for use in Amphenol ARINC 801 fiber optic connectors-manufactured to comply with ARINC 801. Termini are available with both PC and APC end-face finishes.
    More
  • Coaxial Contacts
    Coaxial Contacts
    High speed coax contacts within a connector provide the shielding protection, and many cases the RF/ microwave performance, needed in the circuitry of many applications. All popular series of Amphenol circular connectors and many rectangular connectors are available with coax contacts. Diameters are standardized in sizes 4, 8, 12 and 16 so that coaxial contacts may be interchanged with power contacts in connector arrangements which include those sizes. Popular RG cable types and a variety of other commercial coaxial cables can be accommodated.
    More
  • Concentric Twinax Shielded Contacts
    Concentric Twinax Shielded Contacts
    The size 8 Concentric Twinax contact was developed for use in MIL-STD-1553 Airborne multiplex data bus applications which require high performance interconnect characteristics in multi-pin connectors. Ideal for this application need is the high performance Tri-Start connector with its fully scoop-proof feature of recessed pins. The Concentric Twinax contact is crimp terminable to twisted shielded cable.
    More
  • Differential Twinax Contacts
    Differential Twinax Contacts
    Offers several advantages for high data transfer rates, low power consumption and excellent EMI compatibility. Amphenol Twinax contacts terminate to a variety of cables and are also available with PCB tails.
    More
  • FSBDC Series Bayonet Duplex Connector
    FSBDC Series Bayonet Duplex Connector
    The FSBDC (Bayonet Duplex Connector) is ideal for a variety of applications in harsh environments. FSBDC is rugged, has a tri-mating bayonet locking mechanism, and is sealed ensuring high environmental and optical performance in a variety of AFSI designs, manufactures, markets and supports environmental and optical performance in a variety of applications ranging from land tactical to telecom applications. The FSBDC is based on the proven Pattern 105 size 10 series of electrical connectors. The bayonet coupling offers simplistic and quick mating/de-mating. The shell material can be brass, aluminium or marine bronze. Keying options provide superior alignment, optical performance and can also prevent misconnection. This connector series is compatible with tactical cable styles for the plug and simplex ruggedzied cable for the receptacle both in multimode or singlemode.
    More
  • HD20 Multi-Mode Termini
    HD20 Multi-Mode Termini
    Multi-mode HDF20 Fiber Optic Termini Designed for use in the size 20 contact cavities of Multi-channel MIL-DTL-38999 Series III Connectors and Amphenol CF38999 Fiber Optic Connectors
    More
  • High Frequency Coaxial Contacts
    High Frequency Coaxial Contacts
    Amphenol offers DC to 40 GHz high frequency size 8, 12 and 16 coaxial contacts for the D38999 Series III housing and standard inserts. These contacts allow any application to continue to use the D38999 connector and be able to expand the use to include the microwave transmission lines.
    More
  • JSFC Fiber Optic Contacts
    JSFC Fiber Optic Contacts
    Approved for use in JSF/F-35 applications.
    More
  • Lumiere
    Lumiere
    Amphenol FSI offers the Lumiére fiber optic terminus for commercial airframe, avionics and aerospace applications. AFSI's Lumiére termini are a direct replacement for ELIO® termini and are compatible with existing ELIO® connectors. This fiber optic contact utilizes a 2.5mm diameter field-proven ceramic ST type ferrule, which can be inserted into a size 16 cavity. The terminus is hermaphroditic allowing the use of the same contact in the receptacle or plug. In addition, the contact is available in both multimode and single mode versions. An anti-rotation feature allows PC, UPC and APC polishes. Because the Lumiére features a standard ST type ferrule, well known procedures and readily available tools can be used for termination. Long and short boot versions are available to support multiple connector types.
    More
  • Lux Beam
    Lux Beam
    Lux Beam is a single expanded beam termini compatible with multi-source connectors (38999, EN4165, EN3645). Featuring ball lens technology with an expanded beam superior to 50X in multimode, this solution is ideal for head-up display, tactical communication, avionics communication, equipment with hybrid connection in harsh environments.
    More
  • M28876 MPC Termini
    M28876 MPC Termini
    The Amphenol Fiber Systems International (AFSI) design of the M29A1350 and M29B1350 APC termini are based on qualified M29504 /14 and /15 termini. These termini are designed exclusively for use in the APC28876 low back reflection, multi-channel count connector series. The connectors and termini, based on the military qualified M28876 connector, are designed for use in harsh environment applications.
    More
  • M29504/14 & /15
    M29504/14 & /15
    M29504/14 & /15 termini from Amphenol Fiber Systems International (AFSI) are qualified to MIL-PRF-29504B specifications. This series of fiber optic termini provide superior optical and mechanical performance and are compatible with M28876 and comparable military-style connectors. Unlike other M29504/14 & /15 designs, AFSI's product is precision-engineered, allowing the ferrule to press-fit and bottom out within the terminus bodies. This strict tolerance management eliminates loose fit or epoxy construction and yields better overall performance under stressful environmental conditions. The M29504/15 features a ceramic alignment sleeve, maximizing its ability to hold extremely tight dimensional tolerances while maintaining accurate concentricity, providing superior mechanical and optical performance.
    More
  • M29504/4 & /5
    M29504/4 & /5
    Amphenol Fiber Systems International's (AFSI) M29504/4 & /5 style fiber optic termini, the M29K1000 and M29L1000 provide superior optical and mechanical performance. Designed to fit into MIL-DTL-38999 Series III, pin size 16 connectors, this low cost, high precision termini family is ideal for harsh environment fiber optic interconnections. Available for single mode and multimode applications, these termini are qualified to MIL-STD-29504/4 & /5 Rev. D. The M29K1000 and M29L1000 series termini utilize the highest quality zirconia ceramic ferrules and split alignment sleeves available. AFSI's tight-tolerance ferrules are optimized for low insertion loss, low back reflection and exceptional durability. All ferrules are capable of standard and ultra-polished end faces for those tight optical budget applications. In addition, epoxy removal and polishing times are minimized by the ferrule's pre-domed design feature.
    More
  • MIL-PRF-29504 90° Fiber Optic Termini
    MIL-PRF-29504 90° Fiber Optic Termini
    Amphenol provides 90°, size 16 fiber optic termini that can be used with multi-channel circular connectors. Consult Amphenol for the 90°, size 16 termini for use in LRM rectangular connectors. (Please consult Amphenol for availability of 90° size 20 termini).
    More
  • MIL-PRF-29504 Fiber Optic Termini
    MIL-PRF-29504 Fiber Optic Termini
    MIL-PRF-29504 fiber optic termini are designed for use in size 16 legacy D38999 Series III and CF38999 connectors. CF38999 are the same as the standard D38999 connectors, except they hold tighter tolerances on shell keying and insert geometry. These termini offer high optical performance available in single and multi-mode.
    More
  • MIL-PRF-29504/16 style termini (NGCON)
    MIL-PRF-29504/16 style termini (NGCON)
    The MIL-PRF-64266/16 style (NGCON termini) is a rear release, stainless steel design that utilizes a beryllium copper retaining clip, a ceramic ferrule and a front sealing O-ring. The durable heat-treated retaining clip ensures repeatable and consistent performance over the terminus life cycle. The M29N series termini use high precision 1.25mm ceramic ferrules providing the best optical performance available on the market today and are designed in accordance with M29504/18 (standard), /19 (dummy) & /20 (keyed).
    More
  • MT Ferrule Termini
    MT Ferrule Termini
    Designed for use in Amphenol MT38999 circular connectors and also for rectangular products: printed circuit board interconnects, LRM, VME64 and VITA46 interconnects.
    More
  • OCS Oval Contact System
    OCS Oval Contact System
    The OCS (Oval Contact System) is the newest D38999 interconnect product offering from Amphenol High Speed Solutions, it provides many advantages for high speed data transmission.
    More
  • Octonet Contacts
    Octonet Contacts
    Superior Ethernet contact system for MIL-DTL-38999, Series III. Eight strategically spaced inner contacts form four 100 Ohm matched impedance differential pairs. Easy drop-in replacement to installed connectors; no need to redesign. Self-removing contact feature - no extra contact extraction tool needed (24 Gauge only). Octonet Contacts are ideal for Ethernet or AFDX networks with a reduced envelope. This contact range fits within standard size 8 cavity of MIL-DTL-D38999/EN3645, SIM/EN4165,ARINC.
    More
  • PC Tail Coax, Twinax, Triax Contacts
    PC Tail Coax, Twinax, Triax Contacts
    PC Tail shielded contacts provide a cost effective packaging solution for limited space applications where connectors are attached to printed circuit boards. High reliability is assured with factory pre-assembled contacts and standardization termination to the board. PC Tail contacts are available for MIL-DTL-38999 Series I and III circular connectors and also for ARINC 404, ARINC 600 and R27 rectangular connectors.
    More
  • Promi
    Promi
    Promi is a miniature optical cable adaptor for reduced space. It features a compact removable splice for easy installation & maintenance, a split nut for easy installation and a boot for sealed connection.
    More
  • Quadrax Contacts
    Quadrax Contacts
    High Speed Quadrax Contacts consist of an outer contact with four inner contacts spaced to form two 100 or 150 Ohm controlled impedance differential pair. Both contacts, when used in Amphenol MIL-DTL-38999 Series III and ARINC type connectors, provide an excellent option for harsh environment applications such as: Ethernet 100 Base-T-100 Ohm, Gigabit Ethernet 1000 Base-T-100 Ohm, Fibre Channel-150 Ohm, IEEE 1394B FireWire-110 Ohm. Used in MIL-DTL-38999/EN3645, SIM/EN4165 and ARINC600 connectors.
    More
  • Signal and Power Contacts
    Signal and Power Contacts
    Featuring several terminations (Crimp, Solder, PC Tail, Compliant pins), the signal contacts are ideal for MIL-DTL-38999/EN3645/2M, SIM/EN4165, EN2997, ARINC600 or even relay sockets. They're in accordance with the latest standards (European - EN3155)
    More
  • SMPTE 304M Termini
    SMPTE 304M Termini
    Amphenol FSI SMPTE 304M series fiber optic termini (110-TP-125 pin and 110-TS-125 socket) provide superior optical and mechanical performance. Designed to fit into SMPTE 304M standard connectors from AFSI and other selected suppliers, this low-cost, high-precision termini family is ideal for use in harsh environment fiber optic interconnections. Available for single mode and multimode fibers, these termini conform to the interface requirements of the SMPTE 304M standard.
    More
  • Split-Pair Quadrax Contacts
    Split-Pair Quadrax Contacts
    Amphenol offers the high performance interconnect solution for CAT6A type cable. For use with: 10/100/1000/10G Base-T Ethernet; DVI; USB 2.0/3.0; PCI-Express 2.0; HDMI 1.3a; SATA 2.0
    More
  • TFOCA-II MTFP Series
    TFOCA-II MTFP Series
    Built in accordance with MIL-PRF-29504/16, the MTFP termini feature an innovative double-floating seal design that allows maximum terminus travel with minimum side forces transferred to the terminus. This design ensures maximum optical isolation and terminus sealing under the harshest conditions. For use in AFSI TFOCA-II® connectors and other TFOCA connectors built in accordance with MIL-PRF-/16 & /17.
    More
  • Triax Contacts
    Triax Contacts
    Provide additional shielding when terminated to triax cable having solid or stranded center conductors. Amphenol supplies triax contacts in sizes 8, 10 and 12 and they are ideally suited for use in D38999 Series I, II and III circular connectors.
    More
  • Battery Connector (3 pin)
    Battery Connector (3 pin)
    201-C2760-00343
    More
  • Battery Connectors
    Battery Connectors
    Amphenol’s comprehensive offering of battery connectors for mobile phones come in single and multi-contact versions with straight and right angle mountings. They are available in a variety of pitches and heights to meet different phone and battery pad requirements.
    More
  • Contact Pads (Press-on Contacts)
    Contact Pads (Press-on Contacts)
    Amphenol’s contact pads are used in contact areas and as spacers on PCBs. Durable plating includes a diffusion barrier. The contact pads connect with low resistance over the product’s lifetime for use in sensitive connections of antennas, microphones, and carbon PCBs. They are available in a wide variety of shapes and sizes.
    More
  • Spring Clips
    Spring Clips
    Amphenol’s spring clips are very versatile and can be used in many applications including: antennas, metal housing connections, grounding connections, shielding connections, ESD & EMC connections, and LSD connectors. Amphenol offers more than 70 different P/Ns within 4 major families, including low and high force range standard fingers, side-protected and side-protected with preload. Customized clips can also be designed and manufactured on demand.
    More
  • Spring Loaded Connectors
    Spring Loaded Connectors
    Amphenol offers a wide product range of spring loaded connectors. These connectors have a large working range and high contact force allowing safe data transmission. They are widely used in wearable applications and can also be fitted in various customized connecting solutions.
    More
  • Gold Plating Pogo - C710 F01039 049 1
    Gold Plating Pogo - C710 F01039 049 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 F01043 056 1
    Gold Plating Pogo - C710 F01043 056 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 F01051 058 1
    Gold Plating Pogo - C710 F01051 058 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 P01062 070 1
    Gold Plating Pogo - C710 P01062 070 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 F01069 076 1
    Gold Plating Pogo - C710 F01069 076 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 P01090 104 1
    Gold Plating Pogo - C710 P01090 104 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 D01030 039 D
    Gold Plating Pogo - C710 D01030 039 D
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 D01063 077 D
    Gold Plating Pogo - C710 D01063 077 D
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 D01087 097 1
    Gold Plating Pogo - C710 D01087 097 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 F01017 024 1
    Gold Plating Pogo - C710 F01017 024 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 F01027 033 1
    Gold Plating Pogo - C710 F01027 033 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 F01025 035 1
    Gold Plating Pogo - C710 F01025 035 1
    Au Plating Pogo
    More
  • Gold Plating Pogo - C710 F01032 040 1
    Gold Plating Pogo - C710 F01032 040 1
    Au Plating Pogo
    More
  • Plating Pogo
    Plating Pogo
    C710 F01043 051 P Pd/Ni plating pogo
    More
  • Pogo Pin
    Pogo Pin
    C710 F01017 022 1 Pogo pin Au plating pogo
    More
  • Octomax 1G26 Contacts
    Octomax 1G26 Contacts

    A new generation of Ethernet contacts compatible with Size 8 quadrax cavities for D38999, EN3645, EN4165 connectors

     

     

    More
  • 75 Ohms HD Coaxial Contacts
    75 Ohms HD Coaxial Contacts

    Coaxial contacts for D38999,EN3645, EN4165, 387TV connectors for Ultra HD video applications

    Pin coax contact HD75OHMS - 612356

     

    More
  • RF Coax Contacts
    RF Coax Contacts

    Coax Contact for RF applications with high frequencies requirements (up to 65GHz)

    More
  • Temper-Grip Power contacts
    Temper-Grip Power contacts

    A new generation of power contacts for connectors

    More
  • MIL-DTL-38999 compatible / Contacts
    MIL-DTL-38999 compatible / Contacts
    High-speed contacts for demanding applications: Compatible with MIL-DTL-38999 Series I, II and III (TV/CTV, SJT, JT and LJT) connectors in various contact sizes (8, 12, 16). The contacts are suitable for a wide variety of cable types and are available in crimp and PCB versions – ideal for flexible system requirements and reliable high-speed connections. Contacts for MIL-DTL-38999 I, II, and III High-speed signal and data transmission Quadrax, split pair Quadrax contacts Triaxial and coaxial contacts Twinax & differential or concentric Twinax contacts Octonet - Contacts Connector accessories: end housings, caps, seals, and more. Data transmission, PCB connectors, signal transmission. Defense, aviation, aerospace, marine, urban air mobility, unmanned systems, industrial applications. Octonet contacts, a size 8 10G Ethernet-compatible contact, Quadrax contacts, Split-Pair Quadrax supporting speeds up to 6.5 Gbps per pair, Differential Twinax, Concentric Twinax contacts, Matched impedance coaxial contacts, coaxial contacts, High-frequency coaxial contacts, FiberQuad Ruggedized Quadrax contacts that embed a fiber optic transmitter or receiver along with supporting electronics within a Quadrax contact to provide a plug-and-play solution. Contacts and adapters
    More

HV Connectors

Rectangular Connectors

Input&Output Connectors

  • DVI
    DVI

    DVI

    More
  • HDMI
    HDMI

    HDMI

    More
  • Phone Connectors Audio Jack - Low profile
    Phone Connectors Audio Jack - Low profile
    103-C5750-00535
    Low profile
    More
  • Micro USB - IPX8
    Micro USB - IPX8
    101-C3410-00539
    Micro USB
    More
  • Micro USB - IPX7
    Micro USB - IPX7
    101-C5240-00541
    Micro USB
    More
  • Micro USB 2.0
    Micro USB 2.0
    101-C049C-00533
    Micro USB 2.0
    More
  • Micro USB 3.0
    Micro USB 3.0
    The Micro USB 3.0 connector is a smaller version of the Mini USB 2.0 connector. The connector features SuperSpeed, a new transfer mode that enables data transfer rates up to 5Gb/s, which is a ten times increase in performance over its predecessor. The connector also features high durability, allowing over 10,000 insertion cycles.
    Amphenol ICC offers Micro USB 3.0 Type B receptacle in surface mount style, header and cable solutions. The full metal shield offers protection from electromagnetic interference and electrostatic discharge.
    The specification of the Micro USB 3.0 supports the current USB On-The-Go (OTG) supplement and provides total mobile interconnectivity. It enables communications between portable devices without the need for a host computer. It also allows convenient recharging and power supply between computers and electronic devices, thereby replacing the need for adapters and power chargers.
    Micro USB 3.0 connectors are ideal for applications in telecom, datacom, consumer electronics devices and industrial markets.
    More
  • Micro USB 3.0 B type
    Micro USB 3.0 B type
    101-C248F-01030
    Micro USB 3.0 B type
    More
  • Mini HDMI Connectors
    Mini HDMI Connectors
    Amphenol’s HDMI and Mini HDMI connectors provide an interface between any compatible digital audio and/or video devices. These connectors are available in different sizes and configurations and support HD-video plus multi-channel digital audio on a single cable.
    More
  • Type C USB (5A), screw fix
    Type C USB (5A), screw fix
    101-C4740-02432
    More
  • Type C USB (5A), dip solder
    Type C USB (5A), dip solder
    101-C4840-02432
    More
  • Type C USB (5A) IPX7, screw fix
    Type C USB (5A) IPX7, screw fix
    101-C5880-02453
    More
  • Type C USB (8A), dip shell solder
    Type C USB (8A), dip shell solder
    101-C608A-01634-B
    More
  • USB Type C Connector System
    USB Type C Connector System
    SCALABLE, SUPERSPEED CONNECTOR SYSTEM
    USB Type C connectors are expected to be widely used as a next-generation interface. They support a variety of protocols such as USB2.0/3.0/3.1 and meet Superspeed communication 10Gb/s, 5A and 20V power supply.

    The usability for USB 3.1 Type C connector is enhanced also by its low profile and reversible product design. It is ideal for emerging product designs.
    More
  • Waterproof I/O Connectors
    Waterproof I/O Connectors
    Amphenol develops waterproof I/O connectors for mobile and wearable devices including smartphones, rugged mobile phones, smartwatches, and fitness bands where environment requires protection at Ipx7 or even Ipx8 levels. Our range of waterproof products covers microUSB connectors, AudioJack connectors, and the more recent USB type C connectors. These improved connectors are usually customized for customer specific applications.
    More
  • Audio Jack - Mid Mount
    Audio Jack - Mid Mount
    103-C4880-00646 Audio Jack
    More
  • Audio Jack - Low Profile
    Audio Jack - Low Profile
    103-C595A-00546 Audio Jack
    More
  • Audio Jacks
    Audio Jacks
    Amphenol's range of Audio Jacks are widely used in mobile phone applications. These connectors are available in different configurations, e.g. compressed type or for SMT solderable versions and fully customized to the application requirements.
    More
  • Rugged D-Sub
    Rugged D-Sub
    RUGGED D-SUB PANEL MOUNT CONNECTOR IP67 SEALING

    Ruggedized D-sub connectors with die cast housings and IP67 sealing for Harsh Environment applications, provide reliable performance in extreme conditions for the most demanding applications, and mate with standard connectors.

    IP67 sealing protects against water, dust
    Die cast metal housings protect against mechanical damage
    Standard Density 9 pins to High Density 15 & 26 pins replace standard equivalents
    Operating temperature range from -44°C to +105°C for extreme conditions
    RoHS for environmental compliance
    More
  • Rugged USB
    Rugged USB
    RUGGED USB CONNECTOR FOR HARSH ENVIRONMENT APPLICATION, GENERATION 2

    Amphenol's MUSBR series USB Connectors is a line of Generation 2 ruggedized USB connectors with die cast housings and IP67 sealing, designed for Harsh Environment applications. Rugged series provide reliable performance in extreme conditions for the most demanding applications, and mate with standard USB plugs.

    Rugged USB Connector Series serve many markets and applications across the globe including Automotive, Communications, Consumer, Data, Industrial and Medical.

    MUSBR series is offered in Type A, Mini B, Mini AB and Type C connector interface
    IP67 sealing protects against water and dust
    Die cast metal housings protect against mechanical damage
    Compact design saves panel space
    Operating temperature range from -55°C to +105°C for extreme conditions
    RoHS compliant to meet environmental standards
    More
  • Sealiable®S SATA
    Sealiable®S SATA
    Features and Benefits:
    1. Meets IP67 protection degree of IEC60529
    2. Transmission speed can be up to 6Gbps
    Mechanical Performance:
    1. Ambient temperature range: -40 oC ~ +105oC
    2. Mated cycle :Min. 500 times
    3. Terminal retention force: Min. 10KG
    Electrical Performance:
    1 .Dielectric Withstanding Voltage: 500 VAC for 1 minute no breakdown
    2. Insulation Resistance: 5 MOhm minimum.
    3. Contact resistance:Max 5mOhm
    More

Other Solutions

  • LED Indicator
    LED Indicator

    LED Indicator

    More
  • VENTS
    VENTS
    Comprehensive range of protective vent product line with Metallic/Plastic Snap-in/Stainless Steel versions that equalize the pressure inside/outside the sealed enclosure and prevent heat dissipation of electronic components from shortening devices service life and affecting components performances.
    With waterproof IP68/IP69K ingress protection and hydrophobic/oleophobic membranes keep liquids, oils, and moisture out and reduces condensation in sealed enclosure.
    More
  • Camera Sockets
    Camera Sockets
    Amphenol provides 20 & 24 contacts camera module sockets for mounting on PCBs allowing mobile camera installation without any additional devices or processes.
    More
  • Wireless Charger
    Wireless Charger
    Amphenol Tecvox has introduced several Wireless Chargers for the automotive OEM market. These chargers support multiple global standards, and includes features such as anti skid pads, thermal management, foreign object detection, dead phone detect, and light indicators. They can be seamlessly integrated into existing infotainment architectures as well as other chargers and data management devices.
    More
  • LOCC-Box Current Controller
    LOCC-Box Current Controller

    The LUETZE LOCC-Box is an intelligent electronic overload and short circuit monitoring system designed for Industry 4.0 applications. It enables selective shutdown even with high cable impedance, integrating seamlessly into existing communication networks. Optimized for switching capacitive loads, it stores error data to prevent repeated disturbances upon restart. Available in 1- and 2-channel versions within an ultra-compact 8.1 mm module, the LUETZE LOCC-Box offers up to 50 configurable settings and uses bridges instead of wiring for quick connection.

    More
  • LCOS CC Wiring Protection
    LCOS CC Wiring Protection

    The LUETZE LCOS CC (I) system is an advanced electronic overload and short-circuit protection solution, building upon the proven functions of the LOCC-Box. It features selective shutdown, high line attenuation, and integrated fault memory. Available in 2-channel and 2-pole modules, it includes a powerbus for the return circuit, allowing direct load connection. Diagnostics can be performed via LOCC-Pads or fieldbus integration for enhanced monitoring and control.

    More
  • Relays and Solid-State Relays (LCIS Series)
    Relays and Solid-State Relays (LCIS Series)

    LUETZE LCIS series relays, solid-state relays, and isolating converters support isolation voltages up to 4 kV, offering reliable switching and coupling for a wide range of applications. Designed for operating temperatures from -40 °C to 75 °C, they handle loads up to 250 V/16 A. Available with screw, tension spring, and push-in connections, LCIS relays carry UL, CSA, and GL approvals for global use. The innovative LCIS housing enables simplified installation via isolated bridges and various termination options. With a compact depth of just 71 mm, they fit easily into low-profile distribution boxes, and marking tabs allow easy, error-reducing labeling.

    More
  • Signal Converter and Temperature Converter
    Signal Converter and Temperature Converter

    LUETZE LCIS series converters are designed for a wide range of industrial applications, performing tasks such as signal conversion, temperature measurement, and signal boosting or isolation. With extremely low heat dissipation and minimal power loss, these units are suitable for demanding environments, including hard-to-reach and remote locations like wind turbines. Operating within a temperature range of -40 °C to +75 °C, they combine robust performance with a compact 71 mm depth, allowing installation in distribution boxes. Marking tabs simplify labeling, reduce wiring errors, and streamline installation.

    More
  • LCOS Power Supplies
    LCOS Power Supplies

    The LUETZE LCOS Power Supplies is an ultra-compact 120 W switching power supply unit designed within the successful LCOS housing system. As one of the smallest 120 W power supplies worldwide, it offers enhanced over-voltage protection, integrated Power Factor Correction (PFC), and a fault message output for improved safety and performance. Ideal for space-constrained applications, the LCOS PS delivers reliable power in a highly compact form factor.

    More
  • Relay Module with Positive-Action Contacts
    Relay Module with Positive-Action Contacts

    The LUETZE relay module with positive-action contacts complies with IEC 61810-3, IEC/EN 60255, and IEC 60664-1 standards, making it suitable for safety-related applications in rail technology. Depending on requirements, the module can be supplied with 2 (1NO/1NC) up to 8 contact sets (7NO/1NC). With positively driven contacts, it ensures maximum safety and reliability. Clearances and creepage distances of ≥ 5.5 mm provide enhanced insulation. Relay modules are available for all operating voltages commonly used in rail applications.

    More
  • Function Relay (Timing Relay)
    Function Relay (Timing Relay)

    The LUETZE function (timing) relay is a versatile and freely programmable solution, configurable via free software. A pre-configured model tailored to customer specifications is also available ex works. With wide-range voltage supply and control, it supports all standard on-board voltages from 24 V to 110 V DC. Available with semiconductor outputs for 24 V and 110 V or with positively driven contacts, the LUETZE timing relay ensures flexibility and safety in railway applications.

    More
  • Audio Signal Transducer with TRDP
    Audio Signal Transducer with TRDP

    The LUETZE Audio Signal Transducer with TRDP enables flexible audio playback and control for rail applications. Configuration (IP and audio) is managed via a web server, while playback is controlled by TRDP message data telegrams or digital inputs. Supporting up to 256 audio files (approx. 15 MB), it allows easy copy and paste of configurations through a web interface. Integrated volume control offers predefined presets, default (100%), or configurable/TRDP-controlled volume settings.

    More
  • Audio Signal Transducer
    Audio Signal Transducer

    The LUETZE Audio Signal Transducer provides playback of acoustic warnings, speech, and melodies for railway applications. It supports a total audio length of up to 15 minutes, controlled via 6 digital wide-range inputs. Audio files can be prioritized, and volume is adjustable using the integrated potentiometer. Compatible with *.WAV and *.MP3 formats, it is available in versions for wall mounting or with an external speaker. The unit is programmable via free software, making it versatile for customized audio signaling in demanding environments.

    More
  • Universal Buzzer
    Universal Buzzer

    The LUETZE Universal Buzzer is designed for versatile acoustic signaling across a wide range of applications. Different tones can be parameterized via the programming interface, either directly from LUETZE or through free software. Operating with voltages between DC 24 V and 110 V, it supports multiple operating modes including continuous, interval, or change-over. Available in three versions – wall mounting, back wall mounting, or DIN rail mounting – the Universal Buzzer provides maximum flexibility for integration in rail and industrial environments.

    More
  • External Audio Signal Transducer
    External Audio Signal Transducer

    The LUETZE External Audio Signal Transducer is a powerful electronic sound generator designed for outdoor warning applications. Delivering sound pressure levels of up to 122 dB(A) at 1 m (depending on tone and settings), it ensures clear signaling in demanding environments. Controlled via 4 digital inputs (binary codable) with up to 14 tones available, it offers versatile signaling options. Multiple connection variants are available, including round plug, plug housing, and 90° C angle plug. Day and night control input allows reduction of sound pressure levels at night. Easy programming is possible via a configuration tool with multiple setting options.

    More
  • Boot Assembly
    Boot Assembly

    Weather-sealing, pressurization-ready boot inserts that provide a clean, strain-relieved entry for elliptical waveguide runs at cabinets, walls, poles, or shelter pass-throughs. Fast to install, compatible with common EW sizes.

    More

PCBs & Flex Products & Bus-Bars

Mechatronics & Plastics

  • Metal Injection Molding (MIM)
    Metal Injection Molding (MIM)
    Amphenol produces high quality parts with over 90% metal density through our metal injection molding (MIM) process. The MIM process provides greater flexibility in design complexity, prevents corrosion, and provides a resistant polish. It allows us to produce large runs with a very low material waste. The MIM process is used on components of various applications including mobile phones, laptops, and industrial and automotive platforms.
    More

Power & Signal Connectors

  • VG Version B / Marine Bronze
    VG Version B / Marine Bronze

    For use in extremely demanding, saline environments, Amphenol-Air LB relies on the VG-approved version B: Marine Bronze Maritime applications place increased demands on every component due to their use in salty and humid environments.

    More
  • VG version J / Zinc-Tin
    VG version J / Zinc-Tin

    Breakthrough to a cadmium-free future: Amphenol-Air LB sets new standards with its VG-approved version J. Zinc-tin is an innovative, environmentally friendly alternative to cadmium-plated surfaces. 1:1 compatible and equivalent for a future-proof technology without compromise.

    More
  • MIL-PRF-28876 / FS34
    MIL-PRF-28876 / FS34

    This multi-channel fiber optic connector has already proven itself in many field applications in harsh environments and is suitable for both multimode and single-mode applications. The end housings are equipped with a QuickLock fastening system. This system is not only easy to install, but also allows for the simple removal and re-insertion of the aramid yarn from the cable without shortening the cable. The QuickLock end housing also provides easy access for maintenance or reconfiguration of the connectors without altering the aramid fiber.

    More
  • HDM / HQM
    HDM / HQM

    HDM duplex connectors with bayonet locking provide a robust optical connection in a compact housing (less than 22 mm outer diameter of the locking nut). They comply with IP68 protection class and the RoHS environmental directive. The 1/4-turn locking mechanism of the bayonet fitting ensures a quick and secure connection. This product is specifically designed for connecting fiber optic cables, eliminating the need for cable polarization and inline adapters.

    More
  • MIL-DTL-26482 based / BDC | BQC
    MIL-DTL-26482 based / BDC | BQC

    The BDC series is designed for multimode duplex cables with a tight jacket and is available for 2 to 4 channels. The 3-pin bayonet-locking connectors feature a smaller and lighter housing based on MIL-DTL-26482. BDC connectors come standard with 2.5 mm zirconia-PC ceramic ferrules and guide sleeves.

    More
  • MIL-DTL-38999-III based / MFM
    MIL-DTL-38999-III based / MFM

    The lightweight MFM fiber optic circular connector is designed for harsh environments. Available in duplex and simplex versions with a 2.5 mm PC ceramic ring. The duplex version is used in the D38999 Series III housing.

    More
  • EN4644 / APEX
    EN4644 / APEX

    APEX is a modular connection system compliant with the EN4644 technical specification. Plug and socket housings are constructed from a single piece of high-quality aluminum. Precision manufacturing and overmolding technology ensure a lifetime of reliable operation. Typical applications include vane drives, power generation and control, Ethernet distribution networks, electronic load management systems, and galleys.

    More
  • JN1168 | JN1042 / 711
    JN1168 | JN1042 / 711

    Amphenol offers a wide range of couplers for transformer-based coupling between the MIL-STD-1553 (Def Stan 00-18, Part 2) data bus and single, dual, or multiple remote terminals (RTs). The integrated transformers and insulation resistors are housed in a continuous shield that provides both electromagnetic and environmental protection. Our MIL-STD-1553B data bus couplers are designed for aircraft avionics applications and are approved according to PAN6465/JN1042 and JN1052. The product range includes: RT couplers with connecting leads (e.g., 711-6116) – ideal for applications with space and weight restrictions, such as in aviation. RT-Can coupler – for switchboards and control boxes with multiple couplers in a confined space Data bus coupler RT coupler with connecting leads or as an RT-CAN coupler Meets the requirements of MIL-STD-1553B Compatible with 711 or Mil-DTL-38999 III connectors Data bus coupler with EMI/RFI protection, data transmission, signal transmission. Bayonet, Tri-Start thread. Aerospace, defense, marine.

    More
  • PAN6486 | JN1033 / PAN6484 | JN1032 | 711 series
    PAN6486 | JN1033 / PAN6484 | JN1032 | 711 series

    The 711 Series is specifically designed for high data and video transmission rates. Applications include communications, marine, and data transfer between control panels and displays according to MIL-STD-1553B and DEF STAN 00-18 (Part 2) standards.

    More
  • Filter /Connectors
    Filter /Connectors

    Filter connectors are used to provide space-saving solutions for EMI problems in numerous military and commercial applications, including avionics systems, satellites, missiles, and communication and control systems. A low-pass filter connector integrates capacitors and ferrite coils into the connector body. The type of capacitor commonly used in filter connectors for military or avionics applications is a planar array, which is an efficient filter at high frequencies (> 1 GHz).

    More
  • ARINC 404 | MIL-C-81659 / AR
    ARINC 404 | MIL-C-81659 / AR

    The AR / ARINC 404 series offers modular rack and panel connectors in 5 housing sizes for 1 to 4 contact inserts, supporting over 400 contacts. It is suitable for signal and power contacts, as well as coaxial, twinaxial, triaxial, or quadraximal contacts and fiber optic terminals for data transmission. Modular rectangular connector Rack & Panel Data, signal and power transmission Over 400 contacts per connector Max. 23A current per contact Coax, twinax, triax and quadrax contacts or optical fiber terms Rectangular connectors for data transmission, fiber optic technology, filter connectors, power transmission, PCB connectors, modular system, signal transmission, rack & panel (blind mating), aerospace, urban air mobility, defense.

    More
  • MIL-DTL-38999 based / Series five
    MIL-DTL-38999 based / Series five
    Amphenol's new Five Series connector represents the next evolutionary step in the renowned MIL-DTL-38999 series. It combines all the functions of conventional connectors – but in a lighter, smaller, and more compact housing. This makes it ideally suited to meet the increasing demands of the aerospace industry. Compact circular connector Dual-start threaded locking mechanism Data, signal and power transmission 1 to 128 contacts per connector Max. 23A current per contact Up to 20% smaller and 50% lighter compared to the TV series Circular connector for data transmission, EMI/RFI protection, power transmission, PCB connectors, signal transmission, scoop-proof, dual-start thread. Applications include defense, aerospace, unmanned systems, and urban air mobility. This compact circular connector is designed for data, power, and signal transmission. It features AS39029-certified gold-plated contacts in sizes AWG 22D to 12, is 20% smaller (reduced footprint for high-density applications), up to 50% lighter (ideal for weight-sensitive military and aerospace platforms), and offers higher dielectric strength (improved performance in harsh environments). Standard accessory threads provide EMI/RFI protection and scoop-proof contact protection. The standard temperature range is up to +200°C. The high-temperature version can withstand 300°C for up to 24 hours and 260°C continuously.
    More
  • MIL-DTL-5015 III / Matrix® 944 | 981
    MIL-DTL-5015 III / Matrix® 944 | 981
    This series, featuring removable crimp contacts from the back, offers an improved alternative to the older MIL-C-5015 solder type. It bridges the gap between an old connector standard and the environmental and performance requirements of current technologies. Dense circular connectors Threaded locking mechanism Signal and power transmission Up to 85 contacts per connector Max. 250A current per contact Firewall option Optimized contact system Circular threaded connectors, breakaway function, industrial, compatible with MIL-C-5015 solder connectors, temperature range: -55°C to +200°C, firewall version available: non-flammable, hard dielectric and liquid-resistant insert, secure contact retention by a tight-tolerance, damage-resistant metal retaining clip, fully sealed against extreme environmental conditions, contact options: crimp contacts AWG 0 to 16 connectors
    More
  • MIL-DTL-38999 I / LJT
    MIL-DTL-38999 I / LJT
    This series offers robust, highly reliable circular connectors for demanding applications where space, weight and performance are crucial – for example in aerospace, defense or industry. Specifically designed for maximum vibration resistance and effective EMI shielding, these connectors impress with their quick bayonet locking mechanism and a wide selection of housing variants, pin configurations, and contact technologies. These include crimp contacts (AWG) for signal, power, and data transmission, as well as high-speed contacts, coax, twinax, quadrax, octomax, differential twinax, thermocouples, and fiber optic terminals. circular connectors bayonet locking mechanism Data, signal and power transmission Up to 128 contacts per connector Max. 46A current per contact Contact protection (scoop-proof) Circular connectors with EMI/RFI protection, power transmission, PCB connectors, signal transmission, hermetic connectors, fiber optic technology, data transmission, scoop-proof bayonet defense, aerospace, industrial, space, urban air mobility, unmanned systems. Circular connectors for signal and power transmission, EMI/RFI protection, contact options: sizes 8, 12, 16, 20, 22M and 22D crimp, solder, PCB, coax, twinax, triax, quadrax, etc., temperature range: -65°C to +200°C, interface seal: protects against electrolytic corrosion on the contacts, five guide grooves for easy mating, contact protection: protects the pin contacts from touching and damage (e.g., during blind mating).
    More
  • MIL-DTL-38999 II / JT
    MIL-DTL-38999 II / JT
    This ultra-low-profile series offers robust, highly reliable circular connectors for demanding applications. Engineered for high vibration resistance and EMI shielding, these connectors feature a compact design, fast bayonet locking, and a wide range of shell sizes, styles, and contact arrangements. Ideal for applications where space, weight, and performance are critical, such as aerospace, defense, and industrial. Circular connectors with low profile Bayonet lock Signal and power transmission up to 128 contacts per connector max. 23A current per contact Space-saving design Circular connectors EMI/RFI protection, power transmission, printed circuit board connectors, signal transmission, hermetic connector bayonet defense, aviation, industry, space travel, urban air mobility, unmanned systems circular connectors for signal and power transmission, lightweight, space-saving design with low profile, three-pin bayonet locking, EMI/RFI protection, contact options: size 12, 16, 20, 22M and 22D crimp, solder, PCB, coax, operating temperature range: -65°C to +200°C, interface seal: protects against electrolytic corrosion on the contacts, five guide grooves for effortless mating connectors
    More
  • MIL-DTL-26482 II / Matrix® MB
    MIL-DTL-26482 II / Matrix® MB
    Matrix® MB connectors are compact, robust circular connectors compliant with MIL-DTL-26482 Series II, providing reliable signal and power transmission in demanding environments. Featuring a quick-release bayonet locking mechanism, high vibration resistance, and a proven crimp contact system, they are ideal for applications in aerospace, defense, and industrial engineering. Compact, robust circular connector bayonet locking mechanism Signal and power transmission Up to 61 contacts per connector Max. 23A current per contact Circular connectors with EMI/RFI protection, power transmission, signal transmission, bayonet type, for defense, aerospace, and industrial applications. Temperature range: -65°C to +200°C, 500 mating cycles, shock and vibration resistant, AS39029 MIL specification contacts, AWG20 to AWG12, resistant to a variety of liquids.
    More
  • Bantam &/ Bantam HD
    Bantam &/ Bantam HD
    The miniature circular connectors from the Bantam product range were specially developed for aerospace applications that must impress not only with their electrical performance but also with low costs. Bantam uses a robust coupling mechanism as well as an internal EMI grounding spring, thus providing excellent case-to-case conductivity. Miniature circular connectors bayonet locking mechanism Signal and power transmission 2 to 26 contacts per connector Max. 23A current per contact Stamped-rolled or turned contacts Circular connectors with EMI/RFI protection, power transmission, signal transmission, PCB connectors, contact-protected (scoop-proof), bayonet, aviation, urban air mobility, unmanned systems. Miniature circular connectors for signal and power transmission, optimized alternative to D-SUB connectors: secure locking; tool-free and quick mating; stamped-rolled or turned contacts; lightweight and compact; available with various mounting options, including configurations for housing and flange mounting with 2 holes; contact protection: recessed pins minimize potential contact damage; EMI/RFI protection: ground contact strip & integrated end housings for strip termination; operating temperature range -65°C to 150°C.
    More
  • SOLARIS
    SOLARIS
    Small, lightweight, sealed, cost-effective, highly reliable, and user-friendly rectangular connectors. Solaris connectors are designed for signal transmission or medium-power applications. The contacts are touch-protected, and the Solaris slide-lock mechanism is incredibly easy to use—simply push to lock and slide to unlock. Miniature rectangular connectors Push-pull locking Signal and power transmission 2 to 12 contacts per connector For AWG 22, 20, 16 M39029 contacts Rectangular connector for signal transmission, power transmission, scoop-proof, PCB connectors, push-pull, aviation, urban air mobility, unmanned systems. Quick-locking rectangular connector, signal and power transmission, lightweight housing material: ULTEM, integrated cable tie opening for easy assembly, flammability: meets FAR Part 25 Appendix F, Part 1, crimp contacts for AWG 22-16 or 90° PCB contacts available, min. 500 mating cycles (1000 typically), operating temperature range: -65°C to +175°C, protection class: IP67 connector.
    More
  • LUMINUS | PEGASUS / SJS
    LUMINUS | PEGASUS / SJS
    The SJS series of compact, sealed connectors features either a bayonet or twist-and-lock locking mechanism. The sockets are available with single-hole, square, or stand-off flanges for panel mounting. Various pin configurations are available, including mixed-pin configurations, depending on the contact size. The product range includes the following series: Miniature circular connectors Bayonet or push-pull locking mechanism Signal, data and power transmission up to 25 contacts per connector Max. 23A current per contact lightweight and small LUMINUS, PEGASUS, NANO-PEGASUS circular connectors for signal transmission, power transmission, data transmission, PCB connectors, EMI/RFI protection, bayonet, push-pull, aerospace, urban air mobility, unmanned systems. LUMINUS is made of lightweight thermoplastic, specifically polyamide 6/6 (nylon), for applications without shielding. PEGASUS builds on the successful LUMINUS aerospace connector and additionally offers EMI shielding thanks to a nickel-plated copper alloy on Ultem (polyetherimide). NANO-PEGASUS offers data connectors up to 2.5 GB at a weight of 7.5 grams per connector pair! 11-pin connector with AWG 28 contacts for USB 2.0, CAN bus, USB 3.0, CAT5 and CAT6 Ethernet, AS39029 MIL specification contacts AWG 22 to AWG 12 for broad application compatibility. Stamped and formed available as a more cost-effective option, 500 mating cycles, protection class: IP67, operating temperature range: -65°C to +125°C (Nano-Pegasus up to +175°C), locking mechanism: LUMINUS: push-pull or bayonet / PEGASUS: bayonet connector
    More
  • RAPTOR
    RAPTOR
    Raptor is the new high-current and high-voltage connector series for E-Flight, eVTOL and hybrid applications. Based on the proven Rhino series and equipped with new TALON contacts (up to 200 °C), Raptor offers partial discharge-free performance at 2 kV AC(rms) at 30,000 ft. Ideal for shielding and terminating high-voltage cables in aviation. With IP68 sealing, vibration-resistant locking mechanism, and excellent EMC performance, Raptor meets the requirements of modern electrical aviation systems. circular connectors Tri-Start locking mechanism High-performance and high-voltage applications Single-pole power connector Operating voltage at sea level: 3,000V AC (rms) Max. 1000A rated current Circular connector with bulkhead feedthrough, EMI/RFI protection, power transmission, Tri-Start thread, Urban Air Mobility, aviation, partial discharge-free performance, operating voltage 2.0 kV AC (rms) at 9,140 meters altitude, protection class: IP68, IP2X finger protection according to BS EN 60529, temperature range: -65°C to +200°C, for wires from AWG 4 to AWG 0000, Tri-Start locking (500 mating cycles), contacts for crimping, as threaded stud contacts, as female thread or busbar connector
    More
  • Molliflex®
    Molliflex®
    molliflex® is the first flat, foldable cable that can be attached to any combat vest thanks to its clever, flexible teeth. No more loose cables that can tangle and tangle, and you can even carry bags over them. With a weight saving of up to 60% compared to standard cables, molliflex® is the ultimate durable, lightweight solution for body-worn applications. Power and data cables Flat woven e-textile for devices worn close to the body Data speeds up to USB2.0 and power up to 5 amps Waterproof, dustproof (IP67) and electrically shielded Cables: Sold by the meter, patch cables, cabling for data transmission, EMI/RFI protection, power transmission, defense, marine. Lighter, more robust and more flexible than conventional cables. Lengths up to 500mm. Data speeds up to USB 2.0 and power up to 5 amps. Ideal for soldier and body-worn systems. Connects batteries, radios, GPS, computers and more. 66 / 5,000. Mechanical cyclic bending: > 2,000,000 cycles at 0 mm radius, 140° bend. Thermal cycle: > 1,000 cycles, -40 °C to +80 °C at 0 mm radius, 180° bend. Cable (E-Textile)
    More
  • MIL-DTL-83723 III / Matrix® | Pyle®
    MIL-DTL-83723 III / Matrix® | Pyle®
    This connector series comprises a variety of medium-sized, environmentally resistant circular connectors designed for demanding applications. Available in three locking variants – bayonet, screw, and quick-release – they are suitable for flexible integration into panel and enclosure assemblies, as well as for cable connections in aerospace applications. These connectors are suitable for particularly high temperatures and are frequently used in engine applications. Firewall circular connector bayonet, thread or breakaway function Signal, data and power transmission Max. 23A current per contact Up to 91 contacts per connector High temperature resistant Circular connector with EMI/RFI protection, power transmission, hermetic connector, signal transmission, scoop-proof contact protection, data transmission, breakaway function, bayonet, threaded. Aerospace, defense, urban air mobility. Mating cycles: 500. Recommended operating voltage up to 600 VAC (RMS). Pyle®: High-temperature resistant connector materials and contacts enable operation up to 200°C and firewall capability up to 260°C. Unique sealing grommet for a variety of cable diameters. Patented non-disengagement device (torque differential). • Boeing BACC63CM/CN* Firewall • European: ASD† EN2997 • General Electric: M50TF3564 • Rolls Royce/SBAC: ESC10 and ESC11. Screw locking, 2-91 contacts per connector. Matrix®: Bayonet or screw locking, as well as push-pull (breakaway function). 2-61 contacts per connector, operating temperature range: -65°C to +200°C, engine connectors
    More
  • STINGRAY 7 / STINGRAY 9
    STINGRAY 7 / STINGRAY 9
    The Stingray product line is optimized for devices worn close to the body. The connectors in this series are low-profile, compact, and sealed, making them resistant to rain, dust, dirt, and chemicals. Its magnetic connection system allows the connector to be connected without prior alignment or additional locking mechanisms. The Stingray series supports USB 2.0 and Ethernet protocols and is ideal for audio, power, and data signals. Magnetic circular connector with tear-off function Power, data, and audio signals Connectors for devices worn close to the body 7 or 9 contacts per connector max. 5A per contact 10,000 mating cycles Circular connectors for data transmission, EMI/RFI protection, power transmission, printed circuit board connectors, signal transmission, magnetic, breakaway function, defense, unmanned systems. Stingray is optimized for USB 2.0 and Ethernet protocols and is an excellent solution for audio, power, and data signals. Magnetic connection for blind mating, wipeable mating surface with spring contacts, 5000 - 10000 mating cycles, protection class IP68 in conjunction with overmolded cable (mated and unmated), operating temperature range: -55°C to +85°C. Connector
    More
  • TERRAPIN / SCE2
    TERRAPIN / SCE2
    Terrapin is a round push-pull miniature connector designed for use in harsh environments and is commonly used in military communications. The product range includes: Miniature circular connectors Push-pull locking mechanism Signal and data transmission Up to 37 contacts per connector Max. 7.5 A per contact Tear-off function Options for USB and SD cards Terrapin USB-C, Terrapin SCE2, Lightweight Terrapin, EMI Filtered Terrapin, Terrapin Micro-SD Card Reader, Gigabit Ethernet Terrapin circular connectors for data transmission, EMI/RFI protection, filter connectors, PCB connectors, push-pull signal transmission, breakaway function, defense, urban air mobility, unmanned systems. Temperature range: -55°C to +125°C, protection class: IP68. Terrapin is available in two different connection types: Snatch, a breakaway connector without moving parts, or Latch, an additional coupling ring that locks the connection. Connectors
    More
  • 3240 | 3242 | 1300 / Monoblock Assemblies
    3240 | 3242 | 1300 / Monoblock Assemblies
    Monoblock assemblies are designed for power distribution and consist of terminal blocks for copper or aluminum cable connections. Monoblock assemblies are available with single or bridged terminals, from 1 to 12 terminals, in various diameters; from 100 to 350A for cable lug connections in aircraft. Terminal blocks for cable lug connection Power transfer Up to 12 terminals Up to 350A per bolt For copper and aluminum cables Terminal Blocks / Bolt-on Distribution Blocks for Power Transmission in Aviation and Urban Air Mobility. High currents: up to 350A, fire protection according to ABD 031 and FAR 25853, operating voltage: max. 600VAC, temperature range from -60°C to +230°C.
    More
  • EN4165 compatible / 1900SIM
    EN4165 compatible / 1900SIM
    The 1900SIM series is a modular rectangular, multi-contact, and multi-function connector that combines the advantages of a 1900 connector with the versatile capabilities of a SIM/EN4165 modular connector. The variety of modules and configuration options for a wide range of applications ranges from RF contacts (Quadrax, Triax, Twinax, and Coax), to fiber optic terminations for signal and data transmission, to power supplies (max. 125A). The rectangular connectors are easy to handle during connection, assembly, installation, maintenance, and repair, while their flexibility minimizes inventory of components and parts. Modular rectangular connector Locking nut Signal, data and power transmission up to 90 contacts per connector up to 125A per contact compatible with EN4165 modules Rectangular connectors Modular system, broadband transmission, data transmission, fiber optic technology, power transmission, PCB connectors, signal transmission Locking nut Aviation, Urban Air Mobility, Unmanned Systems Power, signal, data connectors, Rectangular connectors - lightweight and space-saving, overmolded modules for RF (Quadrax, Triax, Twinax and Coax), fiber optic cable Arinc801, Lumiere, MPO, MTP) signal, data (RJ45, USB) and power supply (max. 125A) with standard crimp contacts (SAE-AS39029 / EN3155 AWG 23 to AWG 4) and PCB contacts straight or 90° available, EMC protection available: Electrically conductive housing surfaces ensure a shielding effect between plug, socket, backshell and braided shield of the cable against electromagnetic interference, Fire protection/smoke toxicity/toxicity are tested according to EN45545 (HL3 R22), protection class: IP66, operating temperature range: -55° to +175°C connector
    More
  • ABS 1152 | BACC65 / 3559
    ABS 1152 | BACC65 / 3559
    The 3559 Series connector is a single-module push-pull connector ideal for in-flight entertainment systems, cabin service systems, passenger service units (PSUs), and other cabling requirements where shielding is not required. Lightweight rectangular connector Push-pull locking Signal, data and power transmission Mono-Modular Connector: Compatible with all EN4165 (SIM) modules quick assembly to the structure up to 30 contacts per connector up to 125 current per contact Rectangular connector Modular system, broadband transmission, data transmission, fiber optic technology, power transmission, PCB connectors, signal transmission Push-Pull Aviation Aviation approved: ABS1152, Low weight thanks to robust thermoplastic, Mono-Modular connector: Compatible with all EN4165 (SIM) modules, Quick assembly on the structure thanks to three-point mounting system, Over-molded modules for RF (Quadrax, Triax, Twinax and Coax), fiber optic Arinc801, Lumiere, MPO, MTP) signal, data (RJ45, USB) and power supply (max. 125A) with standard crimp contacts (SAE-AS39029 / EN3155 AWG 23 to AWG 4) and PCB contacts straight or 90° available, Fire behavior/smoke development/toxicity according to ABD0031 and FAR 25.853, Fast push-pull locking, Temperature range: -55°C to +175°C connector
    More
  • EN 3545 / 1900 | 1900Elio
    EN 3545 / 1900 | 1900Elio
    The connectors are available in various pin configurations from 5 to 78 contacts and support conductor cross-sections from AWG22 to AWG8. They also allow the integration of coax, twinax, triax, and quadrax contacts from the MIL-DTL-38999 series. It consists of lightweight, robust composite materials and offers up to 36 different coding options to avoid confusion during installation. Thanks to their high sealing performance, low weight and compliance with fire protection, smoke and toxicity requirements according to ABD 031 and FAR 25.853, the EN 3545 / 1900 connectors are ideal for demanding applications in aviation and anywhere reliable connections are crucial. ABS 1696 / 1900ELIO (EN4531-101 compliant) High-performance rectangular connectors for optical applications The 1900ELIO series is a further development of the EN 3545 connectors and is specifically designed for use with optical Elio® contacts (Lumiere). Lightweight rectangular connector Locking nut Signal, data and power transmission Up to 78 contacts per connector Up to 50A current per contact Coax, twinax, triax and quadrax contacts or fiber optic terms Rectangular connectors for data transmission, fiber optic technology, power transmission, PCB connectors with locking nut for aviation, urban air mobility, and unmanned systems. These power, signal, and data connectors are suitable for aerospace and railway applications. They feature a lightweight and robust thermoplastic construction, a maximum current of 50A per contact at 20°C, and are compatible with copper and aluminum conductors as well as optical fibers. Overmolding provides excellent sealing properties. Operating temperature range: -55°C to +175°C. Fire protection/smoke toxicity/toxicity according to ABD 031 and FAR 25853 or EN 45545 (HL3 R22). Fluid resistance according to ABS1696 standard: fuels, hydraulic fluids, oils, cleaning fluids, de-icing fluids, and coolants.
    More
  • ABS 1019 / 3357
    ABS 1019 / 3357
    The 3357 Series connector is a compact push-pull connector for in-flight entertainment and lighting in aircraft cabins. The connector is available in various mixed pin configurations with AWG 20 and AWG 22. It is available with crimp or straight/angled solder contacts. lightweight rectangular connector Push-Pull locking signal and power transmission For quick installation on the structure max. 7.5A current per contact Contact size 20/22 Rectangular connectors for data transmission and signal transmission, push-pull aviation. Aviation approved: ABS 1019. Lightweight thanks to thermoplastic housing. Socket can be easily attached to the three-point mounting system on the mounting wall. Contact selection: crimp or printed circuit board contacts. Fire protection according to ABD 031 and FAR 25853. Temperature range: -55°C to +175°C. Push-pull locking. 5, 8 or 9 contacts per connector. Size 20/22 connector.
    More
  • ABS 0364 / 1720
    ABS 0364 / 1720
    The 1720 Series connector is a push-pull connector for in-flight entertainment, lighting, power, and other unshielded connections. lightweight rectangular connector push-pull locking signal and power transmission 10 or 26 contacts per connector max. 7.5A current per contact fixing directly on the structure Rectangular connectors for signal transmission and power transmission, push-pull, aviation. Approved for aviation: ABS 0364, lightweight and robust thermoplastic, fire protection/smoke toxicity are met according to ABD 031 and FAR 25853, socket can be easily attached to the three-point mounting system on the mounting wall, two versions: 10 and 26 contacts, size 20, temperature range: -55°C to +125°C connector
    More
  • MIL-DTL-55116 / 164
    MIL-DTL-55116 / 164
    The 164 Series includes waterproof 5- and 6-pin connectors for low-voltage audio applications. Featuring a three-point bayonet locking system and self-cleaning contacts, they enable quick disconnection and high reliability—ideal for military communications in harsh conditions. They are MIL-DTL-55116 approved and QPL listed. robust circular connector bayonet locking audio transmission 5 or 6 contacts per connector 3000 mating cycles Self-cleaning spring contacts Circular connectors for signal transmission, EMI/RFI protection, PCB connectors with bayonet defense. Operating temperature range: -55°C to +85°C, 500mA current per contact, contact resistance: max. 0.05 Ohm., 5 or 6 contacts per connector, 3000 mating cycles, bayonet locking, self-cleaning spring contacts, crimp, solder, or PCB connection, housing made of robust stainless steel.
    More
  • Amphenol Snap Rectangular / ASR
    Amphenol Snap Rectangular / ASR
    The ASR system is a well-designed concept for compact, high-performance, and easy-to-use snap-lock connectors. The ASR connector offers a solution with the highest priority given to space and weight savings, as well as shielding and sealing. It uses crimp contacts according to MIL-C-39029 standard and is also available with PCB contacts. The ASR series is ideally suited for use in in-seat systems, cabin service equipment, and in-flight entertainment systems. Compact trapezoidal connector Snap lock Signal and data transmission Up to 30 contacts per connector Max. 23A per contact Lightweight Trapezoidal connector (D-SUB) for data transmission, EMI/RFI protection, push-pull PCB connectors for aviation, unmanned systems, and urban air mobility. This signal connector (max. 7.5A) features a lightweight and robust thermoplastic construction, and a snap-lock mechanism for easy connection and disconnection, even blind mating. The connection can be made and released with just two fingers! Sealing is ensured by an interface seal and a grommet for cable sealing. Fire protection, smoke toxicity, and overall toxicity are compliant with ABD 031 and FAR 25853.
    More
  • EN4531, EN4165 compatible / Lumière
    EN4531, EN4165 compatible / Lumière
    The Lumière contact uses a proven 2.5 mm diameter ST-type ceramic sleeve, which can be installed in a size 16 cavity. This hermaphroditic contact can be installed in both plug and receptacle configurations. Furthermore, this contact can be used for single- and multimode applications. The contact is available in PC, APC, and UPC configurations. The Lumière contact is the counterpart to the ELIO™ connector. Elio™ is a registered trademark of Souriau. Fiber optic contact with strain relief for data transmission compatible with EN4531, EN4165 and ELIO™ Insertion loss: 0.3 dB (SM) or 0.2 dB (MM) Back reflection: -30 dB Connector accessories: backshells, caps, seals, and much more. Fiber optic technology for aviation, urban air mobility, and unmanned systems. Hermaphroditic contact, standard 2.5 mm ST type ferrule, easy access to the contact surface (for cleaning), single-mode and multimode compatible, direct strain relief on the contact allows use without a backshell, contact surfaces in PC, APC, and UPC available, insertion loss: 0.3 dB (single-mode) or 0.2 dB (multi-mode), back reflection: -30 dB for single-mode and multi-mode, compatible with EN4531, EN4165, and ELIO™ contacts.
    More
  • MIL-DTL-24308 / M2000
    MIL-DTL-24308 / M2000
    The M2000 series are subminiature connectors with a polarized housing and machined pin/socket contacts, ensuring high reliability and density. Their versatile design makes them suitable for a wide range of applications where weight and size are important. Amphenol M2000 series D-Sub connectors are MIL-DTL-24308 qualified and QPL listed. D-SUB connectors signal and data transmission up to 104 contacts per connector max. 7.5A current per contact large variety of types Trapezoidal connectors (D-SUB) Printed circuit board connectors, signal transmission, data transmission D-SUB Defence, aviation, industrial data and signal connectors (max. 7.5A), The trapezoidal shape of the housing ensures correct polarization, Temperature range: from -55°C to +125°C, High contact density: up to 104 contacts per connector Connectors
    More
  • RNJ / RNJLP
    RNJ / RNJLP
    The RNJ Rack&Panel connector is designed to connect electronic devices between a movable unit (rack) and a fixed unit. The RNJ Low Profile design offers a reduced distance between the panels, resulting in significant space savings. Robust connector Rack & Panel Data, signal and power transmission Up to 187 contacts in one connector Max. 500A current per contact Various high-speed contacts available Circular connectors with EMI/RFI protection, data transmission, fiber optic technology, power transmission, PCB connectors, signal transmission, scoop-proof rack & panel (blind mating), defense, aviation, urban air mobility. Power, signal, and data connectors (max. 500A). High contact density: up to 187 contacts per connector, ideal for space-constrained applications. Rack & panel locking: Connects easily and quickly by pushing. Locking must be ensured by a mechanical device on the system. Axial, angular, and longitudinal float capability. Contact protection: Protects the pin contacts from touch and damage during blind mating. Wide range of designs, pin configurations, and contacts, such as AWG crimp contacts for signal, power, and data; high-speed contacts; coax, twinax, quadrax, octomax, differential. Twinax and fiber optic terminals enable versatile applications, EMI/RFI protection, operating temperature range: -65°C to +175°C, protection class: IPx7 connectors
    More
  • ARINC 429 compatible / 2759
    ARINC 429 compatible / 2759
    Sealed distribution module of the 2759 series, for up to 6 Twinax contacts. The modules are snapped onto rails according to MBBN3495 (1750 series) and are designed for ARINC429 signals. Low frequency signal distribution module for up to 6 crimp contacts For signals in the range of 0-100KHz Fits 1750 rails for different Twinax cable types Amphenol Air LB product from our own production Broadband transmission, Amphenol Air LB product from our own production Aviation Suitable for twinax cables, Suitable for 1750 rails, Designed for ARINC429 signals, For signals in the range of 0-100KHz, Input/Output: 6 identical connection points, Protection class: IP67, Temperature range: from -55°C to +175°C Modules: Distribution module
    More
  • VG96975 (in approval) / 2M
    VG96975 (in approval) / 2M
    Amphenol's 2M series comprises four compact, robust connector lines for demanding applications with limited space and high performance requirements. Each series offers specific advantages depending on the application and environmental conditions. 2M801 with dual-start ACME thread for compatibility with existing systems 2M803 with bayonet locking mechanism for frequent, quick disconnection 2M804 as a push-pull variant for portable devices such as soldier systems 2M805 , a highly vibration-resistant tri-start thread solution compliant with MIL-DTL-38999 standard – at half the size and weight. (VG approved) Miniature circular connectors Push-pull, dual or tri-start Signal and data transmission Up to 130 contacts per connector Max. 23A per contact High contact density Circular connectors with EMI/RFI protection, filter connectors, PCB connectors, signal transmission, data transmission, hermetic push-pull connectors, bayonet, tri-start thread, dual-start thread, defense, unmanned systems, urban air mobility, aviation power, signal and data connectors (max. 23A, USB 2.0), micro-miniature circular connectors, high contact density: up to 130 contacts per connector, ideal for space-constrained applications, up to 71% weight savings compared to MIL-DTL-38999, up to 2000 mating cycles, contact options: crimp, solder, or PCB mounting contacts, interface seal: protects against electrolytic corrosion at the contacts, protection class: IPx7, operating temperature range: -65°C to +200°C
    More
  • VG95319-100, -101, -102 / MIL-PRF-83526_20A&21A / TacBeam
    VG95319-100, -101, -102 / MIL-PRF-83526_20A&21A / TacBeam
    These lens connectors with up to 4 channels are designed for use in harsh environments and for multiple connections over long distances. Thanks to their hermaphroditic locking mechanism, at least 3000 mating cycles are possible, and all housing types are interchangeable. The lenses are easy to clean, making them ideal for outdoor use. The connectors are available for multimode and single-mode applications. Lens circular connector Hermaphroditic locking Fiber-optic data transmission 2 or 4 channels 3000 mating cycles Multimode or single-mode Amphenol Air LB product with VG approval, circular connector. Amphenol Air LB product with VG approval, data transmission, fiber optic technology. Amphenol Air LB product with VG approval, hermaphroditic (threaded). Defense, marine, industrial. Optical data connector, 2 or 4 channels, multimode and single-mode, beam-expanding lenses, hermaphroditic locking mechanism, min. 3000 mating cycles, return loss: >34dB, operating temperature range: -46°C to +71°C. Connectors
    More
  • VG96513 | EN4165 | ARINC 809 / SIM Series II & III
    VG96513 | EN4165 | ARINC 809 / SIM Series II & III
    The SIM series is a modular rectangular, multi-contact, and multi-function connector. The wide variety of modules and configuration options for diverse applications ranges from RF contacts (Quadrax, Triax, Twinax, and Coax) and fiber optic terminations for signal and data transmission to power supply (max. 125A per contact). The rectangular connectors are easy to handle when connecting, assembling, installing, maintaining and repairing, while their flexibility reduces the stock of components and parts to a minimum. The lightweight and space-saving enclosures are available for 1 module push-pull connector made of composite (ARINC 809) 2 or 4 modules as free connection with click nut locking or rack and panel connection made of aluminum alloy, marine bronze or composite Custom-made panels Splices Contact-protected requirements: SIM III Modular rectangular connector Rack & Panel, cable mounting with locking nut or push-pull Signal, data and power transmission up to 120 contacts per connector max. 125A per contact enormous variety of modules and configuration options Amphenol Air LB product with VG approval, rectangular connector. Amphenol Air LB product with VG approval, data transmission, EMI/RFI protection, fiber optic technology, power transmission, PCB connectors, modular system, signal transmission, contact-protected (scoop-proof), rack & panel (blind mating), locking nut, push-pull, quick-release defense, aerospace, marine, urban air mobility, unmanned systems. Power, signal, and data connectors, rectangular connectors – lightweight and space-saving. Modular system enables 230,000 different contact configurations. Overmolded modules for RF (Quadrax, Triax, Twinax, and Coax), fiber optics (Arinc801, Lumiere, MPO, MTP), signal, data (RJ45, USB), and power (max. 125A) with standard crimp contacts (SAE-AS39029 / EN3155 AWG 23 to AWG 8). PCB contacts available straight or 90°, available as standard with mono, 2 and 4 openings or with customized configurations, EN 4165 specification comparable in performance to US MIL-STD-810, fire resistance/smoke toxicity/toxicity compliant with ABD 031 and FAR 25853, Marine Bronze: 2,000-hour salt spray test, splices: with or without cable clamp/flange, flexible mounting options: on, under or through structures as well as on cable bundles. Ideal for in-seat wiring and quick installation. EMI/RFI protection, protection rating: IP67, operating temperature range: -55°C to +125°C connectors
    More
  • VG96976 (in approval) / Rhino
    VG96976 (in approval) / Rhino
    The single-pole RHINO power connector for high currents (max. 1000 A) and high voltages (max. 875 VAC) is particularly suitable for power supply applications in harsh environments and offers maximum user safety. The contacts provide various connection options for crimping wires up to 240 mm², for use with cable lugs, or for connection to busbars. The robust connectors with Tri-Start thread locking are easy to handle during assembly and wiring. VG96976 in approval Robust single-pole circular connector Tri-Start locking High-current power transmission Single-pole power connector Max. 1000A current per contact Max 1238Vdc operating voltage Circular connectors with EMI/RFI protection, power transmission, filter connectors, hermetic connectors with tri-start threads for defense, marine, industrial, urban air mobility, and unmanned systems. High-current applications: max. 1000A, high-voltage applications: max. 875V AC, touch protection: user safety, IP2X protection rating, contact type: crimp, lug, or busbar connection, crimp contacts for cable sizes from 6mm² to 240mm², easy assembly and processing without special tools, special versions such as hermetically sealed junction boxes or filter connectors available on request, operating temperature range: -55°C to +150°C.
    More
  • VG95234 | VG95324 &/ MIL-DTL-5015 based | GCA
    VG95234 | VG95324 &/ MIL-DTL-5015 based | GCA
    The GCA series is used for power and signal transmission and is available with threaded or reverse bayonet locking. The GCA series is one of our most diverse series. GCA connectors come standard with a screw lock, silver-plated solder contacts, and nickel-plated aluminum alloy housings. Robust circular connector Reverse bayonet / screw thread Signal and power transmission Up to 61 contacts per connector Max. 245A current per contact Wide variety of types Industrial applications Amphenol Air LB product, manufactured in-house, circular connectors for power and signal transmission, PCB connectors, Amphenol Air LB product manufactured in-house, EMI/RFI protection, reverse bayonet, threaded, industrial signal and power transmission (max. 245A), robust housing, wide range of types, RoHS compliant, locking options: reverse bayonet or screw thread, contact options: solder contacts, metric and AWG crimp contacts, contacts for PCB connection, EMI/RFI protection, protection class: IP68 (1 bar/16h), operating temperature range: -55°C to +125°C connectors
    More
  • ABS1144 / 3308
    ABS1144 / 3308
    Series 3308 spacers comply with the ABS1144 standard.The seperators are used to maintain the required distance between two parallel or crossing cable bundles. EWIS Management Spacers / Seperators Thermoplastic Easy installation Available in 3 sizes: 25mm, 50mm or 75mm For two parallel or intersecting cable bundles Amphenol Air LB product manufactured in-house. Fastening & Guiding Solutions (EWIS): Clamps, Positioners, Brackets. Amphenol Air LB product manufactured in-house. Aerospace, Defense, Industrial, Electric Air Mobility. Aerospace approval, qualified to Airbus standard ABS1144. Available in 3 spacings: 25mm, 50mm or 75mm. Lightweight and environmentally resistant thermoplastic. Shock and vibration resistance: according to DO160D paragraphs 7 and 8. Easy installation for cable diameters up to 45mm with cable ties. Temperature range: from -55°C to +130°C. Pipe holders & cable management: Spacers.
    More
  • VG96936-10 & / VG96927-9
    VG96936-10 & / VG96927-9
    The flat braided copper conductors are used as flexible protective conductors for grounding a housing in many areas, such as in military vehicles. Metallic braided conductors sold by the meter or assembled with cable lug Nominal cross sections available from 1.5mm² to 120mm² assembled with cable lugs with 60mm to 450mm length Amphenol Air LB product with VG approval. Protective conductor Defense optionally tinned or nickel-plated, available in various nominal cross sections from 1.5mm² to 120mm², VG96936-10: copper braid sold by the meter, VG96927-9: copper braid pre-assembled with VG96933 cable lugs, with various VG96933 cable lug sizes with mounting holes from 6.5mm to 13.5mm, length from 60mm to 450mm protective conductor
    More
  • VG96953-13 / CDEH
    VG96953-13 / CDEH
    The rectangular metal strip connectors made of stainless steel are used for grounding or power distribution in many areas, such as in military vehicles, and are also suitable for the maritime market thanks to their corrosion-resistant material. Grounding metal strip stainless steel (V4A) with low resistance for earthing or power distribution different widths and lengths available Amphenol Air LB product with VG approval Busbar power transmission, Amphenol Air LB product with VG approval, grounding defense, marine, eVTOL Environmentally resistant for outdoor use: X2CrNiM017-12-2 (1.4404 stainless steel V4A) according to DIN EN 10088-3 Low ohmic resistance, depending on size: 2.4 to 19.17 mOhm Four different shapes available: A - 16 mm wide, mounting hole dia. 6.6 mm B - 18 mm wide, mounting hole dia. 9.0 mm C - 25 mm wide, mounting hole dia. 11.0 or 13.5 mm D - 36 mm wide, mounting hole dia. 11.0 or 13.5 mm Busbar
    More
  • VG96977 (pending approval) / GTB | GMTB
    VG96977 (pending approval) / GTB | GMTB
    GTB/GMTB lens connectors with up to 12 channels are designed for use in harsh environments and for multiple connections over long distances. Thanks to their hermaphroditic locking mechanism, at least 3000 mating cycles are possible, and all housing types are interchangeable. The lenses are easy to clean, making them ideal for outdoor use. The connectors are available in multimode, single-mode, and dual-mode versions. The GMTB series is the miniature version of GTB. Lens circular connector Hermaphroditic locking Fiber-optic data transmission 2, 4, 8 or 12 channels 3000 mating cycles Multimode, single-mode or dual-mode Amphenol Air LB product, manufactured in-house, circular connector for data transmission, fiber optic technology, Amphenol Air LB product, manufactured in-house, hermaphroditic (threaded), defense, industrial optical data connector, GTB: 2, 4, 8 or 12 channels, GMTB: 2 or 4 channels, multimode, single-mode or dual-mode, beam-expanding lenses, hermaphroditic closure, min. 3000 mating cycles, return loss: >31dB, protection class: IP67, operating temperature range -55°C to +85°C connectors
    More
  • MIL-DTL-5015 based / GCA-B
    MIL-DTL-5015 based / GCA-B
    The GCA-B series of connectors with reverse bayonet locking is plug-compatible with VG95234 / GCB-B and MIL-DTL-5015. It has the same technical design as VG95234 / GCB-B, except for the contacts, contact inserts and contact arrangements, which are based on MIL-DTL-5015. The GCA-B series will be replaced by GCA in the long term and should therefore not be included in the design for new projects. Robust circular connector Reverse bayonet locking mechanism Signal and power transmission Up to 52 contacts per connector Max. 125A current per contact Wide variety of types Amphenol Air LB product, manufactured in-house, circular connectors for power and signal transmission, EMI/RFI protection, reverse bayonet industrial circular connectors for signal and power transmission (max. 125A), wide range of configurations, reverse bayonet locking mechanism, contact options: AWG crimp contacts or solder contacts, protection rating: up to IP67, operating temperature range: -55°C to +125°C
    More
  • VG Connectors /and accessories
    VG Connectors /and accessories
    Amphenol-Air LB's VG products are approved according to the German Armed Forces' defense equipment standard. They provide reliable power, data, and signal connectivity in harsh environments for critical systems that must not fail under any circumstances. The stringent requirements and tests of the defense equipment standard ensure quality in areas such as functionality, reliability, durability, and safety. Applications worldwide, with their diverse environments (e.g., high humidity, contact with various liquids, dirt or dust, coastal areas with salty air or deep-sea waters, high altitudes or extreme temperatures, heavy mechanical stress, long operating times), demand particularly robust materials. Sensitive communication systems require EMC protection, and in field conditions, the connectors must also withstand shocks and vibrations. Amphenol-Air LB is one of the strongest partners of the defense industry. In close collaboration with companies in the sector, we develop innovative products that meet the challenges of the future. As a global market leader in connectors, Amphenol-Air LB offers a comprehensive range of approved VG connectors, manufactured at our Saarlouis site. Product overview of approved components, defense equipment standard For critical systems in harsh environments Amphenol Air LB product with VG approval: Circular connectors, rectangular connectors, busbars, protective conductors, connector accessories: end housings, caps, seals, etc., cables: by the meter, patch cables, cabling for power transmission, signal transmission, data transmission, fiber optic technology, hermetic connectors, bulkhead feedthroughs, modular systems, PCB connectors, EMI/RFI protection, Amphenol Air LB product with VG approval: bayonet, reverse bayonet, tri-start thread, threaded, magnetic, rack & panel (blind-mating), hermaphroditic (threaded), locking nut defense, marine corrosion resistant, protected against strong vibration and shock, protected against electromagnetic interference, high-quality finishes such as marine bronze (version B) or aluminum alloy, zinc-tin coated and/or black anodized surface, electrically conductive shield termination system (version J), various
    More
  • VG96940-6/AALB-FSPL | D-SUB-*-Y3-
    VG96940-6/AALB-FSPL | D-SUB-*-Y3-
    Our electrically conductive gaskets offer excellent shielding characteristics against electromagnetic interference and maximum protection against moisture and dirt. They are also resistant to aggressive liquids such as oil or kerosene.Our gaskets consist of fluorosilicone and a homogeneous mixture of electrically conductive fillers such as silver-plated aluminum particles (version A) or nickel-carbon particles (version B).Both material versions pass the environmental test according to IEC 60068-2-52 / DIN EN 60068-2-52 (salt spray, cyclic). Electrically conductive gasketsEMC protectionDirt and moisture protection Frequency range: 15KHz to 4GHz Shielding properties up to ≥ 80 dB Suitable for a wide range of connector series and designs Amphenol Air LB product with VG approval seals EMI/RFI protection, Amphenol Air LB product with VG approval Defence, Aviation, Marine, Industry, Urban Air Mobility, Unmanned Systems Protection against electromagnetic interference, dirt and moisture, Our seals are suitable for the following connector standards / series: MIL-DTL-5015 / SAE-AS50151, MIL-DTL-26500, MIL-DTL-26482 I & II, MIL-DTL-38999 I, II & III, MIL-DTL-83723 II & III, VG95234, VG95342, VG95328, VG96912, VG96513, VG95319-1006,-1007, -1008, -1016, EN4165, EN3645, JN1003, JN1034, GCA, GCA-B, GCB-B, GCB-M, SJT, SIM2, PT, TV, CTV, TV-SIM, LJT. Our seals are suitable for the following designs: Sockets with square flange, front or rear mounting; Sockets with single-hole mounting; Protective caps; Rectangular connectors; Trapezoidal D-SUB connectors, special shapes on request, EMI/RFI protection; Frequency range: 15KHz to 4GHz; Shielding properties: Version A: ≥ 80 dB; Version B: ≥ 70 dB, Temperature range: -55°C to +160°C. Seals Amphenol-Air LB flagship product.
    More
  • VG95319-1011 / BVG
    VG95319-1011 / BVG
    End housings form the pressure-tight seal of a connector and offer protection against electromagnetic interference, moisture, and dirt. The strap fastening also provides strain relief. End housing EMC protection Dirt and moisture protection Pressure-tight 1 bar/48h Wide selection of cable outlets Various materials and surfaces Amphenol Air LB product manufactured in-house, Amphenol Air LB product with VG approval. Connector accessories: end housings, caps, seals, and much more. EMI/RFI protection, Amphenol Air LB product manufactured in-house, Amphenol Air LB product with VG approval for Defense, Marine, Industrial, Urban Air Mobility, Unmanned Systems. The VG95319-1011 end housings are suitable for the following connectors: VG95319-1006, -1007, -1008, -1016 / MIL-DTL-38999 Series III / Amphenol TV/CTV. The end housings are available in various configurations: ribbon termination / clamping cone (SQ) / for shrink-fit parts / straight or angled. A wide range of cable exits are available. Various materials and finishes are offered. EMI/RFI protection is provided. The temperature range for cadmium aluminum alloy, zinc-nickel, zinc-tin and/or black anodized, and marine bronze finishes is -55°C to +175°C. The temperature range for nickel-plated aluminum alloy and stainless steel finishes is -55°C to +260°C. Pressure-tight. 1 bar/48h between the connector and the end housing bayonet, end housing, bronze, zinc-tin end housing
    More
  • VG95319-1015 A / (Bands)
    VG95319-1015 A / (Bands)
    The tapes are used to attach a shielding braid or similar to the end housing to protect against electromagnetic interference, moisture and dirt as well as to provide strain relief. Tape for attaching a shielding braid EMC protection Strain relief suitable for VG95319-1011 and M85049 end housings passivated stainless steel Temperature range: -46°C to 200°C Amphenol Air LB product with VG approval Connector accessories: backshells, caps, seals, and much more. EMI/RFI protection, Amphenol Air LB product with VG approval Defense, Industry, Aviation, Unmanned Systems, Marine, Urban Air Mobility The VG95319-1015 fastening bands fit, among others, the following backshells: , VG95319-1011A / BUVGSRA , VG95319-1011B / BUVGARB , VG95319-1011D / BLVGSRD , VG95319-1011G / BLVGSRG , VG95319-1011H / BLVGARH, Material: passivated stainless steel, Temperature range: -46°C to +200°C bands
    More
  • VG96927T018 Type B, C, D / GPC
    VG96927T018 Type B, C, D / GPC
    CAT.6a Ethernet patch cable compliant with VG for reliable 10 Gbps high-speed data transmission. The patch cable is designed to meet the high performance requirements of the VG specifications. Patch cable RJ45 connector and Ethernet cable 10GBit/s data transmission Data transmission in harsh environments UV-resistant and halogen-free Up to max. 90m 10 Gigabit Ethernet Class EA 500MHz patch cable","Cable structure: S/FTP 4 x 2 x AWG 26","UV-resistant and halogen-free","Molded strain relief including kink protection, straight, 45° or 90° version (thermoplastic UL QMFZ8)","RJ45 connector according to VG96938-03Z1","CAT.7 Ethernet cable from Amphenol according to VG95218T031B001","Cable assembly according to the requirements of VG96927","RoHS compliant","Operating temperature range: -40°C to +85°C","VG approval"
    More
  • ABS1145 | ASNE0237/DHS715-113 | EPC
    ABS1145 | ASNE0237/DHS715-113 | EPC
    The high-quality subminiature D connectors are primarily designed for applications where sealing, reliability, space and weight are of great importance. The connectors are compatible with the standards: UTE C 93-425, Type HE 508 MIL-C-24308 - DEF 5935; Pattern 110, IEC Recommendation 48B Sealed trapezoidal connectors (D-SUB) signal and data transmission max. 50 contacts per connector max. 7.5A current per contact Amphenol Air LB product from our own production trapezoidal connector (D-SUB) signal transmission, data transmission, Amphenol Air LB product from our own production D-SUB aviation, unmanned systems, urban air mobility data and signal connectors (max. 7.5A), available in 5 housing sizes: A/B/C/D/E or 9, 15, 25, 37 and 50 pins, male and female, suitable for M39029 / EN3155 size 20 crimp contacts, AWG 24-18, the trapezoidal shape of the housing ensures correct polarization, the connectors are optionally equipped with a single wire seal and the pin side additionally with an interface seal to protect against electrolytic corrosion on the contacts, EPC connectors are compatible with the following standards: UTE C 93-425, Type HE 508 MIL-C-24308 - DEF 5935; Sample 110 IEC Recommendation 48B, temperature range -65°C to +150°C, protection class: IP66 / IP68 connector
    More
  • EN61984 / ECTA 133 | 233 | 633
    EN61984 / ECTA 133 | 233 | 633
    The x33x series of metal connectors with push-pull locking system is used wherever quick and secure connection is required. It is particularly suitable for industrial applications, such as robotics, equipment manufacturing, and vehicle construction. Housings made of stainless steel or brass are especially robust and durable, meeting very demanding environmental requirements. Pressure-tight sockets are available in a variety of pole configurations. Metal circular connectors Push-pull locking mechanism Signal and power transmission Up to 4+PE (x331) or 41 (x332) contacts per connector Max. 40A current per contact Protection against contact 1000 mating cycles Amphenol Air LB product of our own manufacture Circular connectors Power transmission, signal transmission, EMI/RFI protection, Hermetic connector, Bulkhead feedthrough, PCB connectors, Amphenol Air LB product of our own manufacture Push-Pull Industrial Series x331: Power connector (max. 40A) with leading ground contact conductively connected to the connector housing. (PE contact), Series x332: Signal connector for transmitting signals and data, as well as low-voltage power supply connector (max. 25A), min. 1000 mating cycles, push-pull quick-locking mechanism, easy assembly, touch protection, contact options: Series x331: solder or crimp contacts, Series x332: solder, crimp, thermocouple, or PCB connection contacts, operating temperature range: -40°C to +125°C, protection class up to IP67, EMI/RFI protection. Amphenol-Air LB flagship connector.
    More
  • EN61984 / ECTA 544
    EN61984 / ECTA 544
    The ECTA 544 Series connector with push-pull locking system is used wherever quick and secure mating is required. The connectors are durable and cost-effective. The series is characterized by simple handling and maintenance thanks to easy-to-install housings and contacts. Thermoplastic round connectors Push-Pull locking Signal and power transmission up to 27 contacts per connector up to max. 25A current per contact 1000 mating cycles 1000 hours salt spray test duration Amphenol Air LB product from our own production Circular connectors Power transmission, Signal transmission, Amphenol Air LB product from our own production Push-Pull industrial signal, data and low voltage connection up to max. 25A, With leading ground contact, 1000 mating cycles, Robust thermoplastic: 1000 hours salt spray test, Push-Pull quick locking, Easy assembly, Contact selection: Turned or stamped-rolled contacts possible, Protection class IP67, Temperature range -40°C to +125°C Connector
    More
  • VG96934 (pending approval) / GCC
    VG96934 (pending approval) / GCC
    The 10-pin audio connectors are designed to deliver the highest performance under harsh conditions. Typical applications include communication systems and radio equipment. Spring contact technology ensures excellent contact resistance and an efficient self-cleaning function of the contacts. durable 10-pin circular connector Reverse bayonet locking Audio transmission 10-pin audio connector 5000 mating cycles Spring contacts Amphenol Air LB product from our own production Circular connectors Signal transmission, PCB connectors, Amphenol Air LB product from our own production, EMI/RFI protection Reverse bayonet Defense audio connector, 10 pin, Hard gold-plated spring contacts: excellent contact resistance and efficient self-cleaning, Extreme durability: 5000 mating cycles, Contact protection: Protects the pin contacts from contact and damage (e.g. when blind mating), Contact selection: Solder contacts or contacts for PCB connection, Temperature range -57 °C to +85 °C Connector
    More
  • VG96929 / GCE
    VG96929 / GCE
    The single-pole GCE / VG96929 connectors are suitable for high currents (max. 950A) at low voltages (max. 50VDC / 75VAC). The shells with reverse bayonet locking are EMC protected, vibration-resistant, and robust against environmental influences. Robust single-pole circular connectorReverse bayonet lockingHigh-current power transmission single-pole power connector max. 950A current per contact for cables from 25mm² to 240mm² Amphenol Air LB product from our own production, Amphenol Air LB product with VG approval Circular connector power transmission, zinc-tin (J), Amphenol Air LB product from our own production, EMI/RFI protection, Amphenol Air LB product with VG approval Reverse bayonet Defense, Industry, Marine, Urban Air Mobility, Unmanned Systems High current applications: max. rated current 950A at 20°C ambient temperature, Reverse bayonet locking, Easy processing without special tools, For cable sizes according to DIN 46438 from 25mm² to 240mm² and cables according to VG95218T025/T026, Contacts for crimping or as threaded bolt contact, Water pressure resistant IPX8 (1bar/16h), Temperature range -55°C to +150°C Connector
    More
  • VG96955 (pending approval) / GCB-M
    VG96955 (pending approval) / GCB-M
    These connectors combine the advantages of circular connectors with the versatility of a SIM module connector. The housings with reverse bayonet locking are EMC protected, vibration-resistant, robust against environmental influences, and compatible with a wide variety of modules. (These are sold separately.) For the VG95234 (GCB-B) size 32 housing, Amphenol-Air LB has developed an insert to accommodate EN4165/VG96513 (SIM series) modules and EN3155 contacts (M39029). The variety of modules and configurations for diverse applications ranges from 125A power contacts to optical data transmission. Modular circular connector Reverse bayonet locking mechanism Signal, data and power transmission Up to 120 contacts per connector Max. 125A current per contact For accommodating 4x EN4165 modules for AWG 23-8 crimp contacts, PCB contacts, coax, twinax, diff. twinax, quadrax, fiber optic terminals, ARINC801, Lumiere, USB, MPO, MTP, RJ45 connectors Amphenol Air LB product, manufactured in-house, circular connectors for power transmission, signal transmission, data transmission, fiber optic technology, modular system, PCB connectors, EMI/RFI protection, Amphenol Air LB product, manufactured in-house, reverse bayonet, industrial, marine, defense, modular system enables 230,000 different contact configurations, to accommodate 4x EN4165 modules for AWG 23-8 crimp contacts, PCB contacts, coax, twinax, diff. twinax, quadrax, fiber optic terminals, ARINC801, Lumiere, USB, MPO, MTP, RJ45 connectors, contacts for PCB connection, straight or 90° angled, reverse bayonet locking, protection class: IP67, operating temperature range: -55°C to +125°C connectors
    More
  • VG95234 / AA95234 / GCB-B
    VG95234 / AA95234 / GCB-B
    Reverse bayonet locking connectors are suitable for a wide variety of applications thanks to the large number of versions, designs, end housings, contacts, and pin configurations. They are suitable for signal and power transmission up to 245A in harsh environments. Robust circular connector Reverse bayonet locking mechanism Signal and power transmission Up to 61 contacts per connector Max. 245A current per contact Wide variety of types Amphenol Air LB product, manufactured in-house, Amphenol Air LB product with VG approval, circular connector for power transmission, signal transmission, EMI/RFI protection, Amphenol Air LB product, manufactured in-house, Amphenol Air LB product with VG approval, reverse bayonet connector for defense, marine, and industrial applications, signal and power transmission (max. 245A), special pin configuration 32A8 to 400VAC / 63A according to DIN EN61984 (VDE0627), contact options: metric or AWG crimp contacts, wide range of configurations, EMI/RFI protection, protection class: IPx8 (1 bar/16h), operating temperature range: -55°C to +125°C, power, signal, EMI, EMC, VG, bayonet connector
    More
  • VG95328 / AA95328 / PT
    VG95328 / AA95328 / PT
    These compact miniature connectors feature a robust housing with bayonet locking and are suitable for signal and power transmission. The 16-2/xx solder pin configurations are rated for currents up to 40A. Compact & robust circular connector bayonet locking mechanism Signal and power transmission Up to 61 contacts per connector Max. 40A current per contact AWG crimp contacts, solder-in contacts or wound contacts Amphenol Air LB product, manufactured in-house, Amphenol Air LB product with VG approval, circular connectors for power transmission, signal transmission, EMI/RFI protection, hermetically sealed connector, bulkhead feedthrough, PCB connector, Amphenol Air LB product, manufactured in-house, Amphenol Air LB product with VG approval, bayonet, defense, marine, industrial signal connectors (max. 13A), solder pin patterns 16-2/xx up to max. 40A (replacement for Schaltbau pin patterns), high contact density: up to 61 contacts per connector, ideal for small-space applications, five guide slots for easy mating, contact options: AWG crimp contacts, PCB terminal contacts or wire-wound contacts, EMI/RFI protection, protection class: IPx8 (0.2 bar/48h), temperature range: -55°C to +125°C, bayonet, end housing, bronze, zinc-tin connectors
    More
  • VG96912 / AA96912 / SJT
    VG96912 / AA96912 / SJT
    These miniature connectors with high contact density feature 100% contact protection. The bayonet-lock housings are EMC-protected and robust against environmental influences. Compact & robust circular connector bayonet locking mechanism Signal, data and power transmission Up to 128 contacts per connector Up to a maximum current of 23A per contact Data connector (10Gbit/s) Contact protection & interface sealing Amphenol Air LB product manufactured in-house, Amphenol Air LB product with VG approval, circular connector for signal transmission, data transmission, hermetic connector, PCB connector, Amphenol Air LB product manufactured in-house, EMI/RFI protection, fiber optic technology, Amphenol Air LB product with VG approval, contact-protected (scoop-proof), power transmission, bayonet, defense, marine, industrial signal and power connectors (max. 23A), data connector: pin configuration 12-35 is tested up to CAT6A (10Gbit/s according to DIN EN 50173-1, up to 500 MHz), tested up to 2 x USB 3.0 / HDMI 1.4 / DVI-D / 2 x CAT6, high contact density: up to 128 contacts per connector, ideal for applications in confined spaces, contact protection: protects the pin contacts from touch and damage (e.g., during blind mating), lightweight aluminum housings or particularly robust Marine bronze housing, interface seal: protects against electrolytic corrosion at the contacts, five guide slots for effortless mating, contact options: AWG crimp contacts, PCB connection contacts, or wound contacts, EMI/RFI protection, protection class: IP68 (0.2 bar/48h), operating temperature range: -65°C to +175°C, bayonet, end housing, bronze, zinc-tin connector
    More
  • VG96944 / Powersafe
    VG96944 / Powersafe
    The VG96949/Powersafe power connectors with Tri-Start threaded locking are EMC protected and robust against environmental influences. These connectors are particularly suitable for power supply (max. 100A/1000V) in harsh environments and offer maximum safety for the user. Robust circular connector Tri-Start thread locking mechanism Secure power transmission Max. 100A current per contact Max. 1000V operating voltage Pilot Contact (LMFB) Grounding contact (FMLB) Protection against contact - safety for the user Amphenol Air LB product with VG approval, circular connector, power transmission, EMI/RFI protection, Amphenol Air LB product with VG approval, Tri-Start thread, Defense, Industry, Marine, Urban Air Mobility, Unmanned Systems, high-current applications max. 100A / 500V, touch protection: user safety, trailing pilot contact (LMFB), leading ground contact connected to the housing (FMLB), five guide slots for easy mating, protection class: IP28, operating temperature range -65°C to +200°C connectors
    More
  • VG95319-1016 K,L,M / TV-SIM | CTV-SIM
    VG95319-1016 K,L,M / TV-SIM | CTV-SIM
    TV-SIM / CTV-SIM connectors combine the advantages of a circular connector with the versatility of a SIM module connector. Based on housings conforming to MIL-DTL-38999 Series III or VG95319-1006, -1007, -1008, -1016 (TV/CTV series), Amphenol-Air LB has developed a special insert that enables the integration of SIM modules compliant with EN4165 (VG96513) as well as EN3155 contacts (M39029). The housings feature a tri-start thread locking mechanism, are EMC-shielded, vibration-resistant, and offer reliable protection against harsh environmental conditions. The adapter inserts are compatible with a wide range of common SIM modules, thus enabling flexible, application-specific configurations. Modular circular connector Tri-Start thread locking mechanism Signal, data and power transmission Up to 30 contacts per connector Max. 125A current per contact 90° PCB contacts possible in a circular connector Diverse fiber optic connection options Amphenol Air LB product, manufactured in-house, Amphenol Air LB product with VG approval, circular connectors for power transmission, signal transmission, data transmission, fiber optic technology, modular system, PCB connectors, Amphenol Air LB product, manufactured in-house, EMI/RFI protection, Amphenol Air LB product with VG approval, Tri-Start thread, suitable for defense, aviation, industry, marine, urban air mobility, compatible with VG 96513-5 (EN4165/SIM) contact inserts, for example, crimp contacts AWG 4-23 for power, signal, data or RJ45, Coax, Quadrax, ARINC801, Lumiere, MPO, MTP, USB, etc., contacts for PCB connection, straight or 90° angled, five guide slots for easy mating, EMI/RFI protection, protection class: IP67, temperature range: -55°C to +175°C connectors
    More
  • VG95319-1006, -1007, -1008 / VG95319-1016 A, B, C, G, H, N / MIL-DTL-38999 III | EN3645 / TV | CTV
    VG95319-1006, -1007, -1008 / VG95319-1016 A, B, C, G, H, N / MIL-DTL-38999 III | EN3645 / TV | CTV
    The subminiature connectors with high contact density feature 100% contact protection. The housings with Tri-Start thread locking are EMC protected and robust against environmental influences. Thanks to the wide range of approvals, designs (material/surface), construction styles, pin configurations, and contacts, this series enables the widest spectrum of applications, for example, in defense equipment, aerospace, and industrial applications. Robust and lightweight circular connector Tri-Start thread locking Signal, data and power transmission up to 187 contacts in one connector up to 230A current per contact large variety of types various high-speed contacts available Amphenol Air LB product from our own production, Amphenol Air LB product with VG approval Circular connectors Power transmission, Signal transmission, Data transmission, Printed circuit board connectors, Filter connectors, Hermetic connectors, Broadband transmission, Fiber optic technology, Marine Bronze (B), Zinc-Tin (J), EMI/RFI protection, Amphenol Air LB product from our own production, Amphenol Air LB product with VG approval, Bulkhead feedthrough, Contact protected (Scoop-proof) Tri-Start thread Defense, Aviation, Industry, Marine, Space, Unmanned Systems, Urban Air Mobility Power connectors: up to 230A, Signal connectors, Data connectors: The pin layout 13-35 is tested up to CAT6A (10Gbit/s according to DIN EN 50173-1, up to 500 MHz), High contact density: up to 187 contacts per connector, ideal for applications in small spaces, Lightweight housings made of composite or aluminum or particularly robust housings made of stainless steel or Marine Bronze, Interface seal: Protects against electrolytic corrosion on the contacts. Contact protection: Protects the pin contacts from contact and damage (e.g. during blind mating). Five guide grooves for effortless mating. Tri-start thread locking. A wide selection of designs, pin configurations and contacts, such as AWG crimp contacts for signal, power and data, high-speed contacts, coax, twinax, quadrax, octomax, diff. twinax, thermocouples and fiber optic terminations as well as MPO connectors enables versatile applications. Connectors with EN3645 qualification must meet higher lightning protection requirements (up to 15kA) and are suitable for aluminum cables, among other things. Special designs are available, for example lanyard connectors, hermetically sealed receptacles, filters or stand-off (double flange) sockets and integrated backshells. Protection class: IP68 (0.2 bar/48h). Operating temperature range: -65°C to +200°C. Connector
    More

Modular Solutions

  • Modules & Rails / Splices
    Modules & Rails / Splices
    We offer a wide range of distribution and quick-junction modules for sealed connections. They allow you to optimize your wiring architecture: cable length, weight, and space. Mounting the modular connections on metal or plastic mounting rails is quick and easy. Our product range includes: Series 1750, 1758, 1765, 1130, 1100, 1174, 1119, 1200 BACC50 / BDX series MIL-T 81714 Quick connectors, modules and rails For distribution or earthing compact design high tightness quick connection Relay sockets, quick connectors, modules and rails Defense, Aviation, Urban Air Mobility, Unmanned Systems compact design, high contact density, high tightness, secure connection of crimp contacts for cables from AWG24 to AWG12 and electronic components, for details see section "Technical Information" Quick connectors, modules and rails
    More
  • Power Distribution Rails
    Power Distribution Rails
    Amphenol busbars provide a means of power distribution between power generation units, terminal blocks, and smaller terminal connections. Busbars are available in various standard sizes and shapes, as well as custom designs. Busbars are characterized by high mechanical strength and can tolerate high temperatures. Busbars for power distribution Standard sizes or customized for high currents Busbar Power Transmission Defence, Aviation, Urban Air Mobility, Unmanned Systems Military and aviation approved materials, Lightweight aluminum or copper, Up to 1200A as standard, Perfectly suited for customized designs, we support you with: , Weight/volume optimization, Thermal simulation, Electrical insulation simulation, Partial discharge simulation, Many technologies are available:, Rigid or flex busbars or flex braids, Integration of bolts, quick-assembly fixing points, fixing holes, connecting elements, Specific marking/identification, Insulation/lamination Power distribution busbars
    More

High Speed & Fiber Optic Solutions

  • MRC Multi-Media / Ruggedized Connectors
    MRC Multi-Media / Ruggedized Connectors
    The MRC series is a micro-miniature solution ideal for communication systems with Gigabit Ethernet, USB 2.0/USB 3.0, HDMI and 10 Gigabit Ethernet in the smallest of spaces and is also available pre-wired. Miniature circular connectors Push-Pull or 1/4 Twist-Lock Signal and data transmission Ethernet, USB 2.0/3.0, HDMI and 10 Gigabit easy-to-clean spring contacts 2000 mating cycles Circular connectors, cables: sold by the meter, patch cables, harnesses, broadband transmission, data transmission, printed circuit board connectors, signal transmission, push-pull, 1/4 twist-lock defense, aviation, urban air mobility, unmanned systems, Ethernet, USB 2.0/3.0, HDMI and 10 Gigabit circular connectors, spring contact technology for easy cleaning - ideal for applications in harsh environments, push-pull or 1/4 twist-lock locking, 2000 mating cycles, 9 or 19 contacts per connector, operating temperature range: from -20°C to +75°C, or -55°C to 105°C circular connectors and harnesses
    More
  • ARINC 801 / M801
    ARINC 801 / M801
    ARINC 801 - Fiber optic data transmission in a rugged, contact-protected D38999 housing, with guide pins for precise alignment and a mating-safe housing design. The hermaphroditic M801 1.25mm termini feature a removable alignment sleeve holder (ASR) for easy cleaning of the connection surfaces. This connector offers 2 to 32 channels. Both PC and APC terminations can be used within a standard D38999 housing and is suitable for multimode and single-mode applications. Robust circular connector Tri-Start locking Fiber optic data transmission up to 32 channels per connector Multi- or single-mode 1.25mm ferrule for PC or APC Circular connectors, connector accessories: backshells, caps, seals, and much more. Data transmission, fiber optic technology, Marine Bronze (B) Tri-Start thread, Defense, Aviation, Marine, Urban Air Mobility, Unmanned Systems, ARINC 801 approval, 2 to 32 channels, housing based on D38999, contact-protected design, multimode and singlemode, APC and PC polishing, standard ferrule 1.25 mm, insertion loss: 0.12 dB, return loss: > 65 dB, alignment sleeve holder (ASR) for easy cleaning of the connection surfaces, temperature resistance: -55°C to +125°C. Connectors & contacts
    More
  • VG96949 / USB Field
    VG96949 / USB Field
    USB Field with Tri-Start thread locking enables quick and tool-free retrofitting of standard patch cables to rugged connections for on-site installation. By integrating them into a D38999 housing, cables are reliably protected against moisture, vibrations, electromagnetic interference and other environmental influences. USB Field offers easy installation and increases the service life and operational reliability of USB connections in demanding applications, including Atex Zone 2 The VG96949 includes USB patch cables, molded installation housings equipped with a special insert for accommodating USB patch cables and connector housings including patch cables and backshells. The USB Field product range includes: Robust circular connectors and harnesses Tri-Start thread locking up to USB 3.2 high-speed data transfer Sealed against liquids and dust (IP67) Shock and vibration resistant VG96949, USBFTV, USB3FTV, USB3CFTV, µCom-USB3.2 & TVµCom-USB3.2, USBBFTV circular connectors, cables: sold by the meter, patch cables, cabling printed circuit board connectors, data transmission, EMI/RFI protection, hermetic connector, bulkhead feedthrough, zinc-tin (J), Amphenol Air LB product with VG approval Tri-Start thread Defense, Industry, Marine The solution supports transmission standards from USB 2.0 to USB 3.2. , USB data connector suitable for type A, B, C, mini, micro plugs, , housing design according to MIL-DTL-38999 III , Gr. 11 & 15, Tri-Start thread locking, Five guide grooves for effortless insertion, USB 2.0 / 3.0 memory stick up to 256GB, Quick installation on site, no special tools required, Zinc-Tin (J), EMI/RFI protection, Protection class: IP67, Operating temperature range: -40°C to +85°C (limited by the cable), VG96949: Version J, Sockets are potted on the back, USB 3.0 cable up to 3 meters long, USB 2.0 cable with 5 meters long, Type A or B connectors and cables
    More
  • VG95319-1016 D,E,F / MPO
    VG95319-1016 D,E,F / MPO
    The VG95319-1016 D, E, and F connectors accommodate MPO connectors (Multi-Fiber Push on Connector). The hermaphroditic inserts enable upgrading from an unprotected MPO connection to an MPO connection in a rugged housing, without the need for harnesses for on-site installation. Robster circular connectors Tri-Start thread locking For MPO connectors Suitable for standard MPO connectors / patch cables Installation without special tools Amphenol Air LB product with VG approval Circular connector Amphenol Air LB product with VG approval, Broadband transmission, Fiber optic technology, Marine Bronze (B), Zinc-Tin (J) Tri-Start thread defense, Marine suitable for standard MPO connectors & patch cables, Tri-Start thread locking, Five guide grooves for effortless mating, Tin Zinc (J), Marine Bronze (B), Protection class: IP68 (0.2 Bar/ 48h), Temperature range: Limited by MPO connector / patch cable (not included) connector
    More
  • VG95319-1009 / MIL-PRF-29504
    VG95319-1009 / MIL-PRF-29504
    Coaxial contacts Coaxial contacts for high-frequency applications with a matched impedance of 75 ohms. A low standing wave ratio and a wide frequency range up to 3 GHz enable interference-free and reliable use in high-resolution video systems (HD-SDI and 3G-SDI). Fiber Optic Contacts Our fiber optic contacts offer excellent optical and mechanical properties according to the stringent requirements of the MIL-PRF-29504 specification. Available for single-mode and multimode applications. The coaxial and fiber optic contacts are suitable for the following connectors: • VG95319 -1006, -1007, -1008, -1016 • MIL-DTL-38999 Series III • Amphenol TV/CTV 75 Ohm coaxial contacts Fiber optic contacts Video or data transmission Suitable for VG95319 -1006, -1007, -1008, -1016, MIL-DTL-38999 Series III, TV, CTV Coaxial: Characteristic impedance: 75Ω / Frequency range: 0-3 GHz Fiber optic: Insertion loss: 0.45 typical / Back reflection: better than -40dB Amphenol Air LB product with VG approval Connector accessories: backshells, caps, seals, and much more. Broadband transmission, data transmission, signal transmission, fiber optic technology, Amphenol Air LB product with VG approval Defense, Marine, Urban Air Mobility, Industry, Unmanned Systems COAXIAL CONTACTS:, Contact size: 8, Characteristic impedance: 75Ω, Frequency range: 0-3GHz, Permissible ambient temperature -65°C to +175°C , FIBER OPTIC CONTACTS:, Contact size 16 , Insertion loss: 0.45 typical (measured with 50/125mm fiber at 1300nm), Back reflection: better than -40dB with PC polishing, better than -50dB with UPC polishing, For single and multimode available in various fiber sizes, Permissible ambient temperature -65°C to +150°C Contacts
    More

Contacts & Termini

  • Crimp Contacts
    Crimp Contacts
    A Mil-Spec crimp contact - we make it! From standard crimp contacts to reduced crimp barrels or custom designed for unique wire or applications, Tri-Star is the leading manufacturer of crimp contacts for the Mil-Aero industry.
    More

RF Solutions

  • ECS Avionics RF Coaxial Assemblies
    ECS Avionics RF Coaxial Assemblies
    Each ECS brand avionics RF coaxial assembly is tested on our network analyzers to maintain high quality and ensure reliability. Insertion loss, phase matching, time delay, and VSWR are measured to verify performance and to meet your exact assembly requirements. RF assembly electrical profiles are documented, and a certificate of compliance is included with each shipset. Profiles are archived in our database to ensure repeatability. Individual phase-matched cables can be remanufactured rather than replacing an entire shipset.
    More

Sensors

Antenna Solutions

Cabling & Cable Harnesses

PCBs & Flex Products & Bus-Bars

Complex Systems & Assemblies

  • Temperature Controller
    Temperature Controller

    The LUETZE temperature controller simplifies heating control in rail applications by integrating the power output stages directly with the controller. Only PT1000 sensors and heating coils need to be connected, eliminating complex wiring between controller and heating controls. Each compact unit can operate up to four independent heating circuits, with power output stages capable of handling loads up to 10 A per circuit. This design reduces the need for multiple individual devices, resulting in significant cost and space savings while simplifying installation.

    More

Backshells & Attachment Solutions

  • Fixing Accessories and /System Attachments
    Fixing Accessories and /System Attachments
    We supply accessories such as cable holders, spacers, mounting rods and strips for securing, fastening and guiding cables, lines, wire bundles and cable harnesses of different diameters through aircraft and vehicles. Our product range includes: Fastening, positioning and routing of cables, wire bundles, pipes and conduits spacers Cable clamps Pipe holder and other accessories Cable clamps: PCL & 75P series, ABS2195 (CC5516 / CC5516 light), ABS 1339 (3262 / 3506 / CC1339 Light), Pipe supports: ABS series, pipe supports with along-axis or tangential orientation, PAN 4231, ABS2210, JN0413, Accessories for fastening or guiding: ABS 1695, ABS 1694, ABS 1688, ABS 1424, ABS 2225 (3540), ALBCBS, and other accessories such as spacers. Fastening & Guiding Solutions (EWIS): clamps, positioners, brackets. Defense, Aviation, Urban Air Mobility, Unmanned Systems, Marine. Approved for aviation, lightweight thermoplastic, complete offer for EWIS, for details see "Technical Information" section. Accessories
    More
  • M85049 / Backshell
    M85049 / Backshell
    End housings provide a pressure-tight seal for a connector and offer protection against electromagnetic interference, moisture, and dirt. Strap fastening also provides strain relief. Amphenol offers a complete range of end housings for aerospace, military, and other applications. End housing EMC protection Dirt and moisture protection Wide selection of cable outlets Various materials and surfaces Compatible with common round connectors Connector accessories: End housings, caps, seals, and more. EMI/RFI protection for defense, aviation, industry, urban air mobility, unmanned systems, and marine applications. Compliant with D38999 Series I, II, III, and IV, MIL-DTL-5015, MIL-DTL-83723, MIL-DTL-26482 Series II, JN1003, PAN6432-1-2, PAN6433-1-2, and more. End housings are available in various configurations: band adapters, double-cone adapters, single adapters, molded adapters, and adapters with strain relief clamps. Various materials and finishes are available, along with a wide selection of cable exits. EMI/RFI protection is provided. The temperature range corresponds to the respective connector series specified for the end housing.
    More

Power & Signal Connectors

Contact Form
Subscribe